Base station identification in single-frequency network positioning system under mixed line-of-sight/non-line-of-sight condition

2012 ◽  
Vol 6 (18) ◽  
pp. 3189-3195 ◽  
Author(s):  
J. Yan ◽  
L. Wu
2021 ◽  
Author(s):  
Paolo Carbone ◽  
Guido De Angelis ◽  
Valter Pasku ◽  
Alessio De Angelis ◽  
Marco Dionigi ◽  
...  

<div><div><div><p>This paper describes the design and realization of a Magnetic Indoor Positioning System. The system is entirely realized using off-the-shelf components and is based on inductive coupling between resonating coils. Both system-level architecture and realization details are described along with experimental results. The realized system exhibits a maximum positioning error of less than 10 cm in an indoor environment over a 3×3 m2 area. Extensive experiments in larger areas, in non-line-of-sight conditions, and in unfavorable geometric configurations, show sub-meter accuracy, thus validating the robustness of the system with respect to other existing solutions.</p></div></div></div>


2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Shixun Wu ◽  
Shengjun Zhang ◽  
Kai Xu ◽  
Darong Huang

In this paper, a localization scenario that the home base station (BS) measures time of arrival (TOA) and angle of arrival (AOA) while the neighboring BSs only measure TOA is investigated. In order to reduce the effect of non-line of sight (NLOS) propagation, the probability weighting localization algorithm based on NLOS identification is proposed. The proposed algorithm divides these range and angle measurements into different combinations. For each combination, a statistic whose distribution is chi-square in LOS propagation is constructed, and the corresponding theoretic threshold is derived to identify each combination whether it is LOS or NLOS propagation. Further, if those combinations are decided as LOS propagation, the corresponding probabilities are derived to weigh the accepted combinations. Simulation results demonstrate that our proposed algorithm can provide better performance than conventional algorithms in different NLOS environments. In addition, computational complexity of our proposed algorithm is analyzed and compared.


Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1238
Author(s):  
Javier San Martín ◽  
Ainhoa Cortés ◽  
Leticia Zamora-Cadenas ◽  
Bo Joel Svensson

In this paper, we analyze the performance of a positioning system based on the fusion of Ultra-Wideband (UWB) ranging estimates together with odometry and inertial data from the vehicle. For carrying out this data fusion, an Extended Kalman Filter (EKF) has been used. Furthermore, a post-processing algorithm has been designed to remove the Non Line-Of-Sight (NLOS) UWB ranging estimates to further improve the accuracy of the proposed solution. This solution has been tested using both a simulated environment and a real environment. This research work is in the scope of the PRoPART European Project. The different real tests have been performed on the AstaZero proving ground using a Radio Control car (RC car) developed by RISE (Research Institutes of Sweden) as testing platform. Thus, a real time positioning solution has been achieved complying with the accuracy requirements for the PRoPART use case.


Author(s):  
Vasin Chaoboworn ◽  
Yoschanin Sasiwat ◽  
Dujdow Buranapanichkit ◽  
Hiroshi Saito ◽  
Apidet Booranawong

In this paper, the communication reliability of a 2.4 GHz multi-hop wireless sensor network (WSN) in various test scenarios is evaluated through experiments. First, we implement an autonomous communication procedure for a multi-hop WSN on Tmote sky sensor nodes; 2.4 GHz, an IEEE 802.15.4 standard. Here, all nodes including a transmitter node (Tx), forwarder nodes (Fw), and a base station node (BS) can automatically work for transmitting and receiving data. The experiments have been tested in different scenarios including: i) in a room, ii) line-of-sight (LoS) communications on the 2nd floor of a building, iii) LoS and non-line-of-sight (NLoS) communications on the 1st floor to the 2nd floor, iv) LoS and NLoS communications from outdoor to the 1st and the 2nd floors of the building. The experimental results demonstrate that the communication reliability indicated by the packet delivery ratio (PDR) can vary from 99.89% in the case of i) to 14.40% in the case of iv), respectively. Here, the experiments reveal that multi-hop wireless commutations for outdoor to indoor with different floors and NLoS largely affect the PDR results, where the PDR more decreases from the best case (i.e., the case of a)) by 85.49%. Our research methodology and findings can be useful for users and researchers to carefully consider and deploy an efficient 2.4 GHz multi-hop WSN in their works, since different WSN applications require different communication reliability level.


Sign in / Sign up

Export Citation Format

Share Document