Robust stabilisation of uncertain time-delay dynamical systems with unknown bounds of uncertainties: a non-linear control method

2015 ◽  
Vol 9 (13) ◽  
pp. 2039-2046 ◽  
Author(s):  
Hansheng Wu
Author(s):  
S Yaqubi ◽  
MR Homaeinezhad

This article details a new Model Predictive Control algorithm ensuring robust stability and control feasibility for uncertain nonlinear multi-input multi-output dynamical systems considering uncertain time-delay effects. The proposed control algorithm is based on construction of a Lyapunov–Krasovskii functional as terminal cost. Incorporation of this terminal cost into the Model Predictive Control optimization problem and calculation of the associated admissible set result in robust feasibility and robust stability of closed-loop system in presence of uncertain time-delay effects and bounded disturbance signals. The Lyapunov–Krasovskii functional term is constructed with respect to predicted sliding functions over the prediction horizon and considers the effects of dynamical variations over the prediction horizon in generation of control inputs. As dynamical variations are investigated in a sample-to-sample basis, feasible sliding regions are updated at each sample as well. Finally, based on expression of sliding functions as a combination of dynamical variations and input-based terms, required control inputs are calculated in the admissible bound by the optimization algorithm. Construction of control scheme on this basis permits straightforward calculation of robust stability and feasibility conditions for a general class of uncertain nonlinear system in finite prediction horizon whereas in the previous works, often-restrictive conditions were considered for the investigated dynamical systems. Numerical illustrations indicate precision and efficiency of control algorithm and improved stability and convergence rate for multivariable nonlinear dynamical systems considering uncertain time-delay effects. Finally, hardware-in-the-loop implementation indicates applicability of the proposed scheme in real-time control applications particularly in case appropriate compromises between optimality and calculation speed are considered.


Author(s):  
Bo Song ◽  
Jian-Qiao Sun

This paper presents a study of controlling dynamical systems with uncertain and varying time delays. We apply the supervisory control algorithm to handle uncertainties in time delay. The hysteretic switching rule selects control gains out of the set of pre-determined optimal feedback gains for certain time delays in a range with known lower and upper bounds. The criterion is to judge when the system stays stable for any gains being selected and has a smaller switching index when the uncertain time delay varies in a known interval. A linear time-invariant system is used as an example to demonstrate the theoretical work.


2015 ◽  
Vol 719-720 ◽  
pp. 417-425 ◽  
Author(s):  
Husan Ali ◽  
Xian Cheng Zheng ◽  
Shahbaz Khan ◽  
Waseem Abbas ◽  
Dawar Awan

The switched mode dc-dc converters are some of the most widely used power electronics circuits because of high conversion efficiency and flexible output voltage. Many methods have been developed for the control of dc-dc converters. This paper deals with design of controller for dc-dc buck converter using various control techniques. The first two control techniques are based on classical or linear control methods i.e. PI and PID control, while the other two control technique are based on non linear control method i.e. Sliding Mode Control (SMC) and Sliding Mode Proportional Integral Derivative Control (SMC-PID). The output voltage and the inductor current of the applied control techniques are analyzed and compared in transient and steady state region. Also the robustness of the buck converter system is tested for load changes and input voltage variations. Matlab/Simulink is used for the simulations. The detailed simulation results are presented, which compare the performance of the designed controllers for various cases. The results show that the non linear control for DC/DC Buck converter proves to be more robust than linear control especially when dynamic tests are applied.


2010 ◽  
Vol 132 (6) ◽  
Author(s):  
Bo Song ◽  
Jian-Qiao Sun

A study of controlling dynamical systems with uncertain and varying time delays is presented in this paper. The uncertain time delay is assumed to fall in a range with known upper and lower bounds. We apply the supervisory control algorithm to deal with uncertainties in the time delay. An index is defined for each of the predetermined controls for a discrete set of time delays sampled from the range. Based on this index, a hysteretic switching rule selects a control from the predetermined controls with optimal feedback gains. Each predetermined control must be stable for any time delay in the range. Two control design methods are discussed, namely, the mapping method and a higher order approach. Examples of linear systems are used to demonstrate the theoretical work.


Sign in / Sign up

Export Citation Format

Share Document