scholarly journals Deformation monitoring of similar material model based on point cloud feature extraction

2019 ◽  
Vol 2019 (20) ◽  
pp. 6790-6794
Author(s):  
Baoxing Zhou ◽  
Yuhui Shan ◽  
Shoufeng Yao
Author(s):  
Mahdi Saleh ◽  
Shervin Dehghani ◽  
Benjamin Busam ◽  
Nassir Navab ◽  
Federico Tombari

2020 ◽  
Vol 14 (4) ◽  
pp. 445-453
Author(s):  
Qian Fan ◽  
Yiqun Zhu

AbstractIn order to solve the problem that the moving span of basic local mean decomposition (LMD) method is difficult to choose reasonably, an improved LMD method (ILMD), which uses three cubic spline interpolation to replace the sliding average, is proposed. On this basis, with the help of noise aided calculation, an ensemble improved LMD method (EILMD) is proposed to effectively solve the modal aliasing problem in original LMD. On the basis of using EILMD to effectively decompose the data of GNSS deformation monitoring series, GNSS deformation feature extraction model based on EILMD threshold denoising is given by means of wavelet soft threshold processing mode and threshold setting method in empirical mode decomposition denoising. Through the analysis of simulated data and the actual GNSS monitoring data in the mining area, the results show that denoising effect of the proposed method is better than EILMD, ILMD and LMD direct coercive denoising methods. It is also better than wavelet analysis denoising method, and has good adaptability. This fully demonstrates the feasibility and effectiveness of the proposed method in GNSS feature extraction.


2003 ◽  
Author(s):  
Kohji Hashimoto ◽  
Takeshi Ito ◽  
Takahiro Ikeda ◽  
Shigeki Nojima ◽  
Soichi Inoue

2011 ◽  
Vol 299-300 ◽  
pp. 1091-1094 ◽  
Author(s):  
Jiang Zhu ◽  
Yuichi Takekuma ◽  
Tomohisa Tanaka ◽  
Yoshio Saito

Currently, design and processing of complicated model are enabled by the progress of the CAD/CAM system. In shape measurement, high precision measurement is performed using CMM. In order to evaluate the machined part, the designed model made by CAD system the point cloud data provided by the measurement system are analyzed and compared. Usually, the designed CAD model and measured point cloud data are made in the different coordinate systems, it is necessary to register those models in the same coordinate system for evaluation. In this research, a 3D model registration method based on feature extraction and iterative closest point (ICP) algorithm is proposed. It could efficiently and accurately register two models in different coordinate systems, and effectively avoid the problem of localized solution.


Sign in / Sign up

Export Citation Format

Share Document