Component view [gas turbines]

2007 ◽  
Vol 21 (3) ◽  
pp. 42
Keyword(s):  
1969 ◽  
Vol 48 (10) ◽  
pp. 454
Author(s):  
H.E. Gresham ◽  
Eric Mensforth ◽  
L.R. Beesley ◽  
D. Wilkinson ◽  
R.E. Mills ◽  
...  

Author(s):  
A.A. Khalatov ◽  
◽  
I.N. Karp ◽  
Yu.G. Kutsan ◽  
◽  
...  

Author(s):  
QI CHEN ◽  
◽  
JINTAO SUN ◽  
JIANYU LIU ◽  
BAOMING ZHAO ◽  
...  

Plasma-assisted ignition and combustion, widely applied in gas turbines, scramjets, and internal combustion engines, has been considered as a promising technique in shortening ignition delay time, improving combustion energy efficiency, and reducing emission. Nonequilibrium plasma can excite the gas molecules to higher energy states, directly dissociate or ionize the molecules and, thereby, has the potential to produce reactive species at residence time and location in a combustible mixture and then to efficiently accelerate the overall pyrolysis, oxidation, and ignition. Previous studies have demonstrated the effectiveness of plasma-assisted combustion by using direct current, alternating currant, microwave, radio frequency, and pulsed nanosecond discharge (NSD). Due to the complicated interaction between plasma and combustion in different types of plasma, detailed plasma-combustion chemistry is still not well understood.


2020 ◽  
Vol 40 (9) ◽  
pp. 759-762
Author(s):  
V. M. Kraev ◽  
A. I. Tikhonov ◽  
M. V. Siluyanova

Alloy Digest ◽  
1987 ◽  
Vol 36 (1) ◽  

Abstract UDIMET 700 is a wrought nickel-base alloy produced by vacuum-induction melting and further refined by vacuum-arc remelting. It has excellent mechanical properties at high temperatures. Among its applications are blades for aircraft, marine and land-based gas turbines and rotor discs. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-51. Producer or source: Special Metals Corporation. Originally published March 1959, revised January 1987.


Alloy Digest ◽  
1966 ◽  
Vol 15 (7) ◽  

Abstract INCONEL alloy X-750 is an age-hardenable, nickel-chromium alloy used for its corrosion and oxidation resistance and high creep rupture strength at temperature up to 1500 F. It also has excellent properties at cryogenic temperatures. It was originally developed for use in gas turbines, but because of its low cost, high strength and weldability it has become the standards choice for a wide variety of applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-115. Producer or source: Huntington Alloy Products Division, An INCO Company.


Alloy Digest ◽  
1978 ◽  
Vol 27 (11) ◽  

Abstract UDIMET 718 is a nickel-base alloy that is precipitation hardenable. It exhibits exceptionally high yield strength up to 1300 F, excellent cryogenic properties down to -423 F and superior weldability even in the fully-aged condition. This unusual combination of characteristics makes it suitable for elevated-temperature applications in gas turbines and in critical components for missiles. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-258. Producer or source: Special Metals Corporation.


Alloy Digest ◽  
1963 ◽  
Vol 12 (1) ◽  

Abstract Jessop-Saville H.40 is an alloy steel recommended for high-temperature stressed components of gas turbines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-140. Producer or source: Jessop-Saville Ltd, Brightside Works.


2001 ◽  
Vol 18 (4) ◽  
pp. 231-239 ◽  
Author(s):  
D.P. Shepherd ◽  
A. Wisbey ◽  
G.F. Harrison ◽  
T.J. Ward ◽  
B. Vermeulen

Sign in / Sign up

Export Citation Format

Share Document