scholarly journals Four-Cable-Plane Spatial Cable Stayed Bridge with Two-Amplitude Curved Deck for Canyon-River

2021 ◽  
Vol 293 ◽  
pp. 02046
Author(s):  
Jilin Wang ◽  
JinFa Xu
Keyword(s):  
Bridge Engineering ◽  
Main Beam ◽  
Amplitude Curve ◽  
Analysis Model ◽  
Original Design ◽  
Element Analysis ◽  
Finite Element Analysis Model ◽  
Cable Stayed Bridge ◽  
Elliptical Ring ◽  
Engineering Parameters

On the basis of the original design of Ruck Bridge by Mr. Lin Tongyan, this paper modifies the single-amplitude curved cable-stayed bridge of Ruck Bridge to be an elliptical ring main beam of two-amplitude curved deck, with a duck-egg-shaped arch tower and a spatial cable net with four cable planes, to form a spatial four-cable-plane two-amplitude-curve cable-stayed bridge for the canyon-river topography, so as to improve the structural stress performance of the curved-beam cable-stayed bridge, promote the traffic function and improve the landscape. Combined with the 400m-span New Ruck Cable-stayed Bridge, engineering parameters are designed, a Midas finite element analysis model is established, and the dynamic modal analysis is carried out to verify the structural superiority of this new four-cable-plane spatial cable-stayed bridge with two-amplitude curved deck.

scholarly journals The design of super long span pedestrian landscape cable stayed bridge with sightseeing bridge tower

2021 ◽  
Vol 293 ◽  
pp. 02036
Author(s):  
Tao Jiang ◽  
BiQing Li
Keyword(s):  
Bridge Structure ◽  
Analysis Model ◽  
Element Analysis ◽  
Finite Element Analysis Model ◽  
Cable Stayed Bridge ◽  
Long Span ◽  
Tower Structure ◽  
Design Requirements ◽  
Duck Egg ◽  
Bridge Tower

According to the design requirements of the super long-span pedestrian landscape cable-stayed bridge in Lake view Park, a kind of sightseeing tower-style pedestrian landscape three-tower cable-stayed bridge structure system was proposed. Sightseeing tower type bridge tower structure and duck egg arched bridge tower replace traditional cable-stayed bridge tower structure. Through the establishment of Midas finite element analysis model, dynamic modal analysis research was carried out. The analysis shows that: the sightseeing tower structure and the cable-stayed bridge tower structure are combined into one, and the two have good structural matching.

scholarly journals Design of Flying-Bird Type Cable Stayed Arch Bridge with Three-Leaf Rose Shaped CFST Arch Rib

2021 ◽  
Vol 293 ◽  
pp. 02010
Author(s):  
Weisheng Wang ◽  
Jilin Wang
Keyword(s):  
Bending Moment ◽  
Internal Force ◽  
Analysis Model ◽  
Element Analysis ◽  
Finite Element Analysis Model ◽  
Arch Bridge ◽  
Cable Structure ◽  
Stay Cables ◽  
Engineering Parameters ◽  
Negative Bending

According to the geometric figure of three-leaf rose curve, this paper puts forward a flying-bird type cable-stayed arch bridge with three-leaf rose curve shaped CFST arch rib, which has beautiful appearance and one bridge leads to three banks.The space cables are set between the three-leaf rose linear space arch ribs to resist negative bending moment, and the tie cables are set between the arch feet to resist positive bending moment. On the inclined pylon at the tail of the flying-bird type cable-stayed arch bridge, the stay-cables are arranged to balance the arch thrust, and the suspension-cables are arranged on the three leaf rose linear spatial arch ribs to hang the three fork bridge deck.The flying-bird type cable-stayed arch bridge with three-leaf rose linear CFST arch rib adopts spatial cable structure system, which has good structural stability.Combined with the actual project, the engineering parameters are designed, the Midas finite element analysis model is established, the internal force analysis and modal analysis are carried out, and the rationality of flying-bird type cable-stayed arch bridge with three-leaf rose linear CFST arch rib is verified.

scholarly journals Design of the three-forked-shape pedestrian landscape cablestayed bridge with egg-shape arch tower

2021 ◽  
Vol 237 ◽  
pp. 03036
Author(s):  
Biqing Li ◽  
Jinbao Li ◽  
Jinfa Xu
Keyword(s):  
Mechanical Performance ◽  
Analysis Model ◽  
Element Analysis ◽  
Arch Bridge ◽  
Design Elements ◽  
Cable Stayed Bridge ◽  
Cultural Connotation ◽  
Egg Shape ◽  
Engineering Parameters ◽  
Bridge Tower

According to the landscape requirements of the pedestrian cable-stayed bridge of the three-forkedshape canyon, this paper puts forward a kind of pedestrian landscape cable-stayed bridge with egg-shape arch bridge tower, and two kinds of spatial curve design elements are introduced, which are egg-shape arch bridge and three-forked-shape curved bridge deck. The cultural connotation of three-forked-shape canyon has been greatly improved. Combined with the actual project, the engineering parameters are designed and the Midas finite element analysis model is established, static analysis and dynamic modal analysis were carried out, it verified that the three-forked-shape pedestrian landscape cable-stayed bridge with egg-shape arch bridge tower has good mechanical performance.

Modeling and experimental verification on directivity of an electret cell array loudspeaker

2012 ◽  
Vol 24 (3) ◽  
pp. 326-333 ◽  
Author(s):  
Yu-Chi Chen ◽  
Wen-Ching Ko ◽  
Han-Lung Chen ◽  
Hsu-Ching Liao ◽  
Wen-Jong Wu ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Digital Control System ◽  
Analysis Model ◽  
Cell Array ◽  
Element Analysis ◽  
Finite Element Analysis Model ◽  
The Finite Element Analysis ◽  
Directivity Characteristics

We propose a model to give us a method to investigate the characteristic three-dimensional directivity in an arbitrarily configured flexible electret-based loudspeaker. In recent years, novel electret loudspeakers have attracted much interest due to their being lightweight, paper thin, and possessing excellent mid- to high-frequency responses. Increasing or decreasing the directivity of an electret loudspeaker makes it excellent for adoption to many applications, especially for directing sound to a particular area or specific audio location. Herein, we detail a novel electret loudspeaker that possesses various directivities and is based on various structures of spacers instead of having to use multichannel amplifiers and a complicated digital control system. In order to study the directivity of an electret loudspeaker based on an array structure which can be adopted for various applications, the horizontal and vertical polar directivity characteristics as a function of frequency were simulated by a finite-element analysis model. To validate the finite-element analysis model, the beam pattern of the electret loudspeaker was measured in an anechoic room. Both the simulated and experimental results are detailed in this article to validate the various assertions related to the directivity of electret cell-based smart speakers.

The Mechanical Mechanism Analysis for Mortar Arch Framework Slope Protection Structure

2013 ◽  
Vol 859 ◽  
pp. 143-148
Author(s):  
Yang Xu ◽  
Ding Ling Li ◽  
Li Peng ◽  
Yan Xiao ◽  
Yi Hua Nie
Keyword(s):  
Finite Element Analysis ◽  
Mechanism Analysis ◽  
Analysis Model ◽  
Element Analysis ◽  
Finite Element Analysis Model ◽  
Vertical Loading ◽  
Total Displacement ◽  
The Finite Element Analysis ◽  
Calculation Results ◽  
Real Scale

The finite element analysis model was built as the real scale for mortar arch framework slope protection, and the displacement and strain at different points were collected by vertical loading pressure. So the mechanical mechanism can be studied, and the analysis was done between calculation results and testing results of solid miniature model. The studying results show that the point on the arch foot is the worst stress place for each arch, and the total displacement increase nonlinear as the distance from the slope top increases, and the bump phenomenon exists in the bottom of slope, the points are likely to be broken.

Wear analysis of eco-friendly non-asbestos friction-lining material applied in an automotive drum brake: Experimental and finite-element analysis

2021 ◽  
pp. 135065012110167
Author(s):  
Dinesh Shinde ◽  
Mukesh Bulsara ◽  
Jeet Patil
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Surface Wear ◽  
Analysis Model ◽  
Element Analysis ◽  
Finite Element Analysis Model ◽  
Drum Brake ◽  
Wear Analysis ◽  
Lining Material ◽  
Friction Lining

Brake friction lining material is the critical element of a braking system, since it provides friction resistance to the rotating drum for controlling automobiles. The present study involves wear analysis of newly developed eco-friendly non-asbestos friction lining material for automotive drum brake applications using experimental study, finite-element analysis, and microstructural investigations. Theoretical interpretation of braking force at different automobile speeds was derived using fundamentals. Specimen drum brake liner with eco-friendly material compositions was produced using an industrial hot compression molding process at one of the manufacturer. The surface wear of the liner was measured using an effective and accurate method. Furthermore, a finite-element analysis model was developed considering actual operating conditions and various components of the drum brake system. The model was elaborated for various result outcomes, including Von-Mises stresses and total deformation of components of the drum brake, and further used to estimate the surface wear of the friction lining material in terms of transverse directional deformation. Finally, microstructural analysis of the friction lining material was carried out using scanning electron microscopy and energy dispersive spectroscopy. From the results, it is seen that the developed friction lining material is wear resistant. The finite-element analysis model can be effectively utilized to study the tribological characteristics of friction lining materials.

Detailed Stress Analysis of a Spherical Acrylic Submersible by 3-D Finite Element Modeling

1999 ◽  
Author(s):  
Partha S. Das
Keyword(s):  
Finite Element ◽  
Numerical Modeling ◽  
Dissimilar Materials ◽  
Analysis Model ◽  
Element Analysis ◽  
Finite Element Analysis Model ◽  
New Model ◽  
Ocean Exploration ◽  
Near Future ◽  
First Time

Abstract Harbor Branch Oceanographic Institution (HBOI) designed, built and has operated two JOHNSON-SEA-LINK (JSL) manned submersibles for the past 25 years. The JSL submersibles each incorporate a 66–68 in. (1.6764–1.7272 m) OD, 4–5.25 in. (0.1016–0.13335 m) thick acrylic two-man sphere as a Pressure Vessel for Human Occupancy (PVHO). This type of spherical acrylic sphere or submersible was first introduced in around 1970 and is known as Naval Experimental Manned Observatory (NEMO) submersibles. As the demand increases for ocean exploration to 3000 ft. (914.4 m) depth to collect samples, to study the ocean surfaces, the problem of developing cracks at the interface of these manned acrylic submersibles following few hundred dives have become a common phenomena. This has drawn considerable attentions for reinvestigation of the spherical acrylic submersible in order to overcome this crack generation problem at the interface. Therefore, a new full-scale 3-D nonlinear FEA (Finite Element Analysis) model, similar to the spherical acrylic submersible that HBOI uses for ocean exploration, has been developed for the first time in order to simulate the structural behavior at the interface and throughout the sphere, for better understanding of the mechanical behavior. Variation of the stiffness between dissimilar materials at the interface, lower nylon gasket thickness, over designed aluminum hatch are seemed to be few of the causes for higher stresses within acrylic sphere at the nylon gasket/acrylic interface. Following the basic understanding of the stresses and relative displacements at the interface and within different parts of the submersible, various models have been developed on the basis of different shapes and thickness of nylon gaskets, openings of the acrylic sphere, hatch geometry and its materials, specifically to study their effect on the overall performance of the acrylic submersible. Finally, the new model for acrylic submersible has been developed by redesigning the top aluminum hatch and hatch ring, the sphere openings at both top and bottom, as well as the nylon gasket inserts. Altogether this new design indicates a significant improvement over the existing spherical acrylic submersible by reducing the stresses at the top gasket/acrylic interface considerably. Redesigning of the bottom penetrator plate, at present, is underway. In this paper, results from numerical modeling only are reported in details. Correlation between experimental-numerical modeling results for the new model will be reported in the near future.

Construction Monitoring on Steel Truss Bridge’s Maintenance and Reinforcement

2018 ◽  
Vol 878 ◽  
pp. 89-94 ◽  
Author(s):  
Er Lei Wang
Keyword(s):  
Simulation Analysis ◽  
Analysis Model ◽  
Element Analysis ◽  
Construction Monitoring ◽  
Finite Element Analysis Model ◽  
Bridge Steel ◽  
Steel Truss ◽  
Stress And Deformation ◽  
Site Test

Implementing monitoring over construction process of old bridge’s reinforcement serves as an important measure to ensure construction quality and safety and realize the goal of reinforcement. This paper, with a case study of the maintenance and reinforcement project of Zhicheng Yangtze River Bridge (steel truss highway-railway combined bridge), adopted MIDAS to establish finite element analysis model, and with stress and deformation as monitoring parameters, completed the construction monitoring work, numerical simulation analysis and site test for the reinforcement project.

Sign in / Sign up

Export Citation Format

Share Document