scholarly journals A Review – Renewable energy based micro-cogeneration and hybrid energy systems

2021 ◽  
Vol 294 ◽  
pp. 01004
Author(s):  
Sonja Kallio ◽  
Monica Siroux
Keyword(s):  
Renewable Energy ◽  
High Efficiency ◽  
Renewable Energy Sources ◽  
Energy Systems ◽  
Energy System ◽  
Primary Energy ◽  
Hybrid Energy ◽  
Hybrid Renewable Energy System ◽  
Hybrid Energy Systems ◽  
Hybrid Renewable Energy

To reduce carbon and greenhouse gas emissions, the more efficient and environmentally friendly energy production in the building sector is required. The deployment of renewable energy based microcogeneration units in the decentralized hybrid energy systems is a part of the solution. The micro combined heat and power (micro-CHP), or co-generation, units produce simultaneously heat and electricity from a single fuel source at high efficiency and close to the consumption point. These units offer significant benefits: reduced primary energy consumption, reduced CO2 emissions, and avoidance of distribution losses due to central plant and network construction. The objective of this paper is to present a review of available renewable energy based micro-CHP systems and to focus on the biomass and solar based conversion devices. Finally, a novel hybrid renewable energy system is presented by coupling renewable energy sources, such as solar and biomass for micro-CHP.

Optimum Design of Standalone Hybrid Energy Systems Minimizing Waste of Renewable Energy

2016 ◽  
Author(s):  
A. T. D. Perera
Keyword(s):  
Renewable Energy ◽  
Fuel Consumption ◽  
Renewable Energy Sources ◽  
Energy Systems ◽  
Energy System ◽  
Energy Sources ◽  
Solar Pv ◽  
Energy Potential ◽  
Hybrid Energy ◽  
Hybrid Energy Systems

The importance of integrating renewable energy sources into standalone energy systems is highlighted in recent literature. Maintaining energy efficiency is challenging in designing such hybrid energy systems (HES) due to seasonal variation of renewable energy potential. This study evaluates the limitations in minimizing the losses in renewable energy generated mainly due to energy storage limitations and minimizing fuel consumption of the internal combustion generator (ICG). A standalone hybrid energy system with Solar PV (SPV), wind, battery bank and an ICG is modeled and optimized in this work. Levelized Energy Cost (LEC), Waste of Renewable Energy (WRE) and Fuel Consumption (FC) are taken as objective functions. Results highlight the importance of considering WRE as an objective function which increase the mix of energy sources that can help to increase the reliability of the system.

scholarly journals Techno-Economic Analysis of a Novel Hydrogen-Based Hybrid Renewable Energy System for Both Grid-Tied and Off-Grid Power Supply in Japan: The Case of Fukushima Prefecture

2020 ◽  
Vol 10 (12) ◽  
pp. 4061 ◽  
Author(s):  
Naoto Takatsu ◽  
Hooman Farzaneh
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Economic Assessment ◽  
Energy System ◽  
Modeling Framework ◽  
Integrated Simulation ◽  
Hybrid Renewable Energy System ◽  
Renewable Energy System ◽  
Hybrid Renewable Energy

After the Great East Japan Earthquake, energy security and vulnerability have become critical issues facing the Japanese energy system. The integration of renewable energy sources to meet specific regional energy demand is a promising scenario to overcome these challenges. To this aim, this paper proposes a novel hydrogen-based hybrid renewable energy system (HRES), in which hydrogen fuel can be produced using both the methods of solar electrolysis and supercritical water gasification (SCWG) of biomass feedstock. The produced hydrogen is considered to function as an energy storage medium by storing renewable energy until the fuel cell converts it to electricity. The proposed HRES is used to meet the electricity demand load requirements for a typical household in a selected residential area located in Shinchi-machi in Fukuoka prefecture, Japan. The techno-economic assessment of deploying the proposed systems was conducted, using an integrated simulation-optimization modeling framework, considering two scenarios: (1) minimization of the total cost of the system in an off-grid mode and (2) maximization of the total profit obtained from using renewable electricity and selling surplus solar electricity to the grid, considering the feed-in-tariff (FiT) scheme in a grid-tied mode. As indicated by the model results, the proposed HRES can generate about 47.3 MWh of electricity in all scenarios, which is needed to meet the external load requirement in the selected study area. The levelized cost of energy (LCOE) of the system in scenarios 1 and 2 was estimated at 55.92 JPY/kWh and 56.47 JPY/kWh, respectively.

scholarly journals Dynamic Stability Enhancement of a Hybrid Renewable Energy System in Stand-Alone Applications

Computation ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 14
Author(s):  
Ezzeddine Touti ◽  
Hossem Zayed ◽  
Remus Pusca ◽  
Raphael Romary
Keyword(s):  
Renewable Energy ◽  
Energy Systems ◽  
Experimental Tests ◽  
Energy System ◽  
Induction Generator ◽  
Technical Solution ◽  
Hybrid Energy ◽  
Wind Speeds ◽  
Hybrid Renewable Energy System ◽  
Stability Enhancement

Renewable energy systems have been extensively developed and they are attractive to become widespread in the future because they can deliver energy at a competitive price and generally do not cause environmental pollution. However, stand-alone energy systems may not be practical for satisfying the electric load demands, especially in places having unsteady wind speeds with high unpredictability. Hybrid energy systems seem to be a more economically feasible alternative to satisfy the energy demands of several isolated clients worldwide. The combination of these systems makes it possible to guarantee the power stability, efficiency, and reliability. The aim of this paper is to present a comprehensive analysis and to propose a technical solution to integrate a self-excited induction generator in a low power multisource system. Therefore, to avoid the voltage collapsing and the machine demagnetization, the various parameters have to be identified. This procedure allows for the limitation of a safe operating area where the best stability of the machine can be obtained. Hence, the load variation interval is determined. An improvement of the induction generator stability will be analyzed. Simulation results will be validated through experimental tests.

A Review on Optimization Modeling of Hybrid Energy Systems

2020 ◽  
pp. 29-62
Author(s):  
Marwa Mallek ◽  
Jalel Euchi ◽  
Yacin Jerbi
Keyword(s):  
Solar Wind ◽  
Renewable Energy ◽  
Rural Areas ◽  
Renewable Energy Sources ◽  
Energy Systems ◽  
Health Impact ◽  
Health Impacts ◽  
Energy Sources ◽  
Hybrid Energy ◽  
Hybrid Energy Systems

Hybrid energy systems (HESs) are an excellent solution for electrification of remote rural areas where the grid extension is difficult or not economical. Usually, HES generally integrate one or several renewable energy sources such as solar, wind, hydropower, and geothermal with fossil fuel powered diesel/petrol generator to provide electric power where the electricity is either fed directly into the grid or to batteries for energy storage. This chapter presents a review on the solution approaches for determining the HES systems based on various objective functions (e.g. economic, social, technical, environmental and health impact). In order to take account of environmental and health impacts from energy systems, several energy optimization model was developed for minimizing pollution and maximizing the production of renewable energy.

Techno-Economic Evaluation of Stand-alone Hybrid Renewable Energy System for Remote Village Using HOMER-Pro Software

2017 ◽  
Vol 6 (2) ◽  
pp. 74 ◽  
Author(s):  
Ajoya Kumar Pradhan ◽  
Mahendra Kumar Mohanty ◽  
Sanjeeb Kumar Kar
Keyword(s):  
Renewable Energy ◽  
Wind Speed ◽  
Optimization Design ◽  
Unit Cost ◽  
Flow Analysis ◽  
Energy System ◽  
Hybrid Energy ◽  
Hybrid Renewable Energy System ◽  
Cost Of Energy ◽  
Hybrid Renewable Energy

The off-grid hybrid renewable energy generation system has lesser cost of energy with higher reliability when compared with solar photovoltaic (PV) or wind energy system individually. The optimization design is worked out by reducing the unit cost of energy (UCOE) for different case studies and comparing the outcomes obtained by the use of HOMER-Pro (Hybrid Optimization Model of Electric Renewable) software. The optimal cash flow analysis of hybrid energy system is based on the load patterns is discussed, solar irradiance (kW/m2) of site at proper latitude and longitude, wind speed and price of diesel, which is collected from a remote village in Khurda District, Odisha in India. Moreover, the optimization and sensitivity results of the system are find out by varying the input parameters like solar radiation, wind speed etc.

scholarly journals Notes on the Economics of Residential Hybrid Energy System

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2639
Author(s):  
Mahelet G. Fikru ◽  
Gregory Gelles ◽  
Ana-Maria Ichim ◽  
Joseph D. Smith
Keyword(s):  
Renewable Energy ◽  
Energy Systems ◽  
Energy System ◽  
Economic Feasibility ◽  
Energy Output ◽  
Small Scale ◽  
Hybrid Energy System ◽  
Hybrid Energy ◽  
Residential Sector ◽  
Hybrid Renewable Energy

Despite advances in small-scale hybrid renewable energy technologies, there are limited economic frameworks that model the different decisions made by a residential hybrid system owner. We present a comprehensive review of studies that examine the techno-economic feasibility of small-scale hybrid energy systems, and we find that the most common approach is to compare the annualized life-time costs to the expected energy output and choose the system with the lowest cost per output. While practical, this type of benefit–cost analysis misses out on other production and consumption decisions that are simultaneously made when adopting a hybrid energy system. In this paper, we propose a broader and more robust theoretical framework—based on production and utility theory—to illustrate how the production of renewable energy from multiple sources affects energy efficiency, energy services, and energy consumption choices in the residential sector. Finally, we discuss how the model can be applied to guide a hybrid-prosumer’s decision-making in the US residential sector. Examining hybrid renewable energy systems within a solid economic framework makes the study of hybrid energy more accessible to economists, facilitating interdisciplinary collaborations.

scholarly journals Techno Economic Assessment of Hybrid Renewable Energy Systems Based on Power to Hydrogen and Methane Gas Concepts

2018 ◽  
Author(s):  
Ahmed Boubenia ◽  
Ahmed Hafaifa ◽  
Abdellah Kouzou ◽  
Mohamed Becherif
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Renewable Energy Sources ◽  
Economic Assessment ◽  
Energy System ◽  
Photovoltaic System ◽  
Hybrid Renewable Energy System ◽  
Micro Turbine ◽  
The Stability ◽  
Hybrid Renewable Energy

This paper deals with the techno-economic study of the hybrid renewable energy system based on energy storage aspect under the form of hydrogen and methane. Indeed, with the intermittency of the renewable energy sources such as photovoltaic and wind energy, several problems of produced energy injection to the power system network can be encountered due to the shortage or the excess of these sources. This situation appeals the use of systems that ensure the stability of network based on the storage of energy surplus into gas using electrolyzer systems, which will be used afterward to cover the eventual shortage. In the present paper, the study of performance of each pathway of methane and hydrogen storage has been performed by the treatment of multiple scenarios via different architecture case studies in an Algerian location. Whereas, the energy produced by the photovoltaic system, the wind energy and the gas micro turbine sources are considered similar in each case. The modeling and simulation of the studied system operation under optimization criteria has been performed in this work, where the main aim is to define the appropriate configuration taking into account the different with low costs of investment, maintenance operation and immediate reactivity with a big storage capacity.

scholarly journals A comparative approach between different optimize result in hybrid energy system using HOMER

2019 ◽  
Vol 9 (1) ◽  
pp. 141
Author(s):  
Shweta Goyal ◽  
Sachin Mishra ◽  
Anamika Bhatia
Keyword(s):  
Renewable Energy ◽  
Energy System ◽  
Physical Contact ◽  
Comparative Approach ◽  
Renewable Sources ◽  
Hybrid Energy System ◽  
Hybrid Energy ◽  
Hybrid Renewable Energy System ◽  
Reliability Issue ◽  
Hybrid Renewable Energy

<p>To compare the different result of optimization of a hybrid energy system. A hybrid renewable energy system (HRES) is the combination of renewable and non-renewable sources which is playing a very important role for rural area electrification when grid extension is not possible or excessively expensive. Non renewable sources like diesel power generator (optional) are used in a HRES for backup when renewable energy supply is not sufficient. While the HRES is very important due to the smallest natural and physical contact compared to non renewable sources, this work proposed a comparison outcome with the help of different component by using HOMER software and get best optimize result for the model. This paper presents a wide-ranging review of various aspects of HRES. This paper discusses study, best sizing, and model, organize aspect and reliability issue.</p>

scholarly journals Techno-Economic Evaluation of Interconnected Nuclear-Renewable Micro Hybrid Energy Systems with Combined Heat and Power

Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1642 ◽  
Author(s):  
Hossam A. Gabbar ◽  
Muhammad R. Abdussami ◽  
Md. Ibrahim Adham
Keyword(s):  
Fossil Fuel ◽  
Renewable Energy Sources ◽  
Ghg Emissions ◽  
Energy Systems ◽  
Energy System ◽  
Combined Heat And Power ◽  
Small Scale ◽  
Hybrid Energy ◽  
Hybrid Energy Systems ◽  
The Impact

Renewable energy sources (RESs) play an indispensable role in sustainable advancement by reducing greenhouse gas (GHG) emissions. Nevertheless, due to the shortcomings of RESs, an energy mix with RESs is required to support the baseload and to avoid the effects of RES variability. Fossil fuel-based thermal generators (FFTGs), like diesel generators, have been used with RESs to support the baseload. However, using FFTGs with RESs is not a good option to reduce GHG emissions. Hence, the small-scale nuclear power plant (NPPs), such as the micro-modular reactor (MMR), have become a modern alternative to FFTGs. In this paper, the authors have investigated five different hybrid energy systems (HES) with combined heat and power (CHP), named ‘conventional small-scale fossil fuel-based thermal energy system,’ ‘small-scale stand-alone RESs-based energy system,’ ‘conventional small-scale fossil fuel-based thermal and RESs-based HES,’ ‘small-scale stand-alone nuclear energy system,’ and ‘nuclear-renewable micro hybrid energy system (N-R MHES),’ respectively, in terms of net present cost (NPC), cost of energy (COE), and GHG emissions. A sensitivity analysis was also conducted to identify the impact of the different variables on the systems. The results reveal that the N-R MHES could be the most suitable scheme for decarbonization and sustainable energy solutions.

Optimization of Hybrid Renewable Energy System (HRES) Using Modified Evolutionary Strategy for Cost Minimization

2015 ◽  
Vol 785 ◽  
pp. 546-550
Author(s):  
Ahmad Syazwan Aznan ◽  
Ismail Musirin ◽  
Siti Aliyah Mohd Saleh ◽  
Nur Azzammudin Rahmat
Keyword(s):  
Renewable Energy ◽  
Distribution System ◽  
Cost Minimization ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Evolutionary Strategy ◽  
Hybrid Renewable Energy System ◽  
Renewable Energy System ◽  
The Cost ◽  
Hybrid Renewable Energy

Recently, renewable energy has been in place to cater the depreciation of main energy. The presence of renewable energy sources can be made in hybrid to satisfy the demand in the distribution system. Nevertheless, the growth in number for renewable energy could lead to cost increment. This paper presents the optimization process of Hybrid Renewable Energy System (HRES) using Modified Evolutionary Strategy (ES) technique for cost minimization. The study involves the development of optimization engine for modified ES in order to solve the cost minimization of HRES. The improved version of ES is expected to address the computation burden experienced by the traditional ES technique. Results obtained from the implementation of the modified ES managed to reveal that its implementation is worth in terms of minimizing the cost

Sign in / Sign up

Export Citation Format

Share Document