scholarly journals Assessment of Concrete Compressive Strength by Ultrasonic Non-Destructive Test

2021 ◽  
Vol 318 ◽  
pp. 03004
Author(s):  
AbdulMuttalib I. Said ◽  
Baqer Abdul Hussein Ali
Keyword(s):  
Compressive Strength ◽  
Salt Content ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Experimental Program ◽  
Concrete Compressive Strength ◽  
Statistical Program ◽  
Non Destructive ◽  
Accurate Relation

This paper has carried out an experimental program to establish a relatively accurate relation between the ultrasonic pulse velocity (UPV) and the concrete compressive strength. The program involved testing concrete cubes of (100) mm and prisms of (100×100×300) cast with specified test variables. The samples are tested by using ultrasonic test equipment with two methods, direct ultrasonic pulse (DUPV) and surface (indirect) ultrasonic pulse (SUPV) for each sample. The obtained results were used as input data in the statistical program (SPSS) to predict the best equation representing the relation between the compressive strength and the ultrasonic pulse velocity. In this research 383 specimens were tested, and an exponential equation is proposed for this purpose. The statistical program has been used to prove which type of UPV is more suitable, the (SUPV) test or the (DUPV) test, to represent the relation between the ultrasonic pulse velocity and the concrete compressive strength. In this paper, the effect of salt content on the connection between the ultrasonic pulse velocity and the concrete compressive strength has also been studied.

Estimating the Concrete Compressive Strength by Using the Concrete Ultrasonic Pulse Velocity and Moduli of Elasticity

2021 ◽  
Vol 1164 ◽  
pp. 77-86
Author(s):  
Bogdan Bolborea ◽  
Sorin Dan ◽  
Claudiu Matei ◽  
Aurelian Gruin ◽  
Cornelia Baeră ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Ultrasonic Testing ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
High Rate ◽  
Concrete Compressive Strength ◽  
Destructive Testing ◽  
Non Destructive ◽  
Moduli Of Elasticity

Developing a non-destructive method which delivers fast, accurate and non-invasive results regarding the concrete compressive strength, is an important issue, currently investigated by many researchers all over the world. Different methodologies, like using the simple non-destructive testing (NDT) or the fusion of different techniques approach, were taken into consideration in order to find the optimal, most suitable method. The purpose of this paper is to present a new approach in this direction. The methodology consists in predicting the concrete compressive strength through ultrasonic testing, for non-destructive determination of the dynamic and static moduli of elasticity. One important, basic assumption of the proposed methodology considers values provided by technical literature for concrete dynamic Poisson’s coefficient. The air-dry density was experimentally determined on concrete cores. The dynamic modulus of elasticity was also experimentally determined by using the ultrasonic pulse velocity (UPV) method on concrete cores. Further on, the static modulus of elasticity and the concrete compressive strength can be mathematically calculated, by using the previously mentioned parameters. The experimental procedures were performed on concrete specimens, namely concrete cores extracted from the raft foundation of a multistorey building; initially they were subjected to the specific NDT, namely ultrasonic testing, and the validation of the results and the proposed methodology derives from the destructive testing of the specimens. The destructive testing is generally recognized as the most trustable method. The precision of the proposed method, established with respect to the destructive testing, revealed a high level of confidence, exceeding 90% (as mean value). It was noticed that even the cores with compressive strength outside of mean range interval (minimum and maximum values) presented high rate of precision, not influencing the overall result. The high rate of accuracy makes this method a suitable research background for further investigations, in order to establish a reliable NDT methodology which could substitute the very invasive and less convenient, destructive method.

Adapting ANNs in SONREB Test to Estimate Concrete Compressive Strength

2018 ◽  
Vol 792 ◽  
pp. 166-169
Author(s):  
Yu Ren Wang ◽  
Loan T.Q. Ngo ◽  
Yi Fan Shih ◽  
Yen Ling Lu ◽  
Yi Ming Chen
Keyword(s):  
Compressive Strength ◽  
Estimation Error ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Percentage Error ◽  
Non Destructive Testing ◽  
Concrete Compressive Strength ◽  
Destructive Testing ◽  
Non Destructive

SONREB method is a non-destructive testing (NDT) method for estimating the concrete compressive strength. It is conducted by combining two popular NDT methods: ultrasonic pulse velocity (UPV) test and rebound hammer (RH) test. Several researches have been attempted to find the correlation of the different testing method data with actual compressive strength. This research proposes a new Artificial Intelligence based approach, Artificial Neural Networks (ANNs), to estimate the concrete compressive strength using the UPV and RH test data. Data from a total of 315 cylinder concrete samples are collected to develop and validate the ANFIS prediction model. The model prediction results are compared with actual compressive strength using mean absolute percentage error (MAPE). With the adaption of ANFIS, the estimation error of SONREB test can be reduced to 5.98% (measured by MAPE).

scholarly journals Empirical Formula for Assessment Concrete Compressive Strength by Using Ultrasonic Pulse Velocity

2018 ◽  
Vol 7 (4.20) ◽  
pp. 113
Author(s):  
Hameed Shakir Al-Aasm
Keyword(s):  
Compressive Strength ◽  
Empirical Formula ◽  
Salt Content ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Fine Aggregate ◽  
Acceptable Error ◽  
Statistical Program ◽  
Compressive Strength Of Concrete

Statistical practical program was carried out to establish a fairly accurate empirical formula between compressive strength of concrete and ultrasonic pulse velocity. The work has a strong empirical base, but it is firmly governed by theory. In concrete, the compressive strength of concrete is related to the type, proportion and physical properties of aggregate but it is well known to be intensely affected by the properties of the cement paste, which relate, mainly, to the w/c ratio. The other variables such as age and density of concrete, salt content in fine aggregate and curing method have a relatively little effect on compressive strength of concrete. Therefore, the program involves field testing of reinforced concrete members that their w/c ratio and cube uniaxial compressive strength are known. The results were used as input data in statistical program (SPSS) to develop an empirical formula between the compressive strength of concrete and ultrasonic pulse velocity. The proposed formula was confirmed by the results of previous experiments. Although the relationship between the compressive strength of concrete and ultrasonic pulse velocity physically indirect, the statistical program revealed that the pulse velocity test could be used with acceptable error in evaluating the compressive strength of concrete.  

scholarly journals Statistical Equations to Estimate the In-situ Concrete Compressive Strength from Non-destructive Tests

2018 ◽  
Vol 24 (11) ◽  
pp. 53
Author(s):  
Ahmed Faleh Al-Bayati
Keyword(s):  
Compressive Strength ◽  
Linear Regression Analysis ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
The Third ◽  
Non Destructive

The aim of this study is to propose reliable equations to estimate the in-situ concrete compressive strength from the non-destructive test. Three equations were proposed: the first equation considers the number of rebound hummer only, the second equation consider the ultrasonic pulse velocity only, and the third equation combines the number of rebound hummer and the ultrasonic pulse velocity. The proposed equations were derived from non-linear regression analysis and they were calibrated with the test results of 372 concrete specimens compiled from the literature. The performance of the proposed equations was tested by comparing their strength estimations with those of related existing equations from literature. Comparisons revealed that the proposed ultrasonic pulse velocity and combined equations achieved better agreements with the test results than the related existing equations, whereas the proposed and the existing rebound hummer equations were inconsistent.  

PENGKAJIAN KEKUATAN BETON STRUKTUR JEMBATAN PASCA KEBAKARAN

2013 ◽  
Vol 12 (3) ◽  
Author(s):  
Sudarmadi Sudarmadi
Keyword(s):  
Compressive Strength ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Strength Assessment ◽  
Concrete Testing

In this paper a case study about concrete strength assessment of bridge structure experiencing fire is discussed. Assessment methods include activities of visual inspection, concrete testing by Hammer Test, Ultrasonic Pulse Velocity Test, and Core Test. Then, test results are compared with the requirement of RSNI T-12-2004. Test results show that surface concrete at the location of fire deteriorates so that its quality is decreased into the category of Very Poor with ultrasonic pulse velocity ranges between 1,14 – 1,74 km/s. From test results also it can be known that concrete compressive strength of inner part of bridge pier ranges about 267 – 274 kg/cm2 and concrete compressive strength of beam and plate experiencing fire directly is about 173 kg/cm2 and 159 kg/cm2. It can be concluded that surface concrete strength at the location of fire does not meet the requirement of RSNI T-12-2004. So, repair on surface concrete of pier, beam, and plate at the location of fire is required.

Non-Destructive Testing for Concrete: Dynamic Modulus and Ultrasonic Velocity Measurements

2011 ◽  
Vol 243-249 ◽  
pp. 165-169 ◽  
Author(s):  
Iqbal Khan Mohammad
Keyword(s):  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
Dynamic Modulus ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Non Destructive Testing ◽  
Destructive Testing ◽  
Dynamic Modulus Of Elasticity ◽  
Non Destructive

Nondestructive testing (NDT) is a technique to determine the integrity of a material, component or structure. The commonly NDT methods used for the concrete are dynamic modulus of elasticity and ultrasonic pulse velocity. The dynamic modulus of elasticity of concrete is related to the structural stiffness and deformation process of concrete structures, and is highly sensitive to the cracking. The velocity of ultrasonic pulses travelling in a solid material depends on the density and elastic properties of that material. Non-destructive testing namely, dynamic modulus of elasticity and ultrasonic pulse velocity was measured for high strength concrete incorporating cementitious composites. Results of dynamic modulus of elasticity and ultrasonic pulse velocity are reported and their relationships with compressive strength are presented. It has been found that NDT is reasonably good and reliable tool to measure the property of concrete which also gives the fair indication of the compressive strength development.

scholarly journals Using Support Vector Machine to Improve Ultrasonic Pulse Velocity Test for Concrete

2018 ◽  
Vol 207 ◽  
pp. 01001
Author(s):  
Tu Quynh Loan Ngo ◽  
Yu-Ren Wang
Keyword(s):  
Compressive Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Support Vector ◽  
Non Destructive Testing ◽  
Testing Methods ◽  
Destructive Testing ◽  
Compressive Strength Of Concrete ◽  
Non Destructive

In the construction industry, to evaluate the compressive strength of concrete, destructive and non-destructive testing methods are used. Non-destructive testing methods are preferable due to the fact that those methods do not destroy concrete samples. However, they usually give larger percentage of error than using destructive tests. Among the non-destructive testing methods, the ultrasonic pulse velocity test is the popular one because it is economic and very simple in operation. Using the ultrasonic pulse velocity test gives 20% MAPE more than using destructive tests. This paper aims to improve the ultrasonic pulse velocity test results in estimating the compressive strength of concrete using the help of artificial intelligent. To establish a better prediction model for the ultrasonic pulse velocity test, data collected from 312 cylinder of concrete samples are used to develop and validate the model. The research results provide valuable information when using the ultrasonic pulse velocity tests to the inputs data in addition with support vector machine by learning algorithms, and the actual compressive strengths are set as the target output data to train the model. The results show that both MAPEs for the linear and nonlinear regression models are 11.17% and 17.66% respectively. The MAPE for the support vector machine models is 11.02%. These research results can provide valuable information when using the ultrasonic pulse velocity test to estimate the compressive strength of concrete.

scholarly journals Non Destructive Studies on Engineered Cementitious Composites using Microsilica & Polypropylene Fibre

2019 ◽  
Vol 8 (2S5) ◽  
pp. 18-21
Keyword(s):  
Compressive Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Mineral Admixture ◽  
Cementitious Composites ◽  
Engineered Cementitious Composites ◽  
Polypropylene Fibres ◽  
Curing Regimes ◽  
Non Destructive

This study focuses on assessing the durability property of engineered cementitious composites using Ultrasonic pulse velocity method (direct and semi direct) to compute the compressive strength. Even the effect of mineral admixture on the mortar properties for different curing regimes shall be determined using this method. Mortar specimens containing microsilica in different percentages ranging from 5% to 25%, replacing portland cement by weight and adding polypropylene fibres ranging from 0.5% to 2% are chosen for evaluation. 20% of microsilica and 2% of polypropylene fibres induced to increase the range of UPV from 3463 m/s to 3505 m/s for 7 and 28 day curing regimes and also the compressive strength significantly improved for the above constituent. However there was a marginal decrease in the compressive strength and UPV outcomes when cement is replaced by microsilica greater than 20%. A relationship had been framed between ultrasound pulse velocity and compressive strength.

Sign in / Sign up

Export Citation Format

Share Document