scholarly journals Monitoring aquatic plants: An evaluation of hydroacoustic, on-site digitising and airborne remote sensing techniques

2019 ◽  
pp. 27 ◽  
Author(s):  
Jerom R. Stocks ◽  
Michael P. Rodgers ◽  
Joe B. Pera ◽  
Dean M. Gilligan
Keyword(s):  
Remote Sensing ◽  
Aquatic Macrophytes ◽  
Spatial Scales ◽  
Sidescan Sonar ◽  
Plant Management ◽  
Line Transect ◽  
Specific Method ◽  
Airborne Remote Sensing ◽  
Single Beam ◽  
Eastern Australia

Aquatic macrophytes are often monitored to detect change in ecosystem function and state, as well as assessing the effectiveness of invasive aquatic plant management. This study compares seven methodologies to monitor the distribution and abundances of aquatic macrophytes. Four line transect methodologies and three spatial mapping techniques were employed in parallel over a broad turbidity gradient in two lentic habitats of south-eastern Australia. The methodologies examined included hydroacoustic surveys, on-site digitising, and digitisation of airborne remote sensing imagery. Variation in estimates of macrophyte coverage were observed between methodologies. Consistency in the collection and interpretation of data was greatest for the line transect methodologies and the digitisation of satellite imagery. Duel-frequency identification sonar proved to be an effective novel hydroacoustic technique to monitor macrophyte abundances over broad spatial scales. Single beam sonar transects was also an objective, repeatable and scalable methodology. Videography and on-site handheld PDA mapping were of limited utility due to restrictions imposed by turbidity. The utility of sidescan sonar could be improved when used in conjunction with on-site handheld PDA mapping. This study outlines important considerations when selecting a methodology to monitor macrophyte distribution and abundance. Results indicate that no one specific method can be employed across all macrophyte monitoring studies. The method or combination of methods employed during macrophyte monitoring studies is dependent upon the study objectives, budget and environmental conditions of the study site.

scholarly journals Airborne Remote Sensing of the Upper Ocean Turbulence during CASPER-East

2018 ◽  
Vol 10 (8) ◽  
pp. 1224
Author(s):  
Ivan Savelyev ◽  
William Miller ◽  
Mark Sletten ◽  
Geoffrey Smith ◽  
Dana Savidge ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Spatial Scales ◽  
Infrared Camera ◽  
Acoustic Doppler Current Profiler ◽  
Ocean Surface ◽  
Upper Ocean ◽  
Airborne Remote Sensing ◽  
Ocean Turbulence ◽  
Ocean Surface Currents ◽  
Current Profiler

This study takes on the challenge of resolving upper ocean surface currents with a suite of airborne remote sensing methodologies, simultaneously imaging the ocean surface in visible, infrared, and microwave bands. A series of flights were conducted over an air-sea interaction supersite established 63 km offshore by a large multi-platform CASPER-East experiment. The supersite was equipped with a range of in situ instruments resolving air-sea interface and underwater properties, of which a bottom-mounted acoustic Doppler current profiler was used extensively in this paper for the purposes of airborne current retrieval validation and interpretation. A series of water-tracing dye releases took place in coordination with aircraft overpasses, enabling dye plume velocimetry over 100 m to 10 km spatial scales. Similar scales were resolved by a Multichannel Synthetic Aperture Radar, which resolved a swath of instantaneous surface velocities (wave and current) with 10 m resolution and 5 cm/s accuracy. Details of the skin temperature variability imprinted by the upper ocean turbulence were revealed in 1–14,000 m range of spatial scales by a mid-wave infrared camera. Combined, these methodologies provide a unique insight into the complex spatial structure of the upper ocean turbulence on a previously under-resolved range of spatial scales from meters to kilometers. However, much attention in this paper is dedicated to quantifying and understanding uncertainties and ambiguities associated with these remote sensing methodologies, especially regarding the smallest resolvable turbulent scales and reference depths of retrieved currents.

scholarly journals Quantitative experimental comparison of single-beam, sidescan, and multibeam benthic habitat maps

2010 ◽  
Vol 67 (8) ◽  
pp. 1766-1779 ◽  
Author(s):  
Alexandre C. G. Schimel ◽  
Terry R. Healy ◽  
David Johnson ◽  
Dirk Immenga
Keyword(s):  
Remote Sensing ◽  
Marine Reserve ◽  
Similarity Measures ◽  
Experimental Comparison ◽  
Sidescan Sonar ◽  
Benthic Habitat ◽  
Map Comparison ◽  
Single Beam ◽  
Seabed Classification

Abstract Schimel, A. C. G., Healy, T. R., Johnson, D., and Immenga, D. 2010. Quantitative experimental comparison of single-beam, sidescan, and multibeam benthic habitat maps. – ICES Journal of Marine Science, 67: 1766–1779. Map comparison is a relatively uncommon practice in acoustic seabed classification to date, contrary to the field of land remote sensing, where it has been developed extensively over recent decades. The aim here is to illustrate the benefits of map comparison in the underwater realm with a case study of three maps independently describing the seabed habitats of the Te Matuku Marine Reserve (Hauraki Gulf, New Zealand). The maps are obtained from a QTC View classification of a single-beam echosounder (SBES) dataset, manual segmentation of a sidescan sonar (SSS) mosaic, and automatic classification of a backscatter dataset from a multibeam echosounder (MBES). The maps are compared using pixel-to-pixel similarity measures derived from the literature in land remote sensing. All measures agree in presenting the MBES and SSS maps as the most similar, and the SBES and SSS maps as the least similar. The results are discussed with reference to the potential of MBES backscatter as an alternative to SSS mosaic for imagery segmentation and to the potential of joint SBES–SSS survey for improved habitat mapping. Other applications of map-similarity measures in acoustic classification of the seabed are suggested.

Application of Remote Sensing in Agriculture

2014 ◽  
Vol 13 (1) ◽  
Author(s):  
Jan Piekarczyk
Keyword(s):  
Remote Sensing ◽  
Precision Agriculture ◽  
Crop Production ◽  
Satellite Images ◽  
Crop Yields ◽  
Spatial Scales ◽  
Strong Relationship ◽  
Physical Parameters ◽  
Agricultural Crop ◽  
Remote Sensing Methods

AbstractWith increasing intensity of agricultural crop production increases the need to obtain information about environmental conditions in which this production takes place. Remote sensing methods, including satellite images, airborne photographs and ground-based spectral measurements can greatly simplify the monitoring of crop development and decision-making to optimize inputs on agricultural production and reduce its harmful effects on the environment. One of the earliest uses of remote sensing in agriculture is crop identification and their acreage estimation. Satellite data acquired for this purpose are necessary to ensure food security and the proper functioning of agricultural markets at national and global scales. Due to strong relationship between plant bio-physical parameters and the amount of electromagnetic radiation reflected (in certain ranges of the spectrum) from plants and then registered by sensors it is possible to predict crop yields. Other applications of remote sensing are intensively developed in the framework of so-called precision agriculture, in small spatial scales including individual fields. Data from ground-based measurements as well as from airborne or satellite images are used to develop yield and soil maps which can be used to determine the doses of irrigation and fertilization and to take decisions on the use of pesticides.

scholarly journals Terrestrial Laser Scanning for Vegetation Analyses with a Special Focus on Savannas

2021 ◽  
Vol 13 (3) ◽  
pp. 507
Author(s):  
Tasiyiwa Priscilla Muumbe ◽  
Jussi Baade ◽  
Jenia Singh ◽  
Christiane Schmullius ◽  
Christian Thau
Keyword(s):  
Remote Sensing ◽  
Vegetation Structure ◽  
Laser Scanning ◽  
Spatial Scales ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Parameter Extraction ◽  
Airborne Lidar ◽  
Special Focus ◽  
Vegetation Parameter

Savannas are heterogeneous ecosystems, composed of varied spatial combinations and proportions of woody and herbaceous vegetation. Most field-based inventory and remote sensing methods fail to account for the lower stratum vegetation (i.e., shrubs and grasses), and are thus underrepresenting the carbon storage potential of savanna ecosystems. For detailed analyses at the local scale, Terrestrial Laser Scanning (TLS) has proven to be a promising remote sensing technology over the past decade. Accordingly, several review articles already exist on the use of TLS for characterizing 3D vegetation structure. However, a gap exists on the spatial concentrations of TLS studies according to biome for accurate vegetation structure estimation. A comprehensive review was conducted through a meta-analysis of 113 relevant research articles using 18 attributes. The review covered a range of aspects, including the global distribution of TLS studies, parameters retrieved from TLS point clouds and retrieval methods. The review also examined the relationship between the TLS retrieval method and the overall accuracy in parameter extraction. To date, TLS has mainly been used to characterize vegetation in temperate, boreal/taiga and tropical forests, with only little emphasis on savannas. TLS studies in the savanna focused on the extraction of very few vegetation parameters (e.g., DBH and height) and did not consider the shrub contribution to the overall Above Ground Biomass (AGB). Future work should therefore focus on developing new and adjusting existing algorithms for vegetation parameter extraction in the savanna biome, improving predictive AGB models through 3D reconstructions of savanna trees and shrubs as well as quantifying AGB change through the application of multi-temporal TLS. The integration of data from various sources and platforms e.g., TLS with airborne LiDAR is recommended for improved vegetation parameter extraction (including AGB) at larger spatial scales. The review highlights the huge potential of TLS for accurate savanna vegetation extraction by discussing TLS opportunities, challenges and potential future research in the savanna biome.

scholarly journals Imaging Spectroscopy for Conservation Applications

2021 ◽  
Vol 13 (2) ◽  
pp. 292
Author(s):  
Megan Seeley ◽  
Gregory P. Asner
Keyword(s):  
Remote Sensing ◽  
Decision Making ◽  
Case Studies ◽  
Spatial Scales ◽  
Imaging Spectroscopy ◽  
Remote Sensing Data ◽  
Decision Makers ◽  
High Spectral Resolution ◽  
Conservation Areas ◽  
Broad Array

As humans continue to alter Earth systems, conservationists look to remote sensing to monitor, inventory, and understand ecosystems and ecosystem processes at large spatial scales. Multispectral remote sensing data are commonly integrated into conservation decision-making frameworks, yet imaging spectroscopy, or hyperspectral remote sensing, is underutilized in conservation. The high spectral resolution of imaging spectrometers captures the chemistry of Earth surfaces, whereas multispectral satellites indirectly represent such surfaces through band ratios. Here, we present case studies wherein imaging spectroscopy was used to inform and improve conservation decision-making and discuss potential future applications. These case studies include a broad array of conservation areas, including forest, dryland, and marine ecosystems, as well as urban applications and methane monitoring. Imaging spectroscopy technology is rapidly developing, especially with regard to satellite-based spectrometers. Improving on and expanding existing applications of imaging spectroscopy to conservation, developing imaging spectroscopy data products for use by other researchers and decision-makers, and pioneering novel uses of imaging spectroscopy will greatly expand the toolset for conservation decision-makers.

scholarly journals Remote sensing of underwater vegetation using single-beam acoustics

2009 ◽  
Vol 67 (3) ◽  
pp. 594-605 ◽  
Author(s):  
Victor Quintino ◽  
Rosa Freitas ◽  
Renato Mamede ◽  
Fernando Ricardo ◽  
Ana Maria Rodrigues ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Grain Size ◽  
Algal Biomass ◽  
Sediment Grain Size ◽  
Coastal System ◽  
Single Beam ◽  
Acoustic Data ◽  
Sediment Types ◽  
Caulerpa Prolifera ◽  
Sandy Sediments

Abstract Quintino, V., Freitas, R., Mamede, R., Ricardo, F., Rodrigues, A. M., Mota, J., Pérez-Ruzafa, Á., and Marcos, C. 2010. Remote sensing of underwater vegetation using single-beam acoustics. – ICES Journal of Marine Science, 67: 594–605. A single-beam, acoustic, ground-discrimination system (QTC VIEW, Series V) was used to study the distribution of underwater macrophytes in a shallow-water coastal system, employing frequencies of 50 and 200 kHz. The study was conducted in Mar Menor, SE Spain, where the expansion of Caulerpa prolifera has contributed to the silting up of the superficial sediments. A direct relationship was identified between algal biomass and sediment-fines content. Acoustic information on sediment grain size and data on algal biomass were obtained in muddy and sandy sediments, including vegetated and non-vegetated seabed. Non-vegetated muddy areas were created by diving and handpicking the algae. The multivariate acoustic data were analysed under the null hypotheses that there were no acoustic differences between bare seabeds with contrasting superficial sediment types or among low, medium, and high algal-biomass areas, having in mind that grain size can act as a confounding factor. Both null hypotheses were rejected, and the results showed that 200 kHz was better than 50 kHz in distinguishing cover levels of algal biomass. The relationship between the 200-kHz acoustic data and algal biomass suggests utility in modelling the latter using the former.

Sign in / Sign up

Export Citation Format

Share Document