scholarly journals Terrestrial Laser Scanning for Vegetation Analyses with a Special Focus on Savannas

2021 ◽  
Vol 13 (3) ◽  
pp. 507
Author(s):  
Tasiyiwa Priscilla Muumbe ◽  
Jussi Baade ◽  
Jenia Singh ◽  
Christiane Schmullius ◽  
Christian Thau
Keyword(s):  
Remote Sensing ◽  
Vegetation Structure ◽  
Laser Scanning ◽  
Spatial Scales ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Parameter Extraction ◽  
Airborne Lidar ◽  
Special Focus ◽  
Vegetation Parameter

Savannas are heterogeneous ecosystems, composed of varied spatial combinations and proportions of woody and herbaceous vegetation. Most field-based inventory and remote sensing methods fail to account for the lower stratum vegetation (i.e., shrubs and grasses), and are thus underrepresenting the carbon storage potential of savanna ecosystems. For detailed analyses at the local scale, Terrestrial Laser Scanning (TLS) has proven to be a promising remote sensing technology over the past decade. Accordingly, several review articles already exist on the use of TLS for characterizing 3D vegetation structure. However, a gap exists on the spatial concentrations of TLS studies according to biome for accurate vegetation structure estimation. A comprehensive review was conducted through a meta-analysis of 113 relevant research articles using 18 attributes. The review covered a range of aspects, including the global distribution of TLS studies, parameters retrieved from TLS point clouds and retrieval methods. The review also examined the relationship between the TLS retrieval method and the overall accuracy in parameter extraction. To date, TLS has mainly been used to characterize vegetation in temperate, boreal/taiga and tropical forests, with only little emphasis on savannas. TLS studies in the savanna focused on the extraction of very few vegetation parameters (e.g., DBH and height) and did not consider the shrub contribution to the overall Above Ground Biomass (AGB). Future work should therefore focus on developing new and adjusting existing algorithms for vegetation parameter extraction in the savanna biome, improving predictive AGB models through 3D reconstructions of savanna trees and shrubs as well as quantifying AGB change through the application of multi-temporal TLS. The integration of data from various sources and platforms e.g., TLS with airborne LiDAR is recommended for improved vegetation parameter extraction (including AGB) at larger spatial scales. The review highlights the huge potential of TLS for accurate savanna vegetation extraction by discussing TLS opportunities, challenges and potential future research in the savanna biome.

scholarly journals Leveraging TLS as a Calibration and Validation Tool for MLS and ULS Mapping of Savanna Structure and Biomass at Landscape-Scales

2021 ◽  
Vol 13 (2) ◽  
pp. 257 ◽  
Author(s):  
Shaun R. Levick ◽  
Tim Whiteside ◽  
David A. Loewensteiner ◽  
Mitchel Rudge ◽  
Renee Bartolo
Keyword(s):  
Remote Sensing ◽  
Vegetation Structure ◽  
Laser Scanning ◽  
Canopy Cover ◽  
Structural Diversity ◽  
Point Clouds ◽  
Large Area ◽  
Calibration And Validation ◽  
Savanna Vegetation ◽  
Landscape Scales

Savanna ecosystems are challenging to map and monitor as their vegetation is highly dynamic in space and time. Understanding the structural diversity and biomass distribution of savanna vegetation requires high-resolution measurements over large areas and at regular time intervals. These requirements cannot currently be met through field-based inventories nor spaceborne satellite remote sensing alone. UAV-based remote sensing offers potential as an intermediate scaling tool, providing acquisition flexibility and cost-effectiveness. Yet despite the increased availability of lightweight LiDAR payloads, the suitability of UAV-based LiDAR for mapping and monitoring savanna 3D vegetation structure is not well established. We mapped a 1 ha savanna plot with terrestrial-, mobile- and UAV-based laser scanning (TLS, MLS, and ULS), in conjunction with a traditional field-based inventory (n = 572 stems > 0.03 m). We treated the TLS dataset as the gold standard against which we evaluated the degree of complementarity and divergence of structural metrics from MLS and ULS. Sensitivity analysis showed that MLS and ULS canopy height models (CHMs) did not differ significantly from TLS-derived models at spatial resolutions greater than 2 m and 4 m respectively. Statistical comparison of the resulting point clouds showed minor over- and under-estimation of woody canopy cover by MLS and ULS, respectively. Individual stem locations and DBH measurements from the field inventory were well replicated by the TLS survey (R2 = 0.89, RMSE = 0.024 m), which estimated above-ground woody biomass to be 7% greater than field-inventory estimates (44.21 Mg ha−1 vs 41.08 Mg ha−1). Stem DBH could not be reliably estimated directly from the MLS or ULS, nor indirectly through allometric scaling with crown attributes (R2 = 0.36, RMSE = 0.075 m). MLS and ULS show strong potential for providing rapid and larger area capture of savanna vegetation structure at resolutions suitable for many ecological investigations; however, our results underscore the necessity of nesting TLS sampling within these surveys to quantify uncertainty. Complementing large area MLS and ULS surveys with TLS sampling will expand our options for the calibration and validation of multiple spaceborne LiDAR, SAR, and optical missions.

Development on Filtering Algorithms of Airborne LiDAR Point Clouds

2012 ◽  
Vol 226-228 ◽  
pp. 1892-1898
Author(s):  
Jian Qing Shi ◽  
Ting Chen Jiang ◽  
Ming Lian Jiao
Keyword(s):  
Remote Sensing ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Point Clouds ◽  
Airborne Lidar ◽  
Filtering Algorithms ◽  
Filtering Algorithm ◽  
Digital Elevation ◽  
City Model ◽  
Elevation Model

Airborne LiDAR is a new kind of surveying technology of remote sensing which developed rapidly during recent years. Raw laser scanning point clouds data include terrain points, building points, vegetation points, outlier points, etc.. In order to generate digital elevation model (DEM) and three-dimensional city model,these point clouds data must be filtered. Mathematical morphology based filtering algorithm, slope based filtering algorithm, TIN based filtering algorithm, moving surface based filtering algorithm, scanning lines based filtering algorithm and so on several representative filtering algorithms for LiDAR point clouds data have been introduced and discussed and contrasted in this paper. Based on these algorithms summarize the studying progresss about the filtering algorithm of airborne LiDAR point clouds data in home and abroad. In the end, the paper gives an expectation which will provides a reference for the following relative study.

scholarly journals Terrestrial Method for Airborne Lidar Quality Control and Assessment

2014 ◽  
Vol XL-1 ◽  
pp. 45-49 ◽  
Author(s):  
N. M. Alsubaie ◽  
H. M. Badawy ◽  
M. M. Elhabiby ◽  
N. El-Sheimy
Keyword(s):  
Quality Control ◽  
Edge Detection ◽  
Laser Scanning ◽  
A Priori ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Airborne Lidar ◽  
Data Quality Control ◽  
Detection Techniques

Most of LiDAR systems do not provide the end user with the calibration and acquisition procedures that can use to validate the quality of the data acquired by the airborne system. Therefore, this system needs data Quality Control (QC) and assessment procedures to verify the accuracy of the laser footprints and mainly at building edges. This research paper introduces an efficient method for validating the quality of the airborne LiDAR point clouds data using terrestrial laser scanning data integrated with edge detection techniques. This method will be based on detecting the edge of buildings from these two independent systems. Hence, the building edges are extracted from the airborne data using an algorithm that is based on the standard deviation of neighbour point's height from certain threshold with respect to centre points using radius threshold. The algorithm is adaptive to different point densities. The approach is combined with another innovative edge detection technique from terrestrial laser scanning point clouds that is based on the height and point density constraints. Finally, statistical analysis and assessment will be applied to compare these two systems in term of edge detection extraction precision, which will be a priori step for 3D city modelling generated from heterogeneous LiDAR systems

scholarly journals Deformation Analysis of a Composite Bridge during Proof Loading Using Point Cloud Processing

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4332 ◽  
Author(s):  
Patryk Ziolkowski ◽  
Jakub Szulwic ◽  
Mikolaj Miskiewicz
Keyword(s):  
Remote Sensing ◽  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Measurement Methods ◽  
Added Value ◽  
Translation Method ◽  
Cloud Processing ◽  
Point Cloud Processing

Remote sensing in structural diagnostics has recently been gaining attention. These techniques allow the creation of three-dimensional projections of the measured objects, and are relatively easy to use. One of the most popular branches of remote sensing is terrestrial laser scanning. Laser scanners are fast and efficient, gathering up to one million points per second. However, the weakness of terrestrial laser scanning is the troublesome processing of point clouds. Currently, many studies deal with the subject of point cloud processing in various areas, but it seems that there are not many clear procedures that we can use in practice, which indicates that point cloud processing is one of the biggest challenges of this issue. To tackle that challenge we propose a general framework for studying the structural deformations of bridges. We performed an advanced object shape analysis of a composite foot-bridge, which is subject to spatial deformations during the proof loading process. The added value of this work is the comprehensive procedure for bridge evaluation, and adaptation of the spheres translation method procedure for use in bridge engineering. The aforementioned method is accurate for the study of structural element deformation under monotonic load. The study also includes a comparative analysis between results from the spheres translation method, a total station, and a deflectometer. The results are characterized by a high degree of convergence and reveal the highly complex state of deformation more clearly than can be concluded from other measurement methods, proving that laser scanning is a good method for examining bridge structures with several competitive advantages over mainstream measurement methods.

scholarly journals A Review of Tree Species Classification Based on Airborne LiDAR Data and Applied Classifiers

2021 ◽  
Vol 13 (3) ◽  
pp. 353
Author(s):  
Maja Michałowska ◽  
Jacek Rapiński
Keyword(s):  
Remote Sensing ◽  
Tree Species ◽  
Laser Scanning ◽  
Discrimination Performance ◽  
Point Clouds ◽  
Airborne Lidar ◽  
Support Vector ◽  
Species Discrimination ◽  
Species Classification ◽  
Waveform Data

Remote sensing techniques, developed over the past four decades, have enabled large-scale forest inventory. Light Detection and Ranging (LiDAR), as an active remote sensing technology, allows for the acquisition of three-dimensional point clouds of scanned areas, as well as a range of features allowing for increased performance of object extraction and classification approaches. As many publications have shown, multiple LiDAR-derived metrics, with the assistance of classification algorithms, contribute to the high accuracy of tree species discrimination based on data obtained by laser scanning. The aim of this article is to review studies in the species classification literature which used data collected by Airborne Laser Scanning. We analyzed these studies to figure out the most efficient group of LiDAR-derived features in species discrimination. We also identified the most powerful classification algorithm, which maximizes the advantages of the derived metrics to increase species discrimination performance. We conclude that features extracted from full-waveform data lead to the highest overall accuracy. Radiometric features with height information are also promising, generating high species classification accuracies. Using random forest and support vector machine as classifiers gave the best species discrimination results in the reviewed publications.

scholarly journals Revealing Changes in the Stem Form and Volume Allocation in Diverse Boreal Forests Using Two-Date Terrestrial Laser Scanning

Forests ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 835
Author(s):  
Ville Luoma ◽  
Tuomas Yrttimaa ◽  
Ville Kankare ◽  
Ninni Saarinen ◽  
Jiri Pyörälä ◽  
...  
Keyword(s):  
Tree Growth ◽  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Stem Volume ◽  
Accurate Information ◽  
Stem Form ◽  
Monitoring Period ◽  
Significant Difference

Tree growth is a multidimensional process that is affected by several factors. There is a continuous demand for improved information on tree growth and the ecological traits controlling it. This study aims at providing new approaches to improve ecological understanding of tree growth by the means of terrestrial laser scanning (TLS). Changes in tree stem form and stem volume allocation were investigated during a five-year monitoring period. In total, a selection of attributes from 736 trees from 37 sample plots representing different forest structures were extracted from taper curves derived from two-date TLS point clouds. The results of this study showed the capability of point cloud-based methods in detecting changes in the stem form and volume allocation. In addition, the results showed a significant difference between different forest structures in how relative stem volume and logwood volume increased during the monitoring period. Along with contributing to providing more accurate information for monitoring purposes in general, the findings of this study showed the ability and many possibilities of point cloud-based method to characterize changes in living organisms in particular, which further promote the feasibility of using point clouds as an observation method also in ecological studies.

scholarly journals Measuring the Contribution of Leaves to the Structural Complexity of Urban Tree Crowns with Terrestrial Laser Scanning

2021 ◽  
Vol 13 (14) ◽  
pp. 2773
Author(s):  
Georgios Arseniou ◽  
David W. MacFarlane ◽  
Dominik Seidel
Keyword(s):  
Laser Scanning ◽  
Structural Complexity ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Urban Trees ◽  
Box Dimension ◽  
State University ◽  
Leaf Removal ◽  
Quercus Macrocarpa ◽  
Methodological Considerations

Trees have a fractal-like branching architecture that determines their structural complexity. We used terrestrial laser scanning technology to study the role of foliage in the structural complexity of urban trees. Forty-five trees of three deciduous species, Gleditsia triacanthos, Quercus macrocarpa, Metasequoia glyptostroboides, were sampled on the Michigan State University campus. We studied their structural complexity by calculating the box-dimension (Db) metric from point clouds generated for the trees using terrestrial laser scanning, during the leaf-on and -off conditions. Furthermore, we artificially defoliated the leaf-on point clouds by applying an algorithm that separates the foliage from the woody material of the trees, and then recalculated the Db metric. The Db of the leaf-on tree point clouds was significantly greater than the Db of the leaf-off point clouds across all species. Additionally, the leaf removal algorithm introduced bias to the estimation of the leaf-removed Db of the G. triacanthos and M. glyptostroboides trees. The index capturing the contribution of leaves to the structural complexity of the study trees (the ratio of the Db of the leaf-on point clouds divided by the Db of the leaf-off point clouds minus one), was negatively correlated with branch surface area and different metrics of the length of paths through the branch network of the trees, indicating that the contribution of leaves decreases as branch network complexity increases. Underestimation of the Db of the G. triacanthos trees, after the artificial leaf removal, was related to maximum branch order. These results enhance our understanding of tree structural complexity by disentangling the contribution of leaves from that of the woody structures. The study also highlighted important methodological considerations for studying tree structure, with and without leaves, from laser-derived point clouds.

scholarly journals Combined Use of Terrestrial Laser Scanning and UAV Photogrammetry in Mapping Alpine Terrain

2019 ◽  
Vol 11 (18) ◽  
pp. 2154 ◽  
Author(s):  
Ján Šašak ◽  
Michal Gallay ◽  
Ján Kaňuk ◽  
Jaroslav Hofierka ◽  
Jozef Minár
Keyword(s):  
High Resolution ◽  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Mutual Orientation ◽  
Close Range Photogrammetry ◽  
Combined Use ◽  
Wide Range ◽  
Close Range

Airborne and terrestrial laser scanning and close-range photogrammetry are frequently used for very high-resolution mapping of land surface. These techniques require a good strategy of mapping to provide full visibility of all areas otherwise the resulting data will contain areas with no data (data shadows). Especially, deglaciated rugged alpine terrain with abundant large boulders, vertical rock faces and polished roche-moutones surfaces complicated by poor accessibility for terrestrial mapping are still a challenge. In this paper, we present a novel methodological approach based on a combined use of terrestrial laser scanning (TLS) and close-range photogrammetry from an unmanned aerial vehicle (UAV) for generating a high-resolution point cloud and digital elevation model (DEM) of a complex alpine terrain. The approach is demonstrated using a small study area in the upper part of a deglaciated valley in the Tatry Mountains, Slovakia. The more accurate TLS point cloud was supplemented by the UAV point cloud in areas with insufficient TLS data coverage. The accuracy of the iterative closest point adjustment of the UAV and TLS point clouds was in the order of several centimeters but standard deviation of the mutual orientation of TLS scans was in the order of millimeters. The generated high-resolution DEM was compared to SRTM DEM, TanDEM-X and national DMR3 DEM products confirming an excellent applicability in a wide range of geomorphologic applications.

scholarly journals Deformation Monitoring of Earth Fissure Hazards Using Terrestrial Laser Scanning

Sensors ◽  
2019 ◽  
Vol 19 (6) ◽  
pp. 1463 ◽  
Author(s):  
Yunfeng Ge ◽  
Huiming Tang ◽  
Xulong Gong ◽  
Binbin Zhao ◽  
Yi Lu ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Ground Surface ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Vertical Displacement ◽  
Deformation Monitoring ◽  
Earth Fissure ◽  
Displacement Analysis ◽  
Remote Sensing Technique ◽  
Noise Data

Deformation monitoring is a powerful tool to understand the formation mechanism of earth fissure hazards, enabling the engineering and planning efforts to be more effective. To assess the evolution characteristics of the Yangshuli earth fissure hazard more completely, terrestrial laser scanning (TLS), a remote sensing technique which is regarded as one of the most promising surveying technologies in geohazard monitoring, was employed to detect the changes to ground surfaces and buildings in small- and large-scales, respectively. Time-series of high-density point clouds were collected through 5 sequential scans from 2014 to 2017 and then pre-processing was performed to filter the noise data of point clouds. A tiny deformation was observed on both the scarp and the walls, based on the local displacement analysis. The relative height differences between the two sides of the scarp increase slowly from 0.169 m to 0.178 m, while no obvious inclining (the maximum tilt reaches just to 0.0023) happens on the two walls, based on tilt measurement. Meanwhile, global displacement analysis indicates that the overall settlement slowly increases for the ground surface, but the regions in the left side of scarp are characterized by a relatively larger vertical displacement than the right. Furthermore, the comparisons of monitoring results on the same measuring line are discussed in this study and TLS monitoring results have an acceptable consistency with the global positioning system (GPS) measurements. The case study shows that the TLS technique can provide an adequate solution in deformation monitoring of earth fissure hazards, with high effectiveness and applicability.

Sign in / Sign up

Export Citation Format

Share Document