scholarly journals Finite Element Analysis of Space Science Experimental Equipment Based on HyperMesh and Nastran

2018 ◽  
Vol 198 ◽  
pp. 05010
Author(s):  
Huang Sinian ◽  
Wang Anping
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Design Process ◽  
Reference Value ◽  
Space Science ◽  
Engineering Analysis ◽  
Experimental Equipment ◽  
Element Analysis ◽  
Analysis Process ◽  
The Finite Element Analysis

In the design process of space science experimental equipment, in order to better grasp the dynamic characteristics of the structure, a large number of finite element analysis is needed. This paper comprehensively use HyperMesh and Nastran to establish a set of finite element analysis process for space science experimental equipment, combine the advantages of each software to perform finite element analysis comprehensively, which greatly improves the accuracy and efficiency of the finite element analysis, the problems of this kind of engineering analysis has certain reference value.

Interactive Graphics for the Analysis of Tires

1985 ◽  
Vol 13 (3) ◽  
pp. 127-146 ◽  
Author(s):  
R. Prabhakaran
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Approximate Solutions ◽  
Interactive Graphics ◽  
Element Analysis ◽  
Analysis Process ◽  
Physical Problems ◽  
The Finite Element Analysis ◽  
Analysis Computer ◽  
Discretization Technique

Abstract The finite element method, which is a numerical discretization technique for obtaining approximate solutions to complex physical problems, is accepted in many industries as the primary tool for structural analysis. Computer graphics is an essential ingredient of the finite element analysis process. The use of interactive graphics techniques for analysis of tires is discussed in this presentation. The features and capabilities of the program used for pre- and post-processing for finite element analysis at GenCorp are included.

A Design Process for a Foldable Container Structure Using a Finite Element Analysis

2014 ◽  
Vol 1079-1080 ◽  
pp. 348-353
Author(s):  
Sang Heon Yoon ◽  
Yang Jai Shin ◽  
Yong Shin Lee
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Design Process ◽  
Element Analysis ◽  
Iso Standard ◽  
Main Structure ◽  
The Finite Element Analysis ◽  
Standard Regulation

This study is concerned with a design process for a foldable container structure using a finite element analysis. A foldable container structure consists of frames, panels and hinge systems. The main structure of a foldable container carries all the loads while a hinge system is designed to provide its foldability. In this work, finite element structural analyses for the main foldable container structure are carried out based on the ISO standard regulation, whose results are then taken for the design of a hinge system. The finite element analysis with two types of hinge systems are also performed. It is found out that the main structure of a standard 20ft container could be used for the foldable container with the same capacity if the corner edge in the side assembly is strengthened. It is also concluded that the hinge systems proposed in this work could be successfully used in a foldable 20ft container.

Theoretical Analysis and Engineering Improvement Test Verification of the Crack Problem in the Back Van of the Vehicle

2011 ◽  
Vol 121-126 ◽  
pp. 3431-3436
Author(s):  
Guo Quan Yang ◽  
You Qun Zhao ◽  
Jun Yan Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Theoretical Analysis ◽  
Crack Problem ◽  
Engineering Application ◽  
Reference Value ◽  
Element Analysis ◽  
Crack Problems ◽  
The Finite Element Analysis ◽  
Test Verification

This paper discussed the theoretical analysis and engineering improvement test verification of the crack problem in the back van of the vehicle. Causes that may result in the crack problem are firstly analyzed and then determined by the finite element analysis. Improvement are given and proved to be effective by the test verification of an improved vehicle. The method used in this paper will contribute to the analysis and solution of the crack problems in some parts of the vehicle and has reference value in engineering application.

The Design and Finite Element Analysis for Crane Turntable Gear Based on Pro/E and ANSYS

2013 ◽  
Vol 710 ◽  
pp. 243-246
Author(s):  
Xian Hong Yang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Product Design ◽  
Optimization Design ◽  
Three Dimensional ◽  
Reference Value ◽  
Element Model ◽  
Helical Gear ◽  
Engineering Analysis ◽  
Element Analysis

The use of Pro/E and their respective advantages ANSYS software product design and engineering analysis to solve the case, first of all in the Pro/E, the completion of three-dimensional helical gear design, and then in the Pro/MECHANICA completed finite element model of helical gear, and then into ANSYS for finite element analysis of bevel gear calculation and simulation, finite element analysis of the final results of optimization design model is presented recommendations for improvement. The product design and engineering analysis method has some reference value in engineering design.

Manned Cableway Tower Operating Mode of the Finite Element Analysis

2013 ◽  
Vol 791-793 ◽  
pp. 831-834
Author(s):  
Jian Chun Gong ◽  
Deng Rong Zhou
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Operating Mode ◽  
Calculation Model ◽  
Graphical Display ◽  
Element Analysis ◽  
Analysis Process ◽  
The Finite Element Analysis ◽  
Mapping Analysis ◽  
Processing Module

Make a tower calculation model according to the requirement, this paper using i-deas software the finite element analysis on it. According to given all kinds of tower under the condition of displacement field, stress field, the analysis process of tower adopts hexahedral and tetrahedral entity processing units mapping, analysis of the results using i-deas software in the post-processing module for data processing and graphical display

Engineering Analysis and Research on Connection Plate of Vehicle Radar Antenna Pedestal

2012 ◽  
Vol 271-272 ◽  
pp. 883-886
Author(s):  
Feng Ji Chang ◽  
Yu Jun Li ◽  
Dong Yan ◽  
Hai Bo Sun ◽  
Yu Bin Wu ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Structure Characteristic ◽  
Engineering Analysis ◽  
Analysis Software ◽  
Element Analysis ◽  
Cast Aluminium ◽  
The Finite Element Analysis ◽  
Radar Antenna

According to the usage of vehicle radar antenna pedestal connection plate, this article analyzes and compares the structure characteristic of welding and casting. We decide to adopt the casting structure and use cast aluminium ZL101A. Based on the connection plate of using conditions, we analyze the deformation and stress of connection plate by the finite element analysis software. The design is in line with the material allowable requirements and to meet the requirements of the system stiffness.

The Encapsulation of Finite Element Analysis Process about Bogie’s Side Frame Based on EASA

2014 ◽  
Vol 1030-1032 ◽  
pp. 1251-1254
Author(s):  
Huan Xie ◽  
Wei Zeng
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Engineering Application ◽  
Integrated Analysis ◽  
Strength Analysis ◽  
Application Software ◽  
Engineering Analysis ◽  
Element Analysis ◽  
Analysis Process ◽  
Remote Invocation

Taking into account the problem of plenty repeated works during the operation of engineering application software, the integrated solution of engineering application software based on EASA (the encapsulate tools of software) was proposed for improving the analysis efficiency and ensuring the analysis accuracy of software purpose. Then taking the strength analysis of bogie’s side frame as an example, the integrated analysis interface of strength analysis about side frame was established, realized the remote invocation based on Web, and the efficiency of engineering analysis was improved.

The Finite Element Analysis of Tension and Compression Condition of Diesel Engine Connecting Rod

2014 ◽  
Vol 722 ◽  
pp. 120-124 ◽  
Author(s):  
Gang Chen ◽  
Lei Wu ◽  
Long Wu ◽  
Pei Qing Xie
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Diesel Engine ◽  
Reference Value ◽  
Production Cycle ◽  
Connecting Rod ◽  
Analysis Software ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Tension And Compression

In this paper, through the finite element analysis software ANSYS, analysis and research on the part drawing of the diesel engine connecting rod. Using pro/e modeling, introduce it into the finite element analysis software ANSYS for the finite element static analysis of the state of load on the connecting rod. Setting correct model, partitioning appropriate mesh, and setting a reasonable process solution, it can generate visual stress nephogram to facilitate access to important data and intuitive understanding. There is a certain reference value to guide the practical production and shorten the production cycle of the product.

Finite Element Analysis for the Working Device of Rough Terrain Forklift

2013 ◽  
Vol 397-400 ◽  
pp. 568-572
Author(s):  
Hong Feng Yan ◽  
Wei Ping Wang ◽  
Xiang Yang Qi ◽  
Hui Xian Zhang ◽  
Tian Tian ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Reference Value ◽  
Rough Terrain ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Three Dimensional Models ◽  
Working Device ◽  
Analysis Models

The paper is to study the working device of rough terrain forklift, carried out forces analysis on a typical three section telescopic boom, results indicated that the boom working in the lowest position is the most dangerous situation, Adopted the CAD software of SolidWorks to build the three dimensional models of telescopic boom, then used the FEA component of SolidWorks Simulation to carried out finite element analysis(FEA) for the working device, obtained FEA results. By the use of comparing the stress testing results with the finite element analysis results, certificated that the finite element analysis models are reasonable and the finite element method by Simulation is feasible and reliable. All of these works have very important reference value for designing and optimization of the telehandler in the future.

An Engineering Analysis and Research on Center Frame Structure Using Casting of Vehicle Radar Antenna Pedestal

2012 ◽  
Vol 224 ◽  
pp. 7-10
Author(s):  
Feng Ji Chang ◽  
Wei Na Liu ◽  
Yu Jun Li ◽  
Meng Han Wu ◽  
Yu Bin Wu ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Ductile Iron ◽  
Frame Structure ◽  
Structure Characteristic ◽  
Engineering Analysis ◽  
Analysis Software ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Radar Antenna

According to the usage of vehicle radar antenna pedestal center frame, this article analyzes and compares the structure characteristic of welding and casting. We decide to adopt the casting structure and use special casting material ductile iron QT450-10. And we describe the casting material ductile iron QT450-10. Based on the center frame of using conditions, we analyze the deformation and stress of center frame by the finite element analysis software. The design is in line with the material allowable requirements and to meet the requirements of the system stiffness.

Sign in / Sign up

Export Citation Format

Share Document