scholarly journals Two stage ejector as a pre-stage of the water ring vacuum pump

2019 ◽  
Vol 20 (7) ◽  
pp. 703
Author(s):  
Róbert Olšiak ◽  
Marek Mlkvik ◽  
František Ridzoň ◽  
Pavol Slovák

A supersonic gas ejector in conjunction with a liquid ring vacuum pump is used for creating and maintaining a vacuum in a chamber for technological purposes. In this paper, the authors submit an overview of the problematics of suction pressure reduction with a supersonic gas ejector used as a pre-stage of a liquid ring vacuum pump. This system has also the function of a cavitation protection due to the higher pressure present at the suction throat of the vacuum pump. A part of this paper is devoted to the governing equations used at the definition of the flow through an ejector. The CFD analysis of the problem was implemented with the package Fluent in 2 dimensions using the axisymmetric approach. The parts of the physical model were printed on a STRATASYS 3D printer, or were cast from technical resin. The experimental studies are then carried out in our own laboratory for validation purposes.

2018 ◽  
Vol 168 ◽  
pp. 03002 ◽  
Author(s):  
Róbert Olšiak ◽  
Zoltán Fuszko ◽  
Zoltán Csuka

A supersonic gas ejector in conjunction with a liquid ring vacuum pump is used for creating and maintaining vacuum in a chamber for technological purposes. In this paper the authors submit an overview about the problematics of suction pressure reduction with a supersonic gas ejector used as a pre-stage of a liquid ring vacuum pump. This system has also the function of a cavitation protection due to the higher pressure present at the suction throat of the vacuum pump. A part of this paper is devoted to the governing equations used at the definition of the flow through an ejector. The experimental studies are then carried out in or own laboratory for verification purposes.


Author(s):  
A. F. Najafi ◽  
M. H. Saidi ◽  
M. S. Sadeghipour ◽  
M. Souhar

In this study the developing turbulent swirling pipe flow is investigated both numerically and analytically. Governing equations are derived accompanying the boundary layer assumptions. Uniform and solid body rotation (SBR) distributions are taken into account for the axial and tangential velocities at the inlet of the pipe, respectively. Beyond the boundary layers, the flow pattern is considered to be the potential flow. Making use of the fourth-order Runge-Kutta scheme, the numerical solution of the differential equations is obtained. Further more, by simplifying the governing equations for large Rossby number, the analytical solution is performed. The results of numerical and analytical swirl intensity have been compared showing reasonable agreement. As an alternative solution, a CFD analysis has been done as well, having applied FLUENT software to support the ability of our methodology.


1998 ◽  
Vol 120 (3) ◽  
pp. 573-579 ◽  
Author(s):  
M. T. Turner ◽  
J. W. Chew ◽  
C. A. Long

In this paper, an experimental program and a CFD based mathematical model using a brush seal at two bristle to rotor clearances (0.27 mm and 0.75 mm) are presented. The experimental program examined the radial pressure distributions along the backing ring, the axial pressure distribution along the rotor, and the mass flow through the seal through a range of pressure ratios while exhausting to atmosphere. The results from this experimental program have been used to further calibrate a CFD-based model. This model treats the bristle pack as an axisymmetric, anisotropic porous region, and is calibrated by the definition of nonlinear resistance coefficients in three orthogonal directions. The CFD analysis calculates the aerodynamic forces on the bristles, which are subsequently used in a separate program to estimate the bristle movements, stresses, and bristle and rotor loads. The analysis shows that a brush seal with a build clearance produces a very different flow field within the bristle pack to one with an interference, and the need to understand the bulk movements of the bristles. These are shown to be affected by the level of friction between the bristles and the backing ring, which has an important effect on the bristles wear and seal leakage characteristics.


Author(s):  
Mike T. Turner ◽  
John W. Chew ◽  
Chris A. Long

In this paper an experimental programme and a CFD based mathematical model using a brush seal at two bristle to rotor clearances (0,27 mm. and 0,75 mm.), are presented. The experimental programme examined the radial pressure distributions along the backing ring, the axial pressure distribution along the rotor, and the mass flow through the seal, through a range of pressure ratios while exhausting to atmosphere. The results from this experimental programme have been used to further calibrate a CFD based model. This model treats the bristle pack as an axisymmetric, anisotropic porous region, and is calibrated by the definition of non-linear resistance coefficients in three orthogonal directions. The CFD analysis calculates the aerodynamic forces on the bristles, which are subsequently used in a separate program to estimate the bristle movements, stresses and bristle and rotor loads. The analysis shows that a brush seal with a build clearance produces a very different flow field within the bristle pack to one with an interference, and the need to understand the bulk movements of the bristles. These are shown to be affected by the level of friction between the bristles and the backing ring, which has an important effect on the bristles wear and seal leakage characteristics.


Author(s):  
E. M. Ratnikov ◽  
D. O. Milko

Annotation Purpose. Development of a program and methods for conducting experimental studies of the extrusion process with the definition of parameters and modes of operation of the extruder to improve its energy performance. Methods. Methods of mathematical statistics, synthesis, analysis, description and modeling were used. Results. The application of mathematical methods, in particular mathematical planning, reduces the number of experiments several times, and allows to evaluate the role of influencing factors, obtain a mathematical model of the process and determine the optimal conditions for its parameters and modes, etc. Conclusions. The methodology for experimental studies of a screw extruder is presented with the necessary equipment and methodology for processing the obtained experimental data. A mathematical method of planning, which reduces the number of experiments several times, allows us to evaluate the role of factors affecting productivity and energy intensity is presented. Keywords: extruder, auger, nutrients, research methodology, extrusion, processing, feed.


2020 ◽  
Vol 79 (Suppl 1) ◽  
pp. 1633.2-1634
Author(s):  
F. Cosan ◽  
O. M. Gedar

Background:Reactive arthritis (ReA) is defined by 1999 ACR criteria as arthritis preceding a bacterial genitourinary (GUS) or gastrointestinal (GIS) infection in 3 days-6 weeks and evidence of triggering infection. Recently, ReA is classified as SpA and patients who do not fulfill SpA criteria are classified as undifferentiated spondyloarthritis (USpA) according to ASAS/EULAR SpA classification criteria.Objectives:In several case reports which are associated with other infective agents are reported and the definition is extended for some clinicians so that SpA which is occurred after any infection is called as ReA. On the other hand, some researchers still accept the classical definition of ReA. The problem with the heterogeneity of opinions and unstandardized definition of ReA hinders studies about pathogenesis and standardization of treatments. In this study, we aimed to determine the spectrum of the use of the definition of reactive arthritis in publications in PubMed between 2009-2019.Methods:The ReA keyword is searched in PubMed for the years between 2009-2019. 248 different publications have been identified and included in this research. 89 articles, 47 reviews, 108 case reports, 2 guidelines, and 2 editorials reviewed for the definition of ReA.Results:Only 42.7% (106 patients) of these publications meet the classical definition which suggests ReA after only GIS and GUS infections. In 4 (1.6%) of the publications ReA was defined after GIS, GUS and oropharyngeal infections; in 3 (1,2%) of the publications after any bacterial infection; in 9 (3.6%) of the publications after any infection. In 8 (3.2%) of the publications, ReA and USPA was used correspondingly. In 39 (15,7%) of the publications the term agent related, ReA was used without making a general definition for ReA. 79 publications (31,9%) have not defined ReA.According to causative agent and ReA relationship, in 64 (24,6%) general infective agents, in 75 (30,2%) classical agents, in 22 (8,9%) other bacterial agents, in 23 (9,3%) streptococcus, in 10(4%) intravesical BCG, in 6 (2.4%) HIV, in 6 (2.4%) tuberculosis, in 12 (4,8%) clostrudium difficle, in 2 (0.8%) parasites were reported. In 31 (12,5%) of the publications the causative agent for the ReA was unknown, the diagnosis was made clinically.Conclusion:In this study, it is aimed to draw attention terminology intricacy and the need for the standardization of the definition of ReA and USpA. It is clear that to standardize the definition of Rea and USpA is necessary. Between 2009-2019 there are reported cases diagnosed as ReA associated with bacterial infections (especially with Clostridium difficile, streptococcus and tuberculosis infections), and viral infections (by a majority with HIV), and parasitic infections. It is not clear if we need to define them classically or define them as USPA. Another important consideration is the necessity of extended laboratory investigations to find out the real causative agent even if the patient is clinically diagnosed with ReA. The requirement of the differentiation between ReA and USpA must be revealed for therapeutic researches.References:[1]A proposal for the classification of patients for clinical and experimental studies on reactive arthritis. Pacheco-Tena C, Burgos-Vargas R, Vázquez-Mellado J, Cazarín J, Pérez-Díaz JA. J Rheumatol. 1999 Jun;26(6):1338-46.[2]The Assessment of SpondyloArthritis International Society classification criteria for peripheral spondyloarthritis and for spondyloarthritis in general. Rudwaleit M, van der Heijde D, Landewé R, Akkoc N, Brandt J, Chou CT, Dougados M, Huang F, Gu J, Kirazli Y, et al. Ann Rheum Dis. 2011;70:25–31.Disclosure of Interests:None declared


2021 ◽  
Vol 3 (4) ◽  
Author(s):  
R. Ponalagusamy ◽  
Ramakrishna Manchi

AbstractThe present communication presents a theoretical study of blood flow through a stenotic artery with a porous wall comprising Brinkman and Darcy layers. The governing equations describing the flow subjected to the boundary conditions have been solved analytically under the low Reynolds number and mild stenosis assumptions. Some special cases of the problem are also presented mathematically. The significant effects of the rheology of blood and porous wall of the artery on physiological flow quantities have been investigated. The results reveal that the wall shear stress at the stenotic throat increases dramatically for the thinner porous wall (i.e. smaller values of the Brinkman and Darcy regions) and the rate of increase is found to be 18.46% while it decreases for the thicker porous wall (i.e. higher values of the Brinkman and Darcy regions) and the rate of decrease is found to be 10.21%. Further, the streamline pattern in the stenotic region has been plotted and discussed.


Sign in / Sign up

Export Citation Format

Share Document