An in vitro Comparison of Two Replacement Techniques Utilizing Fascia Lata after Cranial Cruciate Ligament Transection in the Dog

1993 ◽  
Vol 06 (02) ◽  
pp. 85-92 ◽  
Author(s):  
G. L. Coetzee
Keyword(s):  
Femoral Condyle ◽  
Cruciate Ligament ◽  
Maximum Load ◽  
Fascia Lata ◽  
Patellar Ligament ◽  
Cross Sectional ◽  
Cranial Cruciate Ligament ◽  
Replacement Technique ◽  
Over The Top

SummaryThe immediate postoperative biomechanical properties of an “underand-over” cranial cruciate ligament (CCL) replacement technique consisting of fascia lata and the lateral onethird of the patellar ligament, were compared with that of a modified intra- and extracapsular “under-and-over-the-top” (UOTT) method. The right CCL in twelve adult dogs was dissected out and replaced with an autograft. The contralateral, intact CCL served as the control. In group A, the graft was secured to the lateral femoral condyle with a spiked washer and screw. In group B the intracapsular graft was secured to the lateral femoro-fabellar ligament, and the remainder to the patellar tendon. Both CCL replacement techniques exhibited a 2.0 ± 0.5 mm anterior drawer immediately after the operation. After skeletonization of the stifles, the length and cross-sectional area of the intact CCL and CCL substitutes were determined. Each bone-ligament unit was tested in linear tension to failure at a fixed distraction rate of 15 mm/s with the stifle in 120° flexion. Data was processed to obtain the corresponding material parameters (modulus, stress and strain in the linear loading region, and energy absorption to maximum load).The immediate postoperative structural and material properties of the “under-and-over” cranial cruciate ligament replacement technique with autogenous fascia lata, were compared to that of a modified intra- and extracapsular “under-and-over-the-top” (UOTT) method. The combined UOT T technique was slightly stronger (6%), but allowed 2.8 ± 0.9 mm more cranial tibial displacement at maximum linear force.

Arthroscopy of the normal cadaveric ovine femorotibial joint: a systematic approach to the cranial and caudal compartments

2014 ◽  
Vol 27 (05) ◽  
pp. 387-394 ◽  
Author(s):  
K. A. Mansmann ◽  
T. P. Schaer ◽  
R. B. Modesto
Keyword(s):  
Femoral Condyle ◽  
Cruciate Ligament ◽  
Common Peroneal Nerve ◽  
Patellar Ligament ◽  
Large Animal ◽  
Valgus Stress ◽  
Cranial Cruciate Ligament ◽  
Large Animal Models ◽  
Stifle Joint ◽  
Tibial Condyle

SummaryObjectives: Preclinical studies using large animal models play an intergral part in translational research. For this study, our objectives were: to develop and validate arthroscopic approaches to four compartments of the stifle joint as determined via the gross and arthroscopic anatomy of the cranial and caudal aspects of the joint.Methods: Cadaveric hindlimbs (n = 39) were harvested from mature ewes. The anatomy was examined by tissue dissection (n = 6), transverse sections (n = 4), and computed tomography (n = 4). The joint was arthroscopically explored in 25 hindlimbs.Results: A cranio-medial portal was created medial to the patellar ligament. The craniolateral portal was made medial to the extensor digitorum longus tendon. The medial femoral condyle was visible, as well as the cranial cruciate ligament, caudal cruciate ligament and both menisci with the inter-meniscal ligament. Valgus stress improved visibility of the caudal horn of the medial meniscus and tibial plateau. To explore the caudal compartments, a portal was created 1 cm proximal to the most caudal aspect of the tibial condyle. Both femoral condyles, menisci, caudal cruciate ligament, the popliteal tendon and the menisco-femoral ligament were visible. The common peroneal nerve and popliteal artery and vein are vulnerable structures to injury during arthroscopy.Clinical significance: The arthroscopic approach developed in this research is ideal to evaluate the ovine stifle joint.

Determination of Graft Forces for Cranial Cruciate Ligament Reconstruction in the Dog

1996 ◽  
Vol 09 (04) ◽  
pp. 165-171 ◽  
Author(s):  
D. A. Hulse ◽  
M. R. Slater ◽  
J. F. Hunter ◽  
W. A. Hyman ◽  
B. A. Shelley
Keyword(s):  
Degrees Of Freedom ◽  
Cruciate Ligament ◽  
Insertion Site ◽  
Graft Fixation ◽  
Flexion Angle ◽  
Patellar Ligament ◽  
Graft Material ◽  
Test Apparatus ◽  
Cranial Cruciate Ligament ◽  
Tibial Insertion

SummaryA test apparatus that allowed the stifle to move in five degrees of freedom was used to determine the effect of graft location, graft preload, and flexion angle at the time of graft fixation on the tensile graft forces experienced by a replacement graft material used to simulate reconstruction of the cranial cruciate ligament deficient stifle. Two graft locations (tibial insertion site of the patellar ligament and tibial insertion site of the cranial cruciate ligament), two graft preloads (5 N and 20 N), and three flexion angles at the time of graft fixation (15°, 30° and 90°) were examined. The tibial insertion site and preload did not have as great an effect on graft force as did the flexion angle of the limb at time of graft fixation. Graft forces were highest when reconstructions were performed with the limb in 90° of flexion (ρ <0.0001). This study supports the notion that intracapsular grafts should be fixed with the limb in a normal standing angle.A five degree of freedom test apparatus was used to evaluate the effect of graft location, graft preload, and limb flexion angle at time of graft fixation on reconstructions of the cranial cruciate ligament deficient stifle. Our results suggest that intracapsular grafts should not be fixed with the limb in 90° of flexion, but in a normal standing angle.

scholarly journals Use of the modified Insall Salvati method for determination of vertical patellar position in dogs with and without cranial cruciate ligament rupture considering the morphology of the cranio-proximal tibia

2012 ◽  
Vol 81 (4) ◽  
pp. 403-407 ◽  
Author(s):  
Dávid Kňazovický ◽  
Valent Ledecký ◽  
Marián Hluchý ◽  
Marek Ďurej
Keyword(s):  
Cruciate Ligament ◽  
Patellar Ligament ◽  
Insertion Point ◽  
Cranial Cruciate Ligament ◽  
Ligament Rupture ◽  
Cruciate Ligament Rupture ◽  
Significant Difference ◽  
Healthy Dogs ◽  
Cranial Cruciate Ligament Rupture

The aim of this study was to evaluate if the modified Insall Salvati (IS) method can be applied for the canine patient despite differences of proximal tibial morphology, and if such potential differences are also seen in dogs with cranial cruciate ligament rupture. Insall Salvati method is a simple and convenient method for determination of the vertical position of patella, by dividing the length of patella by length of the patellar ligament. The influence of the variable proximal tibial morphology on the modified (IS) index was measured and the value of modified IS index in healthy dogs (n = 25) was compared with dogs with cranial cruciate ligament rupture (n = 26). Medio-lateral radiographs of 102 stifles were evaluated. Patellar ligament length (PLL), patellar length (PL), modified IS ratio and the height of insertion point of patellar ligament on tibial tuberosity were measured. Data of the IS ratio were compared with the value of the height of the insertion point with no significant difference (P = 0.36). There was no significant difference (P = 0.07) in the PLL:PL ratio between dogs affected or unaffected with cranial cruciate ligament rupture. Based on the results of this study we can conclude that the morphology of the cranio-proximal tibia and the height of insertion point of the patellar ligament do not have an influence on the value of the modified IS index both in healthy dogs and in dogs with cranial cruciate ligament rupture.

scholarly journals Biomechanical Effects of Tibial Plateau Levelling Osteotomy on Joint Instability in Normal Canine Stifles: An In Vitro Study

2020 ◽  
Vol 33 (05) ◽  
pp. 301-307
Author(s):  
Masakazu Shimada ◽  
Tetsuya Takagi ◽  
Nobuo Kanno ◽  
Satoshi Yamakawa ◽  
Hiromichi Fujie ◽  
...  
Keyword(s):  
Joint Instability ◽  
Tibial Plateau ◽  
Cruciate Ligament ◽  
Biomechanical Testing ◽  
In Vitro Study ◽  
Axial Rotation ◽  
Testing System ◽  
Compression Tests ◽  
Cranial Cruciate Ligament

Abstract Objective The aim of the study was to determine the changes in biomechanical characteristics following tibial plateau levelling osteotomy (TPLO) using simulated manual tests. Study Design Twenty-one stifles from healthy Beagle dogs that had undergone TPLO or had not (control) were first tested in the intact form, and then the cranial cruciate ligament (CrCL) was transected in each to provide four test situations: control-intact, control-CrCL-transected, TPLO-intact and TPLO-CrCL-transected. The stifles were then analysed using a robotic joint biomechanical testing system. The craniocaudal drawer, axial rotation and proximal compression tests were applied. Results The craniocaudal displacement during the drawer test was not significantly different between the control-intact and TPLO-intact. However, the displacement was significantly greater in the TPLO-CrCL-transected than in the control-intact. In the axial rotation test, the internal–external (IE) rotation was significantly greater in the TPLO-intact than in the control-intact. Similarly, the IE rotation was significantly greater in the TPLO-CrCL-transected than in the control-CrCL-transected. In the proximal compression test, craniocaudal displacement was not significantly different among the control-intact, TPLO-intact and TPLO-CrCL-transected. Conclusion These findings suggest that TPLO influences the tension of the collateral ligaments and might generate laxity of the tibiofemoral joint. Instability after the osteotomy might be associated with the progression of osteoarthritis.

Modelling the Effects of Cranial Cruciate Ligament Transection, Medial Meniscal Release and Triple Tibial Osteotomy on Stability of the Canine Stifle Joint

2020 ◽  
Vol 33 (03) ◽  
pp. 174-182
Author(s):  
Tanja V. Jensen ◽  
Signe S. Kristiansen ◽  
Lene E. Buelund ◽  
James E. Miles
Keyword(s):  
Ex Vivo ◽  
Cruciate Ligament ◽  
Patellar Ligament ◽  
Tibial Osteotomy ◽  
Joint Angles ◽  
Cranial Cruciate Ligament ◽  
Stifle Joint ◽  
Wide Range ◽  
Loading Ratio ◽  
Canine Stifle

Abstract Objective The aim of this study was to evaluate the ex vivo effects of sequential cranial cruciate ligament transection (CCLx), medial meniscal release (MMR) and triple tibial osteotomy (TTO) on canine stifle stability compared with the intact state, across a wide range of joint angles. Study Design Nine right hind limb preparations were instrumented to provide constant quadriceps and gastrocnemius loads in a 3:1 ratio, and extended from full flexion during fluoroscopic recording. Recordings were repeated after each of CCLx, MMR and TTO. Fluoroscopic landmarks were used to calculate tibial subluxation and patellar ligament angle. Results Medial meniscal release resulted in additional cranial tibial subluxation compared with CCLx. Triple tibial osteotomy restored stifle stability up to a joint angle of 125 degrees. The presence of the crossover angle could be inferred from the patellar ligament angle and subluxation curves. Conclusion Our results suggest that in the cranial cruciate ligament-deficient stifle, the crossover angle at which loading shifts between the caudal and cranial cruciate ligaments is dependent on both loading and integrity of the medial meniscus. Triple tibial osteotomy improves stifle stability over a wide range of joint angles under a quadricep to gastrocnemius loading ratio of 3:1 by converting cranial tibial thrust to caudal tibial thrust, due to TTO increasing the amount of joint extension required to reach the crossover angle.

scholarly journals Radiographic assessment of the proximal tibial angles in dogs and cats with and without cranial cruciate ligament rupture

2018 ◽  
Vol 38 (6) ◽  
pp. 1190-1195 ◽  
Author(s):  
Ana Flávia D.P. Arruda ◽  
Leonardo A.L. Muzzi ◽  
Antonio C.C. Lacreta Junior ◽  
Ruthnéa A.L. Muzzi ◽  
Gabriela R. Sampaio ◽  
...  
Keyword(s):  
Tibial Plateau ◽  
Cruciate Ligament ◽  
Patellar Ligament ◽  
Common Tangent ◽  
Cranial Cruciate Ligament ◽  
Mean Values ◽  
Stifle Joint ◽  
Significant Difference ◽  
Tangent Method ◽  
Healthy Dogs

ABSTRACT: The influence of the proximal tibial angles in the cranial cruciate ligament (CCL) rupture in dogs is still controversial, and little is known regarding this topic in cats. The aim of this study was to evaluate and compare the angles of the proximal portion of the tibia in dogs and cats with and without CCL rupture. Retrospective and prospective radiographs of the stifle joints were obtained and divided into four groups. Group 1 was composed of 70 stifle joint images of dogs without orthopedic disorders (healthy dogs), group 2 had 70 stifle joint images of dogs with CCL rupture, group 3 had 50 stifle joint images of cats without orthopedic disorders (healthy cats) and group 4 had 25 stifle joint images of cats with CCL rupture. Radiographs were taken with the stifle joint in the mediolateral projection, positioned at the angle of hind limb support. Between the two groups of dogs evaluated, the dogs with CCL rupture had statistically greater tibial plateau angle (TPA) compared with healthy dogs. No difference was shown in relation to the TPA between healthy cats and cats with CCL rupture. In relation to the patellar ligament angle by tibial plateau method the values for the healthy dogs were significantly higher than those for the CCL ruptured dogs. Similarly, healthy cats had significantly higher mean values than cats with CCL rupture. In the patellar ligament angle by common tangent method there was no significantly difference between the two groups of dogs. Between the two groups of cats, animals with CCL rupture had statistically higher mean values than healthy cats. In general, the groups of dogs showed higher mean values than the groups of cats. For the patellar ligament insertion angle (PLIA) healthy dogs showed a significantly higher mean than dogs with CCL rupture. There was no significant difference between the groups of cats. In conclusion, the TPA and the PLIA possibly influence the etiology of CCL rupture in dogs but not in cats. The low patellar ligament angle measured by common tangent method may favorably influence the reduced incidence of CCL rupture in cats.

Angle between the patellar ligament and tibial plateau in dogs with partial rupture of the cranial cruciate ligament

2006 ◽  
Vol 67 (11) ◽  
pp. 1855-1860 ◽  
Author(s):  
Christian S. Schwandt ◽  
Alejandra Bohorquez-Vanelli ◽  
Slobodan Tepic ◽  
Michael Hassig ◽  
Renate Dennler ◽  
...  
Keyword(s):  
Tibial Plateau ◽  
Cruciate Ligament ◽  
Patellar Ligament ◽  
Partial Rupture ◽  
Cranial Cruciate Ligament

In vitro evaluation of the relationship between the semitendinosus muscle and cranial cruciate ligament in canine cadavers

2012 ◽  
Vol 73 (5) ◽  
pp. 672-680 ◽  
Author(s):  
Nobuo Kanno ◽  
Hirokazu Amimoto ◽  
Yasushi Hara ◽  
Yasuji Harada ◽  
Yoshinori Nezu ◽  
...  
Keyword(s):  
Cruciate Ligament ◽  
Semitendinosus Muscle ◽  
Cranial Cruciate Ligament ◽  
In Vitro Evaluation ◽  
The Relationship

DEVELOPMENT OF A CANINE STIFLE COMPUTER MODEL TO EVALUATE CRANIAL CRUCIATE LIGAMENT DEFICIENCY

2013 ◽  
Vol 13 (02) ◽  
pp. 1350043 ◽  
Author(s):  
NATHAN P. BROWN ◽  
GINA E. BERTOCCI ◽  
DENIS J. MARCELLIN-LITTLE
Keyword(s):  
Computer Model ◽  
Cruciate Ligament ◽  
Contact Forces ◽  
Model Verification ◽  
Tibial Rotation ◽  
Cranial Cruciate Ligament ◽  
Load Bearing ◽  
Tibial Translation

The objective of this study was to develop a three-dimensional (3D) quasi-static rigid body canine pelvic limb computer model simulating a cranial cruciate ligament (CrCL) intact and CrCL-deficient stifle during walking stance to describe stifle biomechanics. The model was based on a five-year-old neutered male Golden Retriever (33 kg) with no orthopedic or neurologic disease. Skeletal geometry and ligament anatomy determined from computed tomography (CT), optimized muscle forces, motion capture kinematics, and force platform ground reaction forces were used to develop the model. Ligament loads, tibial translation, tibial rotation, and femoromeniscal contact forces were compared across the intact and CrCL-deficient stifle. The CrCL was found to be the primary intact stifle load-bearing ligament, and the caudal cruciate ligament was the primary CrCL-deficient stifle load-bearing ligament. Normalized tibial translation and rotation were 0.61 mm/kg and 0.14 degrees/kg, respectively. Our model confirmed that the CrCL stabilizes the intact stifle and limits tibial translation and rotation. Model verification was confirmed through agreement with experimentally measured kinematics and previous in vivo, in vitro, and mathematical model studies. Parametric analysis indicated outcome measure sensitivity to ligament pre-strain. Computer modeling could be useful to further investigate stifle biomechanics associated with surgical stabilization techniques.

Sign in / Sign up

Export Citation Format

Share Document