General Thermal Conductivity Function for Unsaturated Soils Considering Effects of Water Content, Temperature, and Confining Pressure

2021 ◽  
Vol 147 (11) ◽  
pp. 04021123
Author(s):  
Toan Duc Cao ◽  
Sannith Kumar Thota ◽  
Farshid Vahedifard ◽  
Amin Amirlatifi
Keyword(s):  
Thermal Conductivity ◽  
Water Content ◽  
Unsaturated Soils ◽  
Confining Pressure ◽  
Conductivity Function

Basic Study on Effects of Water Content on Printing Paper on Equivalent Thermal Conductivity

2018 ◽  
Vol 2018 (1) ◽  
pp. 41-43
Author(s):  
Takashi Fukue ◽  
Hirotoshi Terao ◽  
Koichi Hirose ◽  
Tomoko Wauke ◽  
Hisashi Hoshino ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Water Content ◽  
Basic Study ◽  
Equivalent Thermal Conductivity ◽  
Printing Paper

Study on mechanical properties and damage evolution of carbonaceous shale under triaxial compression with acoustic emission

2021 ◽  
pp. 105678952199119
Author(s):  
Kai Yang ◽  
Qixiang Yan ◽  
Chuan Zhang ◽  
Wang Wu ◽  
Fei Wan
Keyword(s):  
Mechanical Properties ◽  
Acoustic Emission ◽  
Water Content ◽  
Damage Evolution ◽  
Damage Assessment ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Damage Variable ◽  
Natural State ◽  
Carbonaceous Shale

To explore the mechanical properties and damage evolution characteristics of carbonaceous shale with different confining pressures and water-bearing conditions, triaxial compression tests accompanied by simultaneous acoustic emission (AE) monitoring were conducted on carbonaceous shale rock specimens. The AE characteristics of carbonaceous shale were investigated, a damage assessment method based on Shannon entropy of AE was further proposed. The results suggest that the mechanical properties of carbonaceous shale intensify with increasing confining pressure and degrade with increasing water content. Moisture in rocks does not only weaken the cohesion but also reduce the internal friction angle of carbonaceous shale. It is observed that AE activities mainly occur in the post-peak stage and the strong AE activities of saturated carbonaceous shale specimens appear at a lower normalized stress level than that of natural-state specimens. The maximum AE counts and AE energy increase with water content while decrease with confining pressure. Both confining pressure and water content induce changes in the proportions of AE dominant frequency bands, but the changes caused by confining pressure are more significant than those caused by water content. The results also indicate that AE entropy can serve as an applicable index for rock damage assessment. The damage evolution process of carbonaceous shale can be divided into two main stages, including the stable damage development stage and the damage acceleration stage. The damage variable increases slowly accompanied by a few AE activities at the first stage, which is followed by a rapid growth along with intense acoustic emission activities at the damage acceleration stage. Moreover, there is a sharp rise in the damage evolution curve for the natural-state specimen at the damage acceleration stage, while the damage variable develops slowly for the saturated-state specimen.

scholarly journals An Improved Mechanistic-Empirical Creep Model for Unsaturated Soft and Stabilized Soils

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4146
Author(s):  
Xunli Jiang ◽  
Zhiyi Huang ◽  
Xue Luo
Keyword(s):  
Water Content ◽  
Unsaturated Soils ◽  
Simulation Analysis ◽  
Soft Soil ◽  
Creep Model ◽  
Subgrade Soils ◽  
Stabilized Soil ◽  
Deformation Behaviors ◽  
Creep Models ◽  
Moisture Conditions

Soft soils are usually treated to mitigate their engineering problems, such as excessive deformation, and stabilization is one of most popular treatments. Although there are many creep models to characterize the deformation behaviors of soil, there still exist demands for a balance between model accuracy and practical application. Therefore, this paper aims at developing a Mechanistic-Empirical creep model (MEC) for unsaturated soft and stabilized soils. The model considers the stress dependence and incorporates moisture sensitivity using matric suction and shear strength parameters. This formulation is intended to predict the soil creep deformation under arbitrary water content and arbitrary stress conditions. The results show that the MEC model is in good agreement with the experimental data with very high R-squared values. In addition, the model is compared with the other classical creep models for unsaturated soils. While the classical creep models require a different set of parameters when the water content is changed, the MEC model only needs one set of parameters for different stress levels and moisture conditions, which provides significant facilitation for implementation. Finally, a finite element simulation analysis of subgrade soil foundation is performed for different loading levels and moisture conditions. The MEC model is utilized to predict the creep behavior of subgrade soils. Under the same load and moisture level, the deformation of soft soil is largest, followed by lime soil and RHA–lime-stabilized soil, respectively.

Water-content dependence of the thermal conductivity for a phenolic foam plastic composite

1987 ◽  
Vol 30 (5) ◽  
pp. 464-465 ◽  
Author(s):  
A. P. Shamaeva ◽  
D. N. Tolstyakov ◽  
F. G. Fedorova
Keyword(s):  
Thermal Conductivity ◽  
Water Content ◽  
Foam Plastic ◽  
Plastic Composite ◽  
Phenolic Foam

Modeling Surface Temperatures for Snow-Covered Roads: A Case Study for a Heated Pavement in Bærum, Norway

2018 ◽  
Vol 2672 (12) ◽  
pp. 220-231
Author(s):  
Anne D. W. Nuijten ◽  
Inge Hoff ◽  
Knut V. Høyland
Keyword(s):  
Thermal Conductivity ◽  
Water Content ◽  
Liquid Water ◽  
Surface Condition ◽  
Winter Season ◽  
High Water ◽  
Liquid Water Content ◽  
High Water Content ◽  
Snow Layer ◽  
Snow Samples

Heated pavements are used as an alternative to removing snow and ice mechanically and chemically. Usually a heated pavement system is automatically switched on when snowfall starts or when there is a risk of ice formation. Ideally, these systems run based on accurate predictions of surface conditions a couple of hours ahead of time, for which both weather forecasts and reliable surface temperature predictions are needed. The effective thermal conductivity of the snow layer is often described as a function of its density. However the thermal conductivity of a snow layer can vary considerably, not only for snow samples with a different density, but also for snow samples with the same density, but with a variation in the liquid water content. In this paper a physical temperature and surface condition model is described for snow-covered roads. The model is validated for an entire winter season on a heated pavement in Norway. Two different models to describe the thermal conductivity through the snow layer were compared. Results show that the thermal conductivity of the snow layer can be best described as a function of the density for snow with a low liquid water content. For snow with a high water content, the thermal conductivity can be best described as a function of the volume fractions and thermal conductivity of ice, water, and air, in which air and ice are modeled as a series system and water and air/ice in parallel.

scholarly journals Thermal Conductivity of Compacted GO-GMZ Bentonite Used as Buffer Material for a High-Level Radioactive Waste Repository

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Yong-Gui Chen ◽  
Xue-Min Liu ◽  
Xiang Mu ◽  
Wei-Min Ye ◽  
Yu-Jun Cui ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Radioactive Waste ◽  
Water Content ◽  
Radioactive Waste Disposal ◽  
Dry Density ◽  
Gmz Bentonite ◽  
High Level Radioactive Waste ◽  
Buffer Material ◽  
High Level ◽  
Crucial Parameter

In China, Gaomiaozi (GMZ) bentonite serves as a feasible buffer material in the high-level radioactive waste (HLW) repository, while its thermal conductivity is seen as a crucial parameter for the safety running of the HLW disposal. Due to the tremendous amount of heat released by such waste, the thermal conductivity of the buffer material is a crucial parameter for the safety running of the high-level radioactive waste disposal. For the purpose of improving its thermal conductivity, this research used the graphene oxide (GO) to modify the pure bentonite and then the nanocarbon-based bentonite (GO-GMZ) was obtained chemically. The thermal conductivity of this modified soil has been measured and investigated under various conditions in this study: the GO content, dry density, and water content. Researches confirm that the thermal conductivity of the modified bentonite is codetermined by the three conditions mentioned above, namely, the value of GO content, dry density, and water content. Besides, the study proposes an improved geometric mean model based on the special condition to predict the thermal conductivity of the compacted specimen; moreover, the calculated values are also compared with the experimental data.

Sign in / Sign up

Export Citation Format

Share Document