Case Study: Scaling Recharge Rates from Pilot Projects of Managed Artificial Aquifer Recharge in the Walla Walla Basin, Oregon

2015 ◽  
Vol 20 (8) ◽  
pp. 05014028 ◽  
Author(s):  
A. C. Petrides ◽  
R. Stewart ◽  
R. Bower ◽  
R. H. Cuenca ◽  
Brian Wolcott
Keyword(s):  
Aquifer Recharge ◽  
Pilot Projects ◽  
Recharge Rates ◽  
Artificial Aquifer Recharge ◽  
Walla Walla

Potential impacts of slum urbanisation on channel bank storage in the Bang Pakong River, Thailand

2012 ◽  
Vol 7 (4) ◽  
Author(s):  
K. Harriden
Keyword(s):  
Water Quality ◽  
Balance Equations ◽  
Physical Processes ◽  
Social Phenomena ◽  
Urban Settlements ◽  
Recharge Rates ◽  
Water Quality Deterioration ◽  
Informal Urban Settlements ◽  
Storage Processes

Generally regarded as social phenomena, this paper regards slum urbanisation as an environmental actor. Specifically, how slum developments modify hydrogeomorphological processes motivates this research. Using the Bang Pakong River, eastern Thailand, as a case study, a literature review was conducted. The literature reviewed indicated changes in physical processes such as channel bank stability, water quality, flow regimes and the hydrological balance equations can occur with slum development. Given the importance of channel banks as the physical basis of many slum sites, this paper focuses on the possible changes to channel bank storage in the Bang Pakong River following slum urbanisation. The research highlights possible changes to channel bank storage processes, notably decreased storage recharge rates; increased anthropogenic extraction; and probable water quality deterioration. Deeper scientific understanding of how river processes are affected by specific forms of urban development can contribute to better management of both informal urban settlements and rivers.

scholarly journals The Key Strategies to Implement Circular Economy in Building Projects—A Case Study of Taiwan

2021 ◽  
Vol 13 (2) ◽  
pp. 754
Author(s):  
H.-Ping Tserng ◽  
Cheng-Mo Chou ◽  
Yun-Tsui Chang
Keyword(s):  
Case Studies ◽  
Circular Economy ◽  
Building Industry ◽  
Structured Interviews ◽  
Pilot Projects ◽  
Building Projects ◽  
The World ◽  
Project Phases ◽  
Future Project

The building industry is blamed for consuming enormous natural resources and creating massive solid waste worldwide. In response to this, the concept of circular economy (CE) has gained much attention in the sector in recent years. Many pilot building projects that implemented CE concepts started to appear around the world, including Taiwan. However, compared with the pilot projects in the Netherlands, which are regarded as the pioneer ones by international society, many CE-related practices are not implemented in pilot cases in Taiwan. To assist future project stakeholders to recognize what the key CE-related practices are and how they could be implemented in their building projects in Taiwan, this study has conducted a series of case studies of Dutch and Taiwanese pilot projects and semi-structured interviews with key project stakeholders of Taiwanese pilot projects. Thirty key CE-related practices are identified via case studies, along with their related 5R principles (Rethink, Reduce, Reuse, Repair, Recycle) and project phases. Suggestion on CE-related practices, their 5R principles, project items, and phases to implement in building projects in Taiwan is also proposed while discussion on differences between two countries’ pilot projects is presented.

scholarly journals THE FRAMEWORK OF URBAN PILOT PROJECTS AND CASE STUDY : From survey of BOM project in Antwerp

2005 ◽  
Vol 70 (590) ◽  
pp. 95-102
Author(s):  
Yumi FUKUHARA ◽  
Yoshimitsu SHIOZAKI ◽  
Yumiko HORITA
Keyword(s):  
Pilot Projects

Quantifying Mountain Aquifer Recharge Rates Using Storage-Discharge Functions in the Sierra Nevada, California 

2021 ◽  
Author(s):  
Hoori Ajami ◽  
Adam Schreiner-McGraw
Keyword(s):  
Sierra Nevada ◽  
High Elevation ◽  
Rain Event ◽  
Aquifer Recharge ◽  
Mountain System ◽  
Mountain Front ◽  
Streamflow Data ◽  
Recession Analysis ◽  
Recharge Rates ◽  
Main Components

<p>Mountain System Recharge (MSR) is one of the main components of recharge in many arid and semi-arid aquifers, yet the mechanisms of MSR in high-elevation mountain ranges are poorly understood. The complexity of recharge processes and the lack of groundwater observations in mountain catchments contribute to this problem. MSR consists of two distinct pathways: 1) mountain bedrock aquifer recharge (MAR) consists of snowmelt or rainfall derived infiltration into the mountain bedrock, which either discharges to streams as baseflow or reaches an alluvial aquifer in an adjacent valley via lateral subsurface flow referred to as mountain block recharge (MBR), and 2) Mountain front recharge (MFR) consists of streamflow infiltration at the mountain front. Here, we apply streamflow recession analysis across 11 anthropogenically unaffected catchments in the Sierra Nevada to derive seasonally distinct storage-discharge functions and quantify MAR in response to changes in precipitation. Median annual recharge efficiencies (ratio of annual MAR to precipitation) range from 4 to 28% and can reach up to 60% during the wettest years on record. We implement a global sensitivity analysis to identify parameters that significantly impact MAR rates. Results illustrate that MAR estimates are mostly sensitive to the filter parameters for streamflow data selection used during the recession analysis, and the number of dry days after a rain event where streamflow data are excluded has the greatest impact. Our results demonstrate that storage-discharge functions are useful for quantifying groundwater recharge in mountainous catchments under perennial flow conditions. However, estimated MAR rates are impacted by the uncertainty in streamflow data, filtering of streamflow time series and model structure. Future work will be focused on quantifying uncertainty in MAR estimates caused from various sources.</p><p> </p>

Mathematical-Modelling Simulation Applied to Help in the Decision-Making Process on Environmental Impact Assessment of Agriculture

2011 ◽  
pp. 199-233
Author(s):  
Maria Pessoa ◽  
Elizabeth Fernandes ◽  
Sonia Nascimento de Queiroz ◽  
Vera Ferracini ◽  
Marco Gomes ◽  
...  
Keyword(s):  
Decision Making ◽  
Environmental Impact ◽  
Mathematical Modelling ◽  
Impact Assessment ◽  
Environmental Impact Assessment ◽  
Production Systems ◽  
Decision Making Process ◽  
Aquifer Recharge ◽  
Guarani Aquifer

The present chapter provides a brief explanation on some aspects involved in the development of models and mathematical-modelling simulations, to show their benefits to the decision-making process in the environmental impact assessment of agriculture. Aspects concerning the agroecosystems were also presented toward the sustainability of Brazilian agricultural production systems. Some applications which have been developed in Brazil were pointed out, as well as a specific case study conducted at the Guarani aquifer recharge area located in Ribeirão Preto, São Paulo state, in order to show the influence of input data on the results provided by CMLS94 simulator.

scholarly journals From Invention Disclosures to Innovation - Challenges in Transforming Practice

2019 ◽  
Vol 1 (1) ◽  
pp. 139-148
Author(s):  
Senni Kirjavainen ◽  
Tua A. Björklund
Keyword(s):  
Product Development ◽  
Design Thinking ◽  
Current Practice ◽  
Collaborative Culture ◽  
Pilot Projects ◽  
New Ways Of Working ◽  
Incremental Development ◽  
Change Efforts

AbstractAdopting design thinking and innovation-oriented approaches in organizations is crucial but not always simple. New practices of collaboration, user-orientedness and exploration require a compatible culture to be successfully integrated into product development. This paper presents a case study based on 12 interviews of employees and managers in a large Finland-based technology company, introducing new ways of working to product development. Silos, focusing on inventions, and a lack of resources for exploration were highlighted as key challenges in transitioning from incremental development to innovations. Perhaps counterintuitively, introducing new ways of working requiring a collaborative culture - the most widely recognized shortcoming in the current practice in the case - were best received, and support and feedback could be found for pilot projects in these arenas. When the gap between the practice and culture was smaller, change efforts could perhaps be more challenging, as there was less of a consensus on a need to change. The results suggest than developers need not automatically shy away from piloting new ways of working even when existing cultures are not compatible.

Sign in / Sign up

Export Citation Format

Share Document