Utilization of Steel Slag Powder as a Combined Admixture with Ground Granulated Blast-Furnace Slag in Cement Based Materials

2013 ◽  
Vol 25 (12) ◽  
pp. 1990-1993 ◽  
Author(s):  
Xiaolu Guo ◽  
Huisheng Shi
Keyword(s):  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Steel Slag ◽  
Slag Powder ◽  
Granulated Blast Furnace Slag ◽  
Steel Slag Powder ◽  
Cement Based Materials ◽  
Furnace Slag

Workability and Mechanical Properties of Concret with Different Admixtures

2013 ◽  
Vol 325-326 ◽  
pp. 67-70
Author(s):  
Yun Feng Li ◽  
Mi Xue Han ◽  
Li Xu
Keyword(s):  
Mechanical Properties ◽  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Steel Slag ◽  
Mineral Admixtures ◽  
Slag Powder ◽  
Steel Slag Powder ◽  
Furnace Slag

The mineral admixtures mixed into concrete have important effects on concrete performance. The workability and mechanical properties of the concrete are studied with different dosages of admixtures, such as steel slag powder, blast furnace slag powder and fly ash. The results show that fly ash has more advantages in improving the performance of the concrete. When steel slag powder, blast furnace slag powder and fly ash, respectively, replace the amount of cement to 30%, 30%, 20%, the mechanical properties of the concrete are improved significantly.

Researcher Progress of Steel Slag Cascade Utilization in Building Materials

2014 ◽  
Vol 629-630 ◽  
pp. 293-298 ◽  
Author(s):  
Gang Meng ◽  
Kai Feng Zhang ◽  
Shi Ran Zhao ◽  
Meng Xue Ouyang ◽  
Xiang Li
Keyword(s):  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Building Materials ◽  
Steel Slag ◽  
Test Methods ◽  
Fine Aggregate ◽  
Volume Stability ◽  
Slag Powder ◽  
Steel Slag Powder ◽  
Furnace Slag

This paper studied the cascade use of industrial waste slag as the cementitious material, the fine aggregate and the coarse aggregate, assisted by XRD, SEM and other microscopic test methods. The results that the system had the best volume stability when the steel slag addition of 40%. When the cement mortar prepared by 10% steel slag fine aggregate, and mixed with 20% steel slag powder and 20% blast furnace slag powder, the mortar construction performance and shrink resistant performance is excellent. On the basis of concrete double mixing 25% steel slag aggregate and 30% steel slag powder, compound mixing 20% blast furnace slag powder, the durable properties of concrete are also excellent.

scholarly journals Synergistic Excitation Mechanism of CaO-SiO2-Al2O3-SO3 Quaternary Active Cementitious System

2021 ◽  
Vol 8 ◽  
Author(s):  
Fusheng Niu ◽  
Yukun An ◽  
Jinxia Zhang ◽  
Wen Chen ◽  
Shengtao He
Keyword(s):  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Steel Slag ◽  
Cementitious Materials ◽  
Test Block ◽  
Hydration Reaction ◽  
Alkaline Environment ◽  
Granulated Blast Furnace Slag ◽  
Cementitious System ◽  
Furnace Slag

In this study, the influence of steel slag (SS) content on the strength of the cementitious materials was investigated. The quaternary active cementitious material (CaO-SiO2-Al2O3-SO3) was prepared using various proportions of steel slag (SS), granulated blast furnace slag (BFS), and desulfurized gypsum (DG). The mechanism of synergistic excitation hydration of the cementitious materials was examined using various techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectrometry (FTIR). The strength of the mortar test block was initially increased and decreased later with the increase of the SS content. Mortar test block with 20% steel slag, 65% granulated blast furnace slag, and 15% desulfurized gypsum with 0.35 water-binder ratio showed the highest compressive strength of 57.3 MPa on 28 days. The free calcium oxide (f-CaO) in the SS reacted with water and produced calcium hydroxide (Ca(OH)2) which created an alkaline environment. Under the alkaline environment, the alkali-activated reaction occurred with BFS. In the early stage of hydration reaction, calcium silicate hydrate (C-S-H) gel and fibrous hydration product ettringite (AFt) crystals were formed, which provided early strength to the cementitious materials. As the hydration reaction progressed, the interlocked growth of C-S-H gel and AFt crystals continued and promoted the increase of the strength of the cementitious system.

Study on Sulfate Resistance of Concrete with Compound Mineral Admixture

2011 ◽  
Vol 99-100 ◽  
pp. 420-425 ◽  
Author(s):  
Qian Rong Yang ◽  
Xiao Qian Wang ◽  
Hui Ji
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Steel Slag ◽  
Sulfate Attack ◽  
Mineral Admixture ◽  
Sulfate Resistance ◽  
Chemical Attack ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

The strength, expansion and amount of scaling of concrete with compound mineral admixture (CMA) from steel slag, granulated blast furnace slag and fly ash were studied. The result shows that damage by crystallization press from sulfate attack when concrete was exposed to sulfate environments under wetting–drying alternation is much larger than that from sulfate chemical attack. Adding CMA to concrete could reduce the damage from expansion of concrete caused by sulfate chemical attack, but the resistance of concrete to damage by crystallization press from sulfate attack was remarkably reduced.

Comparison of Selected Properties of Portland Cement Based Materials and Alkali Activated Materials Based on Granulated Blast Furnace Slag

2016 ◽  
Vol 865 ◽  
pp. 107-113 ◽  
Author(s):  
Pavel Mec ◽  
Jana Boháčová ◽  
Josef Koňařík
Keyword(s):  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Water Glass ◽  
Sodium Metasilicate ◽  
Alkali Activation ◽  
Granulated Blast Furnace Slag ◽  
Cement Based Materials ◽  
One Year ◽  
Furnace Slag ◽  
Alkali Activated

Alkali activated systems are materials formed by alkali-activation of latent hydraulic or pozzolanic materials. The outcome is a polymeric structure with properties comparable to materials based on cement.The principle of the experiment is to compare selected properties of alkali-activated materials based on blast furnace slag and using various types of activator (sodium water glass, potassium water glass, DESIL AL and sodium metasilicate) to binders based on white and Portland cements of the highest quality. The samples were left for one year in environments simulating the conditions in the interior and exterior. Selected physical-mechanical properties were evaluated and compared.

scholarly journals Characterization of Supplementary Cementitious Materials and Fibers to Be Implemented in High Temperature Concretes for Thermal Energy Storage (TES) Application

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 5190
Author(s):  
Laura Boquera ◽  
David Pons ◽  
Ana Inés Fernández ◽  
Luisa F. Cabeza
Keyword(s):  
Tensile Strength ◽  
Blast Furnace ◽  
High Temperature ◽  
Blast Furnace Slag ◽  
Steel Slag ◽  
Cementitious Materials ◽  
Iron Silicate ◽  
Supplementary Cementitious Materials ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

Six supplementary cementitious materials (SCMs) were identified to be incorporated in concrete exposed to high-temperature cycling conditions within the thermal energy storage literature. The selected SCMs are bauxite, chamotte, ground granulated blast furnace slag, iron silicate, silica fume, and steel slag. A microstructural characterization was carried out through an optical microscope, X-ray diffraction analysis, and FT-IR. Also, a pozzolanic test was performed to study the reaction of SCMs silico-aluminous components. The formation of calcium silica hydrate was observed in all SCMs pozzolanic test. Steel slag, iron silicate, and ground granulated blast furnace slag required further milling to enhance cement reaction. Moreover, the tensile strength of three fibers (polypropylene, steel, and glass fibers) was tested after exposure to an alkalinity environment at ambient temperature during one and three months. Results show an alkaline environment entails a tensile strength decrease in polypropylene and steel fibers, leading to corrosion in the later ones.

Sign in / Sign up

Export Citation Format

Share Document