steel slag powder
Recently Published Documents


TOTAL DOCUMENTS

81
(FIVE YEARS 30)

H-INDEX

9
(FIVE YEARS 4)

Structures ◽  
2021 ◽  
Vol 33 ◽  
pp. 2811-2823
Author(s):  
Md Jihad Miah ◽  
Md. Kawsar Ali ◽  
Francesco Lo Monte ◽  
Suvash Chandra Paul ◽  
Adewumi John Babafemi ◽  
...  

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Wei He ◽  
Jihui Zhao ◽  
Gangqiang Yang

To clarify the role of steel slag powder in blended cement, steel slag powders with different amounts and particle sizes were mixed into blended cement and the inert quartz powder was selected as the reference. The influences of steel slag powder with different amounts and particle sizes on the hydration and hardening properties of blended cement were studied from hydration heat, nonevaporable water content, porosity, hydration products, and strength. The results show that the influence coefficient of nonevaporable water content (ՓWn) of blended cement paste is in an exponential relationship with the amount of steel slag powder. Moreover, at a dosage of 30%, ՓWn of blended cement gradually decreases with the increase of steel slag particle size. Both the early and late compressive strengths of blended cement are in a binomial relationship with the amount of steel slag powder. The influence coefficient of steel slag powder on the compressive strength of blended cement is negative at the age of 3 days, whereas it is positive at the age of 28 days. The chemical filling effect of 30% steel slag powder with different particle sizes in the blended cement paste is very small, only 1.13%–5.06%. The hydration products of blended cement containing steel slag are mainly amorphous C-S-H gels and platy Ca(OH)2, and their density are consistent with the law of their porosity.


Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 658
Author(s):  
Junfeng Guan ◽  
Yulong Zhang ◽  
Xianhua Yao ◽  
Lielie Li ◽  
Lei Zhang ◽  
...  

In this study, activator, metakaolin, and silica fume were used as a compound activator to improve the activity of steel slag powder. The influence of activator, steel slag powder, metakaolin, and silica fume on the resulting strength of steel slag cement mortar was investigated by orthogonal experiments. For four weight fractions of steel slag powder (10%, 20%, 30%, 40%), the experimental results indicate that the compressive strength of mortar can reach up to more than 85% of the control group while the flexural strength can reach up to more than 90% of the flexural strength of the control group. Through orthogonal analysis, it is determined that the activator is the primary factor influencing the mortar strength. According to the result of orthogonal analysis, the optimal dosages of activator, steel slag powder, metakaolin, and silica fume are suggested. The GM (0, N) prediction model of compressive strength and flexural strength was established, and the compressive strength and flexural strength of mortar with the optimal dosage combinations were predicted. The prediction results show that by using the optimal dosage combination, the mortar strength can reach the level of P·O·42.5 cement. Considering the different strength and cost requirements of cementitious materials in practical engineering, the economic benefits of replacing cement with steel slag powder activated by compound activator in various proportions and equal amounts were presented. The results show that the method proposed in this study can reduce the cost of cementitious materials.


2021 ◽  
Vol 787 (1) ◽  
pp. 012046
Author(s):  
Yuezhong Lin ◽  
Qingjiang Wang ◽  
Changsheng Wu ◽  
Chuanwei Wang

2021 ◽  
Author(s):  
Eethar Thanon Dawood ◽  
Marwa Saadi Mhmood

AbstractA quaternary supplementary cementitious materials as partial replacement of ordinary Portland cement decreases CO2 emission. This paper has investigated the properties of mortars made from different quaternary blends of wood ash, steel slag powder and glass powder with ordinary Portland cement at different replacement levels of 0, 24, 25, and 30% by weight of the binder. The blended mortar mixtures tested for flow, compressive strength and density. The results showed that the flow of mortars is decreased with the combined use of steel slag powder, glass powder, and wood ash compared with control mix. Compressive strength reduced with the combination of steel slag powder, glass powder and wood ash but this reduction effects is acceptable especially at 24% replacement contain super-plasticizer compared with the ecological benefit.


Sign in / Sign up

Export Citation Format

Share Document