Magnetic properties of ZnS doped with noble metals (X = Ru, Rh, Pd, and Ag)

We use the self-consistent, augmented space recursion technique to study the electronic structure and magnetic properties of alloys of the transition metal Fe with the noble metals Cu, Ag and Au. We analyze the effect of hybridization between the constituent bands on the electronic and magnetic properties.

Download Full-text

AEM analysis of crystallization in Ti-based amorphous alloys

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100075142 ◽

1983 ◽

Vol 41 ◽

pp. 270-271

Author(s):

A.R. Pelton ◽

A.F. Marshall ◽

Y.S. Lee

Keyword(s):

Magnetic Properties ◽

Amorphous Alloys ◽

Amorphous Materials ◽

Isothermal Annealing ◽

Amorphous Matrix ◽

Nucleation And Growth ◽

Current Interest ◽

Amorphous Films ◽

Electrical And Magnetic Properties

Amorphous materials are of current interest due to their desirable mechanical, electrical and magnetic properties. Furthermore, crystallizing amorphous alloys provides an avenue for discerning sequential and competitive phases thus allowing access to otherwise inaccessible crystalline structures. Previous studies have shown the benefits of using AEM to determine crystal structures and compositions of partially crystallized alloys. The present paper will discuss the AEM characterization of crystallized Cu-Ti and Ni-Ti amorphous films.Cu60Ti40: The amorphous alloy Cu60Ti40, when continuously heated, forms a simple intermediate, macrocrystalline phase which then transforms to the ordered, equilibrium Cu3Ti2 phase. However, contrary to what one would expect from kinetic considerations, isothermal annealing below the isochronal crystallization temperature results in direct nucleation and growth of Cu3Ti2 from the amorphous matrix.

Download Full-text

Microstructure in soft magnetic E3 (S1, Al) (Sendust) alloys

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100105916 ◽

1988 ◽

Vol 46 ◽

pp. 770-771

Author(s):

June D. Kim

Keyword(s):

Electron Microscopy ◽

Magnetic Properties ◽

Ternary Phase Diagram ◽

Vertical Tube ◽

Vacuum Induction Melting ◽

Induction Melting ◽

Soft Magnetic ◽

Quenching Temperature ◽

Thin Foils ◽

Vertical Tube Furnace

Iron-base alloys containing 8-11 wt.% Si, 4-8 wt.% Al, known as “Sendust” alloys, show excellent soft magnetic properties. These magnetic properties are strongly dependent on heat treatment conditions, especially on the quenching temperature following annealing. But little has been known about the microstructure and the Fe-Si-Al ternary phase diagram has not been established. In the present investigation, transmission electron microscopy (TEM) has been used to study the microstructure in a Sendust alloy as a function of temperature.An Fe-9.34 wt.% Si-5.34 wt.% Al (approximately Fe3Si0.6Al0.4) alloy was prepared by vacuum induction melting, and homogenized at 1,200°C for 5 hrs. Specimens were heat-treated in a vertical tube furnace in air, and the temperature was controlled to an accuracy of ±2°C. Thin foils for TEM observation were prepared by jet polishing using a mixture of perchloric acid 15% and acetic acid 85% at 10V and ∼13°C. Electron microscopy was performed using a Philips EM 301 microscope.

Download Full-text

Growth of near noble metal Pd and Pt thin film silicides morphology and structure

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100112464 ◽

1984 ◽

Vol 42 ◽

pp. 498-499

Author(s):

E. I. Alessandrini ◽

M. O. Aboelfotoh

Keyword(s):

Noble Metals ◽

Annealing Temperature ◽

Chemical Compounds ◽

Barrier Properties ◽

Solid State Reactions ◽

Transmission Electron ◽

Stable Chemical ◽

Metal Thickness ◽

Amorphous Si ◽

Si Films

Considerable interest has been generated in solid state reactions between thin films of near noble metals and silicon. These metals deposited on Si form numerous stable chemical compounds at low temperatures and have found applications as Schottky barrier contacts to silicon in VLSI devices. Since the very first phase that nucleates in contact with Si determines the barrier properties, the purpose of our study was to investigate the silicide formation of the near noble metals, Pd and Pt, at very thin thickness of the metal films on amorphous silicon.Films of Pd and Pt in the thickness range of 0.5nm to 20nm were made by room temperature evaporation on 40nm thick amorphous Si films, which were first deposited on 30nm thick amorphous Si3N4 membranes in a window configuration. The deposition rate was 0.1 to 0.5nm/sec and the pressure during deposition was 3 x 10 -7 Torr. The samples were annealed at temperatures in the range from 200° to 650°C in a furnace with helium purified by hot (950°C) Ti particles. Transmission electron microscopy and diffraction techniques were used to evaluate changes in structure and morphology of the phases formed as a function of metal thickness and annealing temperature.

Download Full-text

Microstructure and reactivity of small metal particles: The role of Ce additives

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100121995 ◽

1992 ◽

Vol 50 (1) ◽

pp. 318-319

Author(s):

L.D. Schmidt ◽

K. R. Krause ◽

J. M. Schwartz ◽

X. Chu

Keyword(s):

Atmospheric Pressure ◽

Noble Metals ◽

Mixed Oxides ◽

Catalytic Properties ◽

Chemical Shifts ◽

Catalytic Converter ◽

Structural Evolution ◽

Single Particles ◽

Small Metal Particles

The evolution of microstructures of 10- to 100-Å diameter particles of Rh and Pt on SiO2 and Al2O3 following treatment in reducing, oxidizing, and reacting conditions have been characterized by TEM. We are able to transfer particles repeatedly between microscope and a reactor furnace so that the structural evolution of single particles can be examined following treatments in gases at atmospheric pressure. We are especially interested in the role of Ce additives on noble metals such as Pt and Rh. These systems are crucial in the automotive catalytic converter, and rare earths can significantly modify catalytic properties in many reactions. In particular, we are concerned with the oxidation state of Ce and its role in formation of mixed oxides with metals or with the support. For this we employ EELS in TEM, a technique uniquely suited to detect chemical shifts with ∼30Å resolution.

Download Full-text