A Colorimetric Aptamer Biosensor Based on Gold Nanoparticles for the Ultrasensitive and Specific Detection of Tetracycline in Milk

2013 ◽  
Vol 66 (4) ◽  
pp. 485 ◽  
Author(s):  
Lan He ◽  
Yanfang Luo ◽  
Wenting Zhi ◽  
Yuangen Wu ◽  
Pei Zhou

This paper proposes a sensing strategy which employs an aptamer, unmodified gold nanoparticles (AuNP), and hexadecyltrimethylammonium bromide (CTAB) to detect tetracycline (TET) in raw milk. The method is based on the colorimetric assay of aggregating AuNP. In the absence of TET, the CTAB and aptamer form a complex which allows the aggregation of AuNP. In the presence of TET, the TET aptamer is exhausted first due to the formation of aptamer-TET complexes, which prevents assembly of the CTAB–aptamer supramolecule, causing a colour change and no aggregation of AuNP. This mechanism for the detection of TET proved to be sensitive and convenient. The colorimetric assay has a detection limit of 122 nM TET. This sensor has great potential for the sensitive, colorimetric detection of a wide range of molecular analytes.

Biosensors ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 113 ◽  
Author(s):  
Chia-Chen Chang ◽  
Tsz-Lian Hsu ◽  
Chie-Pein Chen ◽  
Chen-Yu Chen

A colorimetric assay was developed for the detection of biothiols, based on the peroxidase-like activity of iodine-capped gold nanoparticles (AuNPs). These AuNPs show a synergetic effect in the form of peroxidase-mimicking activity at the interface of AuNPs, while free AuNPs and iodine alone have weak catalytic properties. Thus, iodine-capped AuNPs possess good intrinsic enzymatic activity and trigger the oxidation of 3,3’,5,5’-tetramethylbenzidine (TMB), leading to a change in color from colorless to yellow. When added to solution, biothiols, such as cysteine, strongly bind to the interface of AuNPs via gold-thiol bonds, inhibiting the catalytic activity of AuNPs, resulting in a decrease in oxidized TMB. Using this strategy, cysteine could be linearly determined, at a wide range of concentrations (0.5 to 20 μM), with a detection limit of 0.5 μM using UV-Vis spectroscopy. This method was applied for the detection of cysteine in diluted human urine.


2014 ◽  
Vol 67 (5) ◽  
pp. 813 ◽  
Author(s):  
Minglei Yu

In this study, trace arsenic(iii) (AsIII) in aqueous solution was detected by applying a classical aptamer-based gold nanoparticles colorimetric sensing strategy. An arsenic aptamer was used as a sensing probe and gold nanoparticles as a colorimetric indicator. In the absence of AsIII, the gold nanoparticles were stabilised by the arsenic aptamer and remained dispersed at high NaCl concentrations, displaying a red solution. Contrarily, in the presence of AsIII, the gold nanoparticles were prone to aggregation, owing to the formation of aptamer–AsIII complex between the arsenic aptamer and AsIII, and thus exhibited a blue solution. By monitoring the colour change, a simple and fast colorimetric assay for AsIII was established with a detection range of 1.26–200 ppb and a detection limit of 1.26 ppb. Because this colorimetric assay only involves common reagents and can be assessed visually, it holds great potential for arsenic(iii) monitoring in environment-related and other applications.


2021 ◽  
Author(s):  
Deepshikha Shahdeo ◽  
Azmat Ali Khan ◽  
Amer M Alanazi ◽  
Yun Suk Huh ◽  
Shruti Shukla ◽  
...  

Abstract Ochratoxin A (OTA) is one of the predominant mycotoxins that contaminate a wide range of food commodities. In the present study, a 36-mer aptamer was used as a molecular recognition element coupled with gold nanoparticles (AuNPs) for colorimetric detection of OTA in a microfluidic paper-based analytical device (µPADs). The µPADs consisted of three zones: control, detection, and sample, interconnected by channels. The biophysical characterizations of aptamer conjugated AuNPs were done by UV-vis spectroscopy (UV-vis), dynamic Light Scattering (DLS), and transmission electron microscopy (TEM). The developed colorimetric assay for OTA showed a limit of detection of 242, 545, and 95.69 ng/mL in water, corn, and groundnut, respectively. The HPLC detection method achieved acceptable coefficient in standard curves (r2 = 0.9995), better detection range, and recovery rates in spiked corn and groundnut samples as 43.61 ± 2.18% to 87.10 ± 1.82% and 42.01 ± 1.31% to 86.03 ± 2.64% after multiple sample extractions and cleanup steps. However, the developed µPADs analytical device had the potent ability to rapidly detect OTA without any extraction pre-requirement, derivatization, and cleanup steps, thus illustrating its feasibility in the animal health sector, agricultural, and food industries.


Author(s):  
Sambit Dash ◽  
Pragna Rao ◽  
Ullas Kamath ◽  
Aparna R Pai ◽  
Prasanna Kumar Reddy Gayam ◽  
...  

Gold nanoparticles have found a wide range of application in biomedical sciences. Unique properties of these metal nanoparticles include surface plasmon resonance and size dependent colour change. Various molecules have been functionalized on the gold nanoparticles surface but carbohydrates have garnered attention due to their properties and their role in living systems. However certain challenges make carbohydrate-gold nanoparticles association difficult to obtain and stabilize. This study was carried out to chemically remodel gold nanoparticles by adding a monosaccharide mannose to its surface. A modified phase transfer method was used to synthesize gold nanoparticles. The surface of the nanoparticles was fixed with cyanuric chloride to serve as a linker. Mannose was then linked to the linker molecule. All three stages of the process, gold nanoparticles, and gold nanoparticles with linker and gold nanoparticles with the carbohydrate were analyzed for size and stability. Zeta potential and UV-vis data exhibited stable gold nanoparticles dispersion, successful binding of linker molecule as well as the carbohydrate. This study shows a simple, cost-effective and robust method of glycomodification of gold nanoparticles surface which can further find use in wide ranging applications.


2016 ◽  
Vol 45 (20) ◽  
pp. 8347-8354 ◽  
Author(s):  
Chen Dong ◽  
Genhua Wu ◽  
Zhuqing Wang ◽  
Wenzhi Ren ◽  
Yujie Zhang ◽  
...  

A colorimetric assay is proposed for the selective detection of Cr(iii) and Cr(vi) via the aggregation-induced color change of gallic acid capped gold nanoparticles (GA-AuNPs).


Biosensors ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 280
Author(s):  
Mengzhu Wang ◽  
Peng Liu ◽  
Hengjia Zhu ◽  
Bangxiang Liu ◽  
Xiangheng Niu

Due to the great threat posed by excessive nitrite in food and drinking water to human health, it calls for developing reliable, convenient, and low-cost methods for nitrite detection. Herein, we string nanozyme catalysis and diazotization together and develop a ratiometric colorimetric approach for sensing nitrite in food. First, hollow MnFeO (a mixture of Mn and Fe oxides with different oxidation states) derived from a Mn-Fe Prussian blue analogue is explored as an oxidase mimic with high efficiency in catalyzing the colorless 3,3′,5,5′-tetramethylbenzidine (TMB) oxidation to blue TMBox, presenting a notable signal at 652 nm. Then, nitrite is able to trigger the diazotization of the product TMBox, not only decreasing the signal at 652 nm but also producing a new signal at 445 nm. Thus, the analyte-induced reverse changes of the two signals enable us to establish a ratiometric colorimetric assay for nitrite analysis. According to the above strategy, facile determination of nitrite in the range of 3.3–133.3 μM with good specificity was realized, providing a detection limit down to 0.2 μM. Compared with conventional single-signal analysis, our dual-signal ratiometric colorimetric mode was demonstrated to offer higher sensitivity, a lower detection limit, and better anti-interference ability against external detection environments. Practical applications of the approach in examining nitrite in food matrices were also verified.


2017 ◽  
Vol 17 (2) ◽  
pp. 853-861 ◽  
Author(s):  
Hongru Zheng ◽  
Ying Li ◽  
Jingyue Xu ◽  
Jiaxin Bie ◽  
Xin Liu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document