scholarly journals Ratiometric Colorimetric Detection of Nitrite Realized by Stringing Nanozyme Catalysis and Diazotization Together

Biosensors ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 280
Author(s):  
Mengzhu Wang ◽  
Peng Liu ◽  
Hengjia Zhu ◽  
Bangxiang Liu ◽  
Xiangheng Niu
Keyword(s):  
Detection Limit ◽  
Signal Analysis ◽  
High Efficiency ◽  
Colorimetric Assay ◽  
Low Cost ◽  
Colorimetric Detection ◽  
Health It ◽  
Practical Applications ◽  
Higher Sensitivity

Due to the great threat posed by excessive nitrite in food and drinking water to human health, it calls for developing reliable, convenient, and low-cost methods for nitrite detection. Herein, we string nanozyme catalysis and diazotization together and develop a ratiometric colorimetric approach for sensing nitrite in food. First, hollow MnFeO (a mixture of Mn and Fe oxides with different oxidation states) derived from a Mn-Fe Prussian blue analogue is explored as an oxidase mimic with high efficiency in catalyzing the colorless 3,3′,5,5′-tetramethylbenzidine (TMB) oxidation to blue TMBox, presenting a notable signal at 652 nm. Then, nitrite is able to trigger the diazotization of the product TMBox, not only decreasing the signal at 652 nm but also producing a new signal at 445 nm. Thus, the analyte-induced reverse changes of the two signals enable us to establish a ratiometric colorimetric assay for nitrite analysis. According to the above strategy, facile determination of nitrite in the range of 3.3–133.3 μM with good specificity was realized, providing a detection limit down to 0.2 μM. Compared with conventional single-signal analysis, our dual-signal ratiometric colorimetric mode was demonstrated to offer higher sensitivity, a lower detection limit, and better anti-interference ability against external detection environments. Practical applications of the approach in examining nitrite in food matrices were also verified.

scholarly journals Chemical Modification of Combusted Coal Gangue for U(VI) Adsorption: Towards a Waste Control by Waste Strategy

2021 ◽  
Vol 13 (15) ◽  
pp. 8421
Author(s):  
Yuan Gao ◽  
Jiandong Huang ◽  
Meng Li ◽  
Zhongran Dai ◽  
Rongli Jiang ◽  
...  
Keyword(s):  
Structural Analysis ◽  
High Efficiency ◽  
Low Cost ◽  
Chemical Activation ◽  
Cost Effective ◽  
Coal Gangue ◽  
Order Kinetic ◽  
Practical Applications ◽  
Detailed Structural Analysis ◽  
Alkaline Conditions

Uranium mining waste causes serious radiation-related health and environmental problems. This has encouraged efforts toward U(VI) removal with low cost and high efficiency. Typical uranium adsorbents, such as polymers, geopolymers, zeolites, and MOFs, and their associated high costs limit their practical applications. In this regard, this work found that the natural combusted coal gangue (CCG) could be a potential precursor of cheap sorbents to eliminate U(VI). The removal efficiency was modulated by chemical activation under acid and alkaline conditions, obtaining HCG (CCG activated with HCl) and KCG (CCG activated with KOH), respectively. The detailed structural analysis uncovered that those natural mineral substances, including quartz and kaolinite, were the main components in CCG and HCG. One of the key findings was that kalsilite formed in KCG under a mild synthetic condition can conspicuous enhance the affinity towards U(VI). The best equilibrium adsorption capacity with KCG was observed to be 140 mg/g under pH 6 within 120 min, following a pseudo-second-order kinetic model. To understand the improved adsorption performance, an adsorption mechanism was proposed by evaluating the pH of uranyl solutions, adsorbent dosage, as well as contact time. Combining with the structural analysis, this revealed that the uranyl adsorption process was mainly governed by chemisorption. This study gave rise to a utilization approach for CCG to obtain cost-effective adsorbents and paved a novel way towards eliminating uranium by a waste control by waste strategy.

scholarly journals Immobilization of Pseudomonas aeruginosa static biomass on eggshell powder for on-line preconcentration and determination of Cr (VI)

2020 ◽  
Vol 18 (1) ◽  
pp. 303-313 ◽  
Author(s):  
Aamir Rasheed ◽  
Tahseen Ghous ◽  
Sumaira Mumtaz ◽  
Muhammad Nadeem Zafar ◽  
Kalsoom Akhter ◽  
...  
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Low Cost ◽  
Colorimetric Detection ◽  
Time Flow ◽  
Highly Sensitive ◽  
Glass Column ◽  
On Line ◽  
Preconcentration Time ◽  
Ultra Trace

AbstractIn the present work, a novel continuous flow system (CFS) is developed for the preconcentration and determination of Cr (VI) using Pseudomonas aeruginosa static biomass immobilized onto an effective and low-cost solid support of powdered eggshells. A mini glass column packed with the immobilized biosorbent is incorporated in a CFS for the preconcentration and determination of Cr (VI) from aqueous solutions. The method is based on preconcentration, washing and elution steps followed by colorimetric detection with 1,5-diphenyl carbazide in sulphuric acid. The effects of several variables such as pH, retention time, flow rate, eluent concentration and loaded volume are studied. Under optimal conditions, the CFS method has a linear range between 10 and 100 μg L-1 and a detection limit of 6.25 μg L-1 for the determination of Cr (VI). The sampling frequency is 10 samples per hour with a preconcentration time of 5 mins. Furthermore, after washing with a 0.1 M buffer (pH 3.0), the activity of the biosorbent is regenerated and remained comparable for more than 200 cycles. Scanning electron microscopy reveals a successful immobilization of biomass on eggshells powder and precipitation of Cr (VI) on the bacterial cell surface. The proposed method proves highly sensitive and could be suitable for the determination of Cr (VI) at an ultra-trace level.

scholarly journals Ruthenium Sensitizers and Their Applications in Dye-Sensitized Solar Cells

2012 ◽  
Vol 2012 ◽  
pp. 1-21 ◽  
Author(s):  
Yuancheng Qin ◽  
Qiang Peng
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Low Cost ◽  
Dye Sensitized Solar Cells ◽  
Ruthenium Complexes ◽  
Practical Applications ◽  
Photovoltaic Energy ◽  
Dye Sensitized ◽  
Sensitized Solar Cells ◽  
Excellent Stability

Dye-sensitized solar cells (DSSCs) have attracted considerable attention in recent years due to the possibility of low-cost conversion of photovoltaic energy. The DSSCs-based ruthenium complexes as sensitizers show high efficiency and excellent stability, implying potential practical applications. This review focuses on recent advances in design and preparation of efficient ruthenium sensitizers and their applications in DSSCs, including thiocyanate ruthenium sensitizers and thiocyanate-free ruthenium sensitizers.

scholarly journals Enhancement of the Peroxidase-Like Activity of Iodine-Capped Gold Nanoparticles for the Colorimetric Detection of Biothiols

Biosensors ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 113 ◽  
Author(s):  
Chia-Chen Chang ◽  
Tsz-Lian Hsu ◽  
Chie-Pein Chen ◽  
Chen-Yu Chen
Keyword(s):  
Gold Nanoparticles ◽  
Catalytic Activity ◽  
Detection Limit ◽  
Enzymatic Activity ◽  
Catalytic Properties ◽  
Colorimetric Assay ◽  
Colorimetric Detection ◽  
Synergetic Effect ◽  
Vis Spectroscopy ◽  
Wide Range

A colorimetric assay was developed for the detection of biothiols, based on the peroxidase-like activity of iodine-capped gold nanoparticles (AuNPs). These AuNPs show a synergetic effect in the form of peroxidase-mimicking activity at the interface of AuNPs, while free AuNPs and iodine alone have weak catalytic properties. Thus, iodine-capped AuNPs possess good intrinsic enzymatic activity and trigger the oxidation of 3,3’,5,5’-tetramethylbenzidine (TMB), leading to a change in color from colorless to yellow. When added to solution, biothiols, such as cysteine, strongly bind to the interface of AuNPs via gold-thiol bonds, inhibiting the catalytic activity of AuNPs, resulting in a decrease in oxidized TMB. Using this strategy, cysteine could be linearly determined, at a wide range of concentrations (0.5 to 20 μM), with a detection limit of 0.5 μM using UV-Vis spectroscopy. This method was applied for the detection of cysteine in diluted human urine.

Colorimetric Detection of Trace Arsenic(III) in Aqueous Solution Using Arsenic Aptamer and Gold Nanoparticles

2014 ◽  
Vol 67 (5) ◽  
pp. 813 ◽  
Author(s):  
Minglei Yu
Keyword(s):  
Aqueous Solution ◽  
Gold Nanoparticles ◽  
Detection Limit ◽  
Colorimetric Assay ◽  
Colorimetric Detection ◽  
Colour Change ◽  
Colorimetric Sensing ◽  
Detection Range ◽  
Colorimetric Indicator ◽  
Blue Solution

In this study, trace arsenic(iii) (AsIII) in aqueous solution was detected by applying a classical aptamer-based gold nanoparticles colorimetric sensing strategy. An arsenic aptamer was used as a sensing probe and gold nanoparticles as a colorimetric indicator. In the absence of AsIII, the gold nanoparticles were stabilised by the arsenic aptamer and remained dispersed at high NaCl concentrations, displaying a red solution. Contrarily, in the presence of AsIII, the gold nanoparticles were prone to aggregation, owing to the formation of aptamer–AsIII complex between the arsenic aptamer and AsIII, and thus exhibited a blue solution. By monitoring the colour change, a simple and fast colorimetric assay for AsIII was established with a detection range of 1.26–200 ppb and a detection limit of 1.26 ppb. Because this colorimetric assay only involves common reagents and can be assessed visually, it holds great potential for arsenic(iii) monitoring in environment-related and other applications.

A Colorimetric Aptamer Biosensor Based on Gold Nanoparticles for the Ultrasensitive and Specific Detection of Tetracycline in Milk

2013 ◽  
Vol 66 (4) ◽  
pp. 485 ◽  
Author(s):  
Lan He ◽  
Yanfang Luo ◽  
Wenting Zhi ◽  
Yuangen Wu ◽  
Pei Zhou
Keyword(s):  
Gold Nanoparticles ◽  
Detection Limit ◽  
Colorimetric Assay ◽  
Colorimetric Detection ◽  
Colour Change ◽  
Raw Milk ◽  
Hexadecyltrimethylammonium Bromide ◽  
Specific Detection ◽  
Wide Range

This paper proposes a sensing strategy which employs an aptamer, unmodified gold nanoparticles (AuNP), and hexadecyltrimethylammonium bromide (CTAB) to detect tetracycline (TET) in raw milk. The method is based on the colorimetric assay of aggregating AuNP. In the absence of TET, the CTAB and aptamer form a complex which allows the aggregation of AuNP. In the presence of TET, the TET aptamer is exhausted first due to the formation of aptamer-TET complexes, which prevents assembly of the CTAB–aptamer supramolecule, causing a colour change and no aggregation of AuNP. This mechanism for the detection of TET proved to be sensitive and convenient. The colorimetric assay has a detection limit of 122 nM TET. This sensor has great potential for the sensitive, colorimetric detection of a wide range of molecular analytes.

scholarly journals Label-Free Colorimetric Detection of Urine Glucose Based on Color Fading Using Smartphone Ambient-Light Sensor

Chemosensors ◽  
2020 ◽  
Vol 8 (1) ◽  
pp. 10 ◽  
Author(s):  
Wang ◽  
Guo ◽  
Hu ◽  
Liang ◽  
Li ◽  
...  
Keyword(s):  
Limit Of Detection ◽  
Colorimetric Assay ◽  
Point Of Care ◽  
Colorimetric Detection ◽  
Diabetic Patients ◽  
Ambient Light ◽  
Label Free ◽  
Urine Glucose ◽  
Light Sensor

In this work, a label-free colorimetric assay was developed for the determination of urine glucose using smartphone ambient-light sensor (ALS). Using horseradish peroxidase—hydrogen peroxide—3,3′,5,5′-tetramethylbenzidine (HRP-H2O2-TMB) colored system, quantitative H2O2 was added to samples to-be-determined for deepest color. The presence of glucose oxidase in urine led to the formation of H2O2 and the reduction of TMBred. As a result of this, the color of the urine faded and the solution changed from deep blue to light blue. We measured the illuminance of the transmitted light by a smartphone ambient light sensor, and thereby color changes were used to calculate the content of urine glucose. After method validation, this colorimetric assay was practically applied for the determination of urine samples from diabetic patients. Good linearity was obtained in the range of 0.039–10.000 mg/mL (R2 = 0.998), and a limit of detection was 0.005 mg/mL. Our method was had high accuracy, sensitivity, simplicity, rapidity, and visualization, providing a new sensor to be potentially applicable for point-of-care detection of urine glucose.

Two-Stage Algorithm for Rapid Determination of the Bending Sequence in Sheet Metal Products

1996 ◽  
Author(s):  
B. Radin ◽  
M. Shpitalni ◽  
I. Hartman
Keyword(s):  
Sheet Metal ◽  
Rapid Determination ◽  
Low Cost ◽  
Combinatorial Problem ◽  
Two Stage ◽  
Practical Applications ◽  
Second Stage ◽  
Bending Sequence ◽  
Time Limitations

Abstract This paper presents an algorithm for solving the complex and critical problem of bending sequence in sheet metal manufacturing. Finding the bending sequence and required tool assignment presents a large combinatorial problem which is impossible to solve optimally for practical applications within a reasonable period of time. The paper presents a two-stage algorithm. The first stage finds a feasible solution based upon collision avoidance heuristics. The second stage rapidly seeks an alternative feasible sequence with a lower cost without exceeding time limitations. The algorithm is very practical because it reaches a low-cost solution quickly within computer memory limitations. In this paper, the problem is defined, the approach is presented formally, and finally, the power of the algorithm is demonstrated by solving bending sequences for real products.

Two-Stage Algorithm for Determination of the Bending Sequence in Sheet Metal Products

1997 ◽  
Vol 119 (2) ◽  
pp. 259-266 ◽  
Author(s):  
B. Radin ◽  
M. Shpitalni ◽  
I. Hartman
Keyword(s):  
Sheet Metal ◽  
Low Cost ◽  
Combinatorial Problem ◽  
Two Stage ◽  
Practical Applications ◽  
Second Stage ◽  
Metal Products ◽  
Bending Sequence ◽  
Time Limitations

This paper presents an algorithm for solving the complex and critical problem of bending sequence in sheet metal manufacturing. Finding the bending sequence and required tool assignment presents a large combinatorial problem which is impossible to solve optimally for practical applications within a reasonable period of time. The paper presents a two-stage algorithm. The first stage finds a feasible solution based upon collision avoidance heuristics. The second stage rapidly seeks an alternative feasible sequence with a lower cost without exceeding time limitations. The algorithm is very practical because it reaches a low-cost solution quickly within computer memory limitations. In this paper, the problem is defined, the approach is presented formally, and finally, the power of the algorithm is demonstrated by solving bending sequences for real products.

The emerging applications of metal phosphides in carbon dioxide reduction reaction

2021 ◽  
Author(s):  
Sihao Wang ◽  
Gaofu Li ◽  
Lei Chen ◽  
Zhi Li ◽  
Zhuoyan Wu ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Electrical Conductivity ◽  
High Efficiency ◽  
Catalytic Mechanism ◽  
Low Cost ◽  
Carbon Dioxide Reduction ◽  
Reduction Reaction ◽  
Future Research ◽  
Practical Applications ◽  
Metal Phosphides

The development of low-cost and high-efficiency catalysts is very important to promote carbon dioxide reduction reaction (CO2RR). Metal phosphides (MPs) are promising catalysts for CO2 reduction because of their excellent electrical conductivity, good stability, high activity and selectivity. In this review, we summarize the latest progress of MPs in CO2RR from chemocatalysis, electrocatalysis and photocatalysis, and discuss in detail their advantages and catalytic mechanism. In the end, we provide some potential challenges and inspiring outlooks to serve as guidance for future research and practical applications of MPs in catalytic CO2 reduction.

Sign in / Sign up

Export Citation Format

Share Document