scholarly journals Effect of reduced lairage duration on beef quality

2007 ◽  
Vol 47 (7) ◽  
pp. 770 ◽  
Author(s):  
D. M. Ferguson ◽  
F. D. Shaw ◽  
J. L. Stark
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Quality Measures ◽  
Feedlot Cattle ◽  
Carcass Weight ◽  
Beef Quality ◽  
B Values ◽  
Quality Properties ◽  
Longissimus Lumborum ◽  
Muscle Glycogen Concentration

A study involving two groups of feedlot cattle (n = 84 and 112) was undertaken to compare the effect of two preslaughter lairage (L) durations (3 h v. 18 h) on carcass and meat quality properties. The cattle were grainfed for 150 days before slaughter and had a mean carcass weight of 347.0 ± 25.4 kg. Cattle from the same feedlot pen were randomly allocated to the two treatments on the day before slaughter. One group was transported to the abattoir the day before slaughter and held overnight (L–18 h) whereas the other group remained at the feedlot and was transported the following morning and remained in the lairage for 3 h before slaughter (L–3 h). After slaughter, meat quality was evaluated on a subset of 15 carcasses/lairage treatment from the two slaughter groups. Objective meat quality measures were made on unaged and 14-day-aged striploins (longissimus lumborum) from these carcasses. Cattle from the reduced lairage treatment had heavier bled bodyweights at slaughter (P < 0.05) but there was no effect (P > 0.05) on carcass weight, muscle glycogen concentration, pH3h, ultimate pH, shear force or Minolta lightness values. Significant interactions (P < 0.05) between lairage duration and aging were observed for cooking loss percentage and Minolta a* and b* values but these were relatively small in magnitude. There were no differences in the incidence of ingesta contamination or rumen rupture between the lairage treatments. It was concluded that shortening holding times in lairage from 18 to 3 h for cattle that have travelled <6 h would not affect carcass or beef quality.

scholarly journals Effect of cattle marketing method on beef quality and palatability

2007 ◽  
Vol 47 (7) ◽  
pp. 774 ◽  
Author(s):  
D. M. Ferguson ◽  
R. D. Warner ◽  
P. J. Walker ◽  
B. Knee
Keyword(s):  
Meat Quality ◽  
Muscle Glycogen ◽  
Shear Force ◽  
General Trend ◽  
Quality Measures ◽  
Shear Forces ◽  
Beef Quality ◽  
Consumer Panel ◽  
Longissimus Lumborum ◽  
Variable Impact

This study was conducted to determine the effect of direct consignment compared with saleyard marketing on beef quality and palatability. A total of 258 cattle (mean carcass weight 227 ± 19 kg) from nine vendor properties in Victoria, Australia were used. From each vendor group (about 30 cattle/vendor), half were either: (1) processed through a saleyard and then sent to the abattoir or (2) directly consigned to the abattoir. All cattle were slaughtered at the same abattoir and the lairage and postslaughter management of the cattle and their carcasses was standardised. The cattle that had been directly consigned were slaughtered the day after dispatch from the property, whereas saleyard cattle were slaughtered 2 days after dispatch. Striploin (longissimus lumborum) samples were evaluated 1 day postslaughter and after 14 days aging. Overall, marketing method had only a small impact on the various meat quality measures and palatability. A significant vendor × marketing method interaction was found for most traits including muscle glycogen (semimembranosus and semitendinosus), pH (1, 3 and 24 h postslaughter), L*, a* and b* colour values and consumer panel scores [tenderness, flavour and combined score (MQ4)]. Juiciness scores were unaffected by marketing method but were significantly influenced by vendor group (P < 0.001). For MQ4 score, there was a general trend showing that steaks from cattle that had been marketed through the saleyard had marginally lower MQ4 scores than those that had been directly consigned in five of the eight groups. However, this trend was only significant for two of the five groups. A significant three-way interaction between vendor group × marketing method × aging duration was found for shear force (P < 0.001) and cooking loss percentage (P < 0.001). The effect of marketing method on shear force was generally small and not always statistically significant but there was a trend indicating that saleyard marketing resulted in slightly higher shear forces at either 1 or 14 days postslaughter for the majority of the vendor groups. It was concluded that marketing method had a small but variable impact on palatability and meat quality.

scholarly journals Spray chilling on carcass weight loss, and physicochemical and microbiological quality of beef cuts during storage

2022 ◽  
Vol 52 (4) ◽  
Author(s):  
Cristiano Sales Prado ◽  
Moacir Evandro Lage ◽  
Maria Izabel Amaral Souza ◽  
Francine Oliveira Souza Duarte ◽  
Clarice Gebara ◽  
...  
Keyword(s):  
Weight Loss ◽  
Meat Quality ◽  
Shear Force ◽  
Storage Time ◽  
Microbiological Quality ◽  
Carcass Weight ◽  
Economic Losses ◽  
B Values ◽  
Subsequent Storage

ABSTRACT: Different chilling treatments are used before meat storage. The effect of spray chilling (SC) on meat quality appears to vary. Here, we investigated the effects of SC on beef carcass weight loss and meat quality during subsequent storage. The 2-h SC program tested involved 180-s initial spraying, followed by 60-s spray cycles at 540-s intervals. Deboned chuck tender (IMPS 116B) beef cuts were vacuum-packaged and stored for up to 60 d. Purge and cooking losses, Warner-Bratzler shear force, meat colour [CIE L*, a*, b*], and microbiological quality were evaluated. SC reduced carcass weight loss (P<0.001) compared with conventional chilling. However, storage time affected the purge and cooking losses, and Warner-Bratzler shear force. CIE a* and b* values increased (P<0.05) after 30-d aging in both chilling treatments. Pronounced psychrotrophic growth was observed during storage after both treatments. In conclusion, SC can be used to reduce the economic losses associated with meat chilling, without affecting meat quality attributes.

The influence of chilling rate and fat cover on beef quality

2001 ◽  
Vol 81 (3) ◽  
pp. 321-330 ◽  
Author(s):  
J. L. Aalhus ◽  
J. A. M. Janz ◽  
A. K. W. Tong ◽  
S. D. M. Jones ◽  
W. M. Robertson
Keyword(s):  
Electrical Stimulation ◽  
Meat Quality ◽  
Shear Force ◽  
Backfat Thickness ◽  
Meat Tenderness ◽  
Beef Quality ◽  
Wide Range ◽  
Average Shear ◽  
Longissimus Lumborum

The economic advantages of rapid carcass chilling include reduced cooling time, increased carcass processing rate, and decreased shrink and drip losses; however, it may also reduce subsequent meat tenderness, especially in lean carcasses. The present study examined the effects of blast chilling and electrical stimulation on quality of longissimus lumborum (LL) and semimembranosus muscles from carcasses with a wide range in backfat thickness (0 to 69 mm). Despite promoting a wide range in postmortem pH and temperature decline, backfat thickness had a limited effect on meat quality. There was a decrease in the proportion of carcasses with very high (>35 N cm–2) shear values and a tendency (P = 0.12) for the average shear force to decrease in the LL as backfat depth increased. Unexpectedly, leaner carcasses had less shrink loss than fatter carcasses under blast chill conditions. While blast chilling resulted in slightly darker, tougher meat, electrical stimulation was able to reduce these effects. Neither early postmortem pH nor temperature at 10 h was clearly associated with a pattern in shear force, although high pH10 was associated with tough steaks. Blast chilling in combination with electrical stimulation can be recommended to industry as a means to reduce chilling times and shrink losses while producing meat quality that is as good as, or slightly superior to conventionally cooled carcasses. Key words: Beef quality, blast chilling, electrical stimulation, fat thickness

Variability of the IGF2 locus in the Suino Nero Lucano pig population and its effects on meat quality

2018 ◽  
Vol 58 (11) ◽  
pp. 1976 ◽  
Author(s):  
Amalia Simonetti ◽  
Andrea Rando ◽  
Paola Di Gregorio ◽  
Carmelisa Valluzzi ◽  
Annamaria Perna ◽  
...  
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Quality Characteristics ◽  
Porcine Insulin ◽  
Drip Loss ◽  
Fat Percentage ◽  
Promoter Regions ◽  
Igf2 Gene ◽  
Longissimus Lumborum ◽  
L Value

The aim of this study was to analyse the polymorphisms in the two promoter regions, P1 and P2, of the porcine Insulin-like Growth Factor 2 (IGF2) gene and to investigate the effect of IGF2 genotypes on meat quality traits in the Italian autochthonous Suino Nero Lucano pig. Three polymorphic sites were analysed and only two of the eight potential haplotypes were observed in the Suino Nero Lucano pig population: A haplotype (–366A – –225G – –182C), and B haplotype (–366G – –225C – –182T). Muscle mass and meat quality characteristics were analysed in 30 castrated pigs (10 for each of the three IGF2 genotypes: A/A, A/B, and B/B). According to the results, B/B animals, at the same carcass weight, showed the highest Longissimus lumborum and Psoas weight (P < 0.05), whereas A/A animals showed a higher intramuscular fat percentage and lower Warner–Bratzler shear force, drip loss, and polyunsaturated fatty acids content. Meat from B/B animals showed also a higher L* value and myoglobin and deoxymyoglobin percentage compared with meat from A/A ones (P < 0.05).

Effect of grain or silage supplementation on meat quality attributes of cryptorchid lambs grazing lucerne or annual grass-clover pastures

1995 ◽  
Vol 35 (4) ◽  
pp. 461 ◽  
Author(s):  
DL Hopkins ◽  
PJ Holst ◽  
DG Hall
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
The Other ◽  
Carcass Weight ◽  
Annual Grass ◽  
Eye Muscle ◽  
Mean Values ◽  
Significant Difference ◽  
The Mean ◽  
Ad Libitum

Objective and subjective tests for quality were performed on the meat from 40 cryptorchid second-cross lambs fed lucerne only (L; n = 8), lucerne plus an oat grain supplement ad libitum (LO; n = lo), lucerne plus wilted lucerne silage ad libitum (LS; n = 11), or an oat-lupin grain (3:1) supplement at 90% of ad libitum while grazing dry summer annual pasture (OL; n = 11). All carcasses complied with the Elite lamb specification of weight >22 kg and GR measurement 6-15 mm. There was no significant difference between groups for hot carcass weight, the mean (� s.e) values being 25.1 0.43, 25.2 � 0.36,25.2 � 0.38, and 25.3 � 0.36 kg for L, LS, LO, and OL groups, respectively. When the GR and fat depth over the eye muscle at the 12th rib were adjusted to a common carcass weight of 25.2 kg there was no significant difference between groups. There was no significant difference between groups for pH, or the colour values a*, b*, and L* of the M. longissimus thoracis et lumborum (a* is relative redness, b* relative yellowness, and L* relative lightness). The shear force values for the loin muscle were significantly (P<0.05) greater for lambs from group OL than for those from group LO. Cooking loss for the loin muscle was significantly (P<0.05) greater for OL lambs than all other groups. A comparison of the mean values for aroma and flavour showed the lambs from group OL produced meat that was considered significantly (P<0.05) less desirable for these characteristics, with other groups being similar. Meat from OL-fed lambs was considered oilier and less meaty than meat from lambs fed the other diets. There was a significant (P<0.05) difference in absolute scores between panellists, but their ranking was not affected and there was no panellist x sample interaction. Because many producers use grain supplements such as oats and lupins for finishing lambs on dry forages, further study is recommended that focuses on the interaction between supplement and the base forage.

Effects of growth pathway on beef quality in 18-month-old Angus and South Devon ✕ Angus pasture-fed steers

2001 ◽  
Vol 72 (2) ◽  
pp. 297-308 ◽  
Author(s):  
P.D. Muir ◽  
N.B. Smith ◽  
P.M. Dobbie ◽  
D.R. Smith ◽  
M.D. Bown
Keyword(s):  
Meat Quality ◽  
Compensatory Growth ◽  
Live Weight ◽  
Considerable Effect ◽  
Growth Restriction ◽  
Carcass Weight ◽  
Winter Period ◽  
Meat Tenderness ◽  
Beef Quality ◽  
Significant Difference

AbstractThere is evidence that, in cattle, rapid compensatory growth after a period of growth restriction may increase the variability of beef quality and that variability is greater in breeds which reach larger body size at maturity. This experiment investigated the effect of compensatory growth following a period of winter growth restriction on carcass quality in steers of small and large mature size grazed on pasture. Angus (no. = 120) and South Devon ✕ Angus (SD✕ A; no. = 110) steers were allocated to non-restricted or restricted growth treatment groups and for 126 days over winter their grazing was managed to achieve mean live-weight gains of approximately 0·7 kg/day or to maintain live weight for each group respectively. Steers were slaughtered at the start (no. = 10 per breed) and end (no. = 20 per nutrition group (10 from each breed)) of the winter period for carcass evaluation. Thereafter, remaining steers were grazed together at a high pasture allowance to maximize growth and were slaughtered for carcass evaluation as they reached target live weights (Angus, 590 kg; SD✕ A, 620 kg). SD✕ A steers grew faster (P< 0·05) during both the winter and finishing periods and reached target slaughter live weights approximately 20 days earlier than Angus steers. SD✕ A steers also had leaner carcasses than Angus steers at each slaughter although there was no significant difference in meat quality between breeds. However, there was a significant effect of restriction treatment on carcass weight and meat quality. The non-restricted steers grew faster, had heavier carcasses and more tender steaks than restricted steers, although there was no significant difference in carcass fatness (adjusted for hot carcass weight). Muscle calpain activities were positively correlated with live-weight gain during the finishing period suggesting increased potential for post-mortem myofibrillar proteolysis and therefore increased meat tenderness. However, in the present experiment this was confounded by an increase in shear force with age-at-slaughter, especially in the non-restricted steers. Nevertheless, steers which were heaviest at the start of the experiment reached slaughter live weight earliest, were leaner than average and had higher calpain system activities at slaughter regardless of breed or restriction treatment. Furthermore, in the non-restricted group, high initial live weight and early slaughter was associated with lower pH and more tender meat. In conclusion, although restriction affected meat quality attributes, it appears that live weight prior to food restriction also had a considerable effect on carcass characteristics at slaughter. Therefore, the characteristics of the early growth phase prior to the finishing period may have important consequences for meat quality.

Timing and duration of low voltage electrical stimulation on selected meat quality characteristics of light and heavy cattle carcasses

2020 ◽  
Vol 60 (7) ◽  
pp. 967
Author(s):  
E. C. Webb ◽  
B. Agbeniga
Keyword(s):  
Electrical Stimulation ◽  
Meat Quality ◽  
Shear Force ◽  
Sarcomere Length ◽  
Low Voltage ◽  
Carcass Weight ◽  
Drip Loss ◽  
Early Application ◽  
Early Stimulation ◽  
Stimulation Parameters

Context The present study investigated the effects of several electrical-stimulation parameters with conventional chilling of heavy- and light-grade carcasses from commercial feedlot cattle on selected meat-quality attributes. Aims The aim was to determine the combination of electrical-stimulation parameters that produced the most desirable results in terms of meat quality, which will serve as a guide to processors seeking to enact best processes in the meat industry. Methods Low-voltage electrical stimulation (110 V peak, 17 pulses/s, 5-ms pulse width) was applied either early post-mortem (PM) at 7 min or late PM at 45 min, for either 30 or 60 s on steer carcasses (n = 98) divided into two weight categories (light (≤260 kg) and heavy (≥290 kg) grades). The Longissimus lumborum muscle was evaluated for sarcomere length, myofibril fragment length (MFL), calpain-1, calpastatin, shear force and drip loss (3 and 14 days PM). Key results There were no significant differences in sarcomere length and no sarcomere shortening was observed. There were minor inconsistencies where early stimulation coincided with marginally longer MFL at 3 and 14 days PM, while late stimulation produced the shortest MFL at 14 days PM. Higher decline in calpain-1 concentration (mean 36.2%) was recorded in the early stimulated carcasses compared with the late stimulated carcasses (mean 29.7%) from 1 to 24 h PM, while calpastatin concentration decreased at a similar rate (mean 24%). Early stimulation resulted in lower shear force (P &lt; 0.05) at 3 days PM, especially in the heavier carcasses, indicating that higher initial temperature did accelerate tenderisation. At 14 days PM, there were no significant differences in shear force as regards stimulation time or carcass weight. Higher drip loss was however recorded in the early stimulated carcasses. Conclusions Early application of low-voltage electrical stimulation produced faster tenderisation early PM, due to higher rigor temperature, but, after aging for 14 days, all meat was acceptably tender with a lower variability, regardless of the stimulation time and carcass weight. Higher drip loss was associated with higher tenderness, which is normal and not a defect. Implications The use of low-voltage electrical stimulation should be encouraged for its ability to reduce variability in meat quality due to carcass-weight differences, especially in the current feedlot systems.

scholarly journals Performance, carcass parameters, meat quality and lipid profile from feedlot young bulls fed cottonseed

2017 ◽  
Vol 18 (2) ◽  
pp. 347-358
Author(s):  
Claudiana ESTEVES ◽  
Mary Suzan VARASCHIN ◽  
Cesar Augusto Pospissil GARBOSSA ◽  
Joanna Oliveira MARÇAL ◽  
Fernanda Paul de CARVALHO ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Meat Quality ◽  
Fatty Acid Profile ◽  
Shear Force ◽  
Histological Analysis ◽  
Control Diet ◽  
Feedlot Cattle ◽  
Daily Weight Gain ◽  
Carcass Parameters ◽  
Nelore Cattle

SUMMARY The objective of this study was to evaluate the performance, carcass, meat quality, fatty acid profile and liver alterations of cattle supplemented with cottonseed feedlot. It used 100 Nelore cattle, being divided into two groups of 50 animals, which received a cottonseed (CS) in grain form by the diet in the proportion of 15% and the other group was provided with control diet without CS in the feedlot for 88 days. The diets were isoprotein and isoenergetic and concentrate:roughage ratio of 60:40. The animals were slaughter in the end of experimental time and the collection of liver samples for histological analysis. After cooling 24 hours at ± 1°C were conducted evaluation of carcass and major cuts, final pH and collected muscle samples longissimus to carry out the physicochemical analyzes (Color, Cooking Loss, Pigments and Shear Force), chemical composition, fatty acid profile and oxidation. The inclusion of CS in the diet provided animals with higher slaughter weight, daily weight gain, Hindquarter, however, the animals showed reduced carcass yield, forequarter weight and Thin flank, without changing the parameters as rib-eye area and backfat thickness. There was an increase of the yellow values (b*) and moisture with the final pH reduction. There was no influence of the use of cottonseed in relation to histological parameters evaluated in the liver. The cottonseed in the feeding feedlot cattle promoted improvement in animal performance, despite the reduction of the forequarter weight, with appropriate aspects of meat quality, fatty acid profile and conservation.

scholarly journals Growth performance, and carcass and meat quality traits in progeny of Poll Nellore, Angus and Brahman sires under tropical conditions

2015 ◽  
Vol 55 (10) ◽  
pp. 1295 ◽  
Author(s):  
A. S. C. Pereira ◽  
F. Baldi ◽  
R. D. Sainz ◽  
B. L. Utembergue ◽  
H. L. J. Chiaia ◽  
...  
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Average Daily Gain ◽  
Carcass Weight ◽  
Zebu Cattle ◽  
Meat Tenderness ◽  
Marbling Score ◽  
Tropical Conditions ◽  
Significant Difference ◽  
Dressing Percentage

This study aimed to characterise progeny of sires representing major families in the Poll Nellore breed. Fourteen Poll Nellore sires, two Angus sires and one Brahman sire were mated by AI to ~400 multiparous Poll Nellore dams. Calves were raised and stocked on pasture in central Brazil until reaching ~18 months of age, then fed a sugarcane bagasse-based diet on an ad libitum basis until reaching market weight and finish (average 23 months). There were 236 Poll Nellore (N), 38 Angus × Poll Nellore (AN) and 31 Brahman × Poll Nellore (BN) calves born in total. The weaning and 423-day weight weights, and growth rates and pre- and post-weaning were greater (P < 0.05) in males than in female calves, and were influenced by breed and by sire within the N animals. The weaning weights were higher (P < 0.05) in AN and BN than in N calves. The 423-day weight weights were greater (P < 0.05) in AN calves, followed by BN, with straightbred N being lightest. Feedlot average daily gain was unaffected (P > 0.05) by sex or by sire within N, but was lowest (P < 0.05) in N cattle, and highest in AN and BN animals, which did not differ (P > 0.05). Heifers reached the end of the study with lower bodyweight (BW) and dressing percentage than steers, resulting in lower carcass weights, smaller longissimus muscle areas (LMA), but greater 12th to 13th rib backfat (BF) and similar marbling score and mean shear force. However, the proportion of carcasses grading Choice or Prime was numerically greater in heifers than in steers (23.6% vs 9.8%). AN cattle reached greater harvest weights than BN, and those were heavier than N cattle (P < 0.001). However, dressing percentages were lowest in AN animals, so that there was no significant difference in carcass weight between AN and BN cattle. AN carcasses also had greater LMA, BF and marbling scores than the N carcasses. The proportion of carcasses grading Choice or Prime was numerically greater in AN cattle than in the BN and N groups (25.9%, 11.8% and 15.9%, respectively). Steaks from AN calves were more tender than N steaks, with the BN steaks being intermediate. There was significant variation among N sires for final BW, dressing percentage, carcass weight, LMA and marbling score, but not for BF or mean shear force. The percentages of carcasses of N cattle grading Choice or Prime ranged from 0% to 61.5%. Three N sires produced progeny with greater than 40% of carcasses grading Choice or above (Berílio OB, Furador OB, and Litoral OB). Likewise, three N sires (Blitz OB, Furador OB and Sossego OB) had progeny with 67%, 62% and 75%, respectively, of steaks classified as tender. This study confirmed that Zebu cattle have inferior carcass and meat quality relative to AN crossbreds under tropical conditions, however there is substantial variation within the N breed for these traits, and several sires have a proportion of their progeny comparable in terms of meat tenderness to those of Angus sires.

scholarly journals Effect of repeated implants of oestradiol-17β on beef palatability in Brahman and Braham cross steers finished to different market end points

2008 ◽  
Vol 48 (11) ◽  
pp. 1434 ◽  
Author(s):  
J. M. Thompson ◽  
R. Polkinghorne ◽  
M. Porter ◽  
H. M. Burrow ◽  
R. A. Hunter ◽  
...  
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Bos Taurus ◽  
Bos Indicus ◽  
Meat Tenderness ◽  
Sensory Testing ◽  
Anterior Portion ◽  
End Points ◽  
Longissimus Lumborum ◽  
Quality Measurements

The effect of repeated implantation with 20 mg oestradiol-17β (Compudose 100) on carcass and meat quality traits was investigated using 478 Bos indicus and B. indicus × Bos taurus cross steers finished on either pasture or grain to achieve carcass weight for one of three market end points (domestic, 220 kg; Korean, 280 kg; or Japanese, 340 kg). In the oestradiol-17β treatment group, animals were administered implants at ~100-day intervals, with the number of implants administered to any steer ranging from one to eight. Cattle were slaughtered and at boning the anterior portion of the M. longissimus lumborum was removed and frozen after aging for 1 day for later objective meat quality measurements (shear force, compression and cook loss %). The adjoining portion was aged for 14 days before consumer sensory testing using the Meat Standards Australia protocols. Each sample was scored for tenderness, juiciness, like flavour and overall liking by 10 untrained consumers. Implanting increased carcass weights and ossification scores (P < 0.05) and reduced marbling scores in comparison to non-implanted carcasses. For tenderness, like flavour, overall liking and MQ4 scores there was a significant (P < 0.05) interaction between B. indicus content and oestradiol-17β treatment, whereby high B. indicus content cattle that were implanted with oestradiol-17β had the lowest sensory scores. The number of implants administered did not affect carcass weights or marbling scores, whereas ossification scores increased in carcasses as the number of implants increased. The number of implants administered had no effect (P > 0.05) on sensory scores, or objective meat tenderness.

Sign in / Sign up

Export Citation Format

Share Document