scholarly journals From an irrigation system to an ecological asset: adding environmental flows establishes recovery of a threatened fish species

2019 ◽  
Vol 70 (9) ◽  
pp. 1295 ◽  
Author(s):  
Ivor Stuart ◽  
Clayton Sharpe ◽  
Kathryn Stanislawski ◽  
Anna Parker ◽  
Martin Mallen-Cooper

Worldwide, riverine fish are the target of environmental water because populations have declined in lotic river habitats following river regulation. Murray cod is an endangered Australian riverine fish with remaining populations associated with lotic river reaches with instream habitat, including some creeks operated as part of irrigation systems. Our objectives were to develop a life history model, apply the building block method of environmental flows to enhance the abundance of juvenile Murray cod and promote population recovery. From 2008 to 2018 we evaluated changes to Murray cod juvenile abundance before and after implementation of a perennial environmental flow regime that began in 2013. During the first year of the environmental flow, larvae were collected as evidence of spawning. Murray cod abundance can be enhanced with environmental flows that target: (1) an annual spring spawning or recruitment flow with no rapid water level drops; (2) maximising hydrodynamic complexity (i.e. flowing habitats that are longitudinally continuous and hydrodynamically complex); and (3) an annual base winter connection flow. Recognition that incorporating hydraulics (water level and velocity) at fine and coarse time scales, over spatial scales that reflect life histories, provides broader opportunities to expand the scope of environmental flows to help restore imperilled fish species in regulated ecosystems.

2021 ◽  
Author(s):  
Ali Mobadersani ◽  
Ali Hosseinzadeh Dalir ◽  
Mehdi Yasi ◽  
Hadi Arvanaghi ◽  
Mark Kennard

Abstract In the conducted researches recently the greatest focus has been on the environmental water supplement of rivers individually and independently. However, in closed basins leading to lakes and wetlands, a comprehensive and integrated view of all rivers in the basin is required simultaneously. This has affected Lake Urmia, which is the second largest saltwater lake in the world. This lake has been in danger of drying up in recent years as a result of not allocating the required environmental flow due to the increase in water resources consumption in the agricultural sector and climate change. In this study, a method derived from the flow duration curve (FDC) shifting method is presented in addition to the possibility of providing the environmental flow of rivers leading to the lake that can make the least amount of change in the hydrological characteristics of rivers to provide the volume of required water by the ecosystem of lakes or downstream wetlands. This method is based on daily data of hydrometric stations and, unlike the conventional method, which presents the results on a monthly basis, it can calculate the amount of environmental requirement of rivers in real-time according to the upstream inlet of the river. This method has been used in the Urmia Lake basin and according to the results, it can provide the environmental requirement of lake by allocating 70.5% of the annual flow of rivers and save the lake and the ecosystem of the region from the current critical conditions.


2021 ◽  
Vol 9 ◽  
Author(s):  
Eric D. Stein ◽  
Julie Zimmerman ◽  
Sarah M. Yarnell ◽  
Bronwen Stanford ◽  
Belize Lane ◽  
...  

Environmental flow programs aim to protect aquatic habitats and species while recognizing competing water demands. Often this is done at the local or watershed level because it is relatively easier to address technical and implementation challenges at these scales. However, a consequence of this approach is that ecological flow criteria are developed for only a few areas as dictated by funding and interest with many streams neglected. Here we discuss the collaborative development of the California Environmental Flows Framework (CEFF) as an example process for developing environmental flow recommendations at a statewide scale. CEFF uses a functional flows approach, which focuses on protecting a broad suite of ecological, geomorphic, and biogeochemical functions instead of specific species or habitats, and can be applied consistently across diverse stream types and spatial scales. CEFF adopts a tiered approach in which statewide models are used to estimate ecological flow needs based on natural functional flow ranges, i.e., metrics that quantify the required magnitude, timing, duration, frequency, and/or rate-of-change of functional flow components under reference hydrologic conditions, for every stream reach in the state. Initial flow needs can then be revised at regional, or watershed, scales based on local constraints, management objectives, and available data and resources. The third tier of CEFF provides a process for considering non-ecological flow needs to produce a final set of environmental flow recommendations that aim to balance of all desired water uses. CEFF was developed via a broad inclusive process that included technical experts across multiple disciplines, representatives from federal and state agencies, and stakeholders and potential end-users from across the state. The resulting framework is therefore not associated with any single agency or regulatory program but can be applied under different contexts, mandates and end-user priorities. The inclusive development of CEFF also allowed us to achieve consensus on the technical foundations and commitment to applying this approach in the future.


Author(s):  
Ryan Morrison ◽  
Erin Bray

Environmental flows are commonly defined as the river-flow characteristics necessary to maintain the integrity of riverine ecosystems. The concept of environmental flows has evolved over the past half-century, beginning with the development of minimum instream flows necessary to protect a single fish species to current frameworks for holistically including all aspects of river health that depend on natural flow regimes. This also includes the interaction of terrestrial environments with riverine ecosystems during large flooding events. The challenges associated with defining and implementing environmental flows are numerous, and they sometimes lack data necessary to define flow-ecology relationships, appropriate temporal and spatial scales for environmental flow applications, and incorporate environmental flows into water management policy. Given these challenges, researchers and practitioners have made incredible advances in better understanding the relationships between river health and flow dynamics, including the links among flow, sediment, temperature, and human activities. In addition, computational advances have allowed researchers to more accurately model flow-habitat relationships at fine scales, providing a more complete understanding of the connection between flow and habitat needs for riverine species. All these advances benefit from holistic frameworks that guide environmental flow development and applications while considering the needs of other water uses in a river system. This article presents relevant studies regarding approaches for developing environmental flows, relationships between riverine ecology and flow dynamics, and policy frameworks and tools useful for implementing environmental flows in practice.


2021 ◽  
Vol 9 ◽  
Author(s):  
Andrew John ◽  
Avril Horne ◽  
Rory Nathan ◽  
Keirnan Fowler ◽  
J. Angus Webb ◽  
...  

Climate change presents severe risks for the implementation and success of environmental flows worldwide. Current environmental flow assessments tend to assume climate stationarity, so there is an urgent need for robust environmental flow programs that allow adaptation to changing flow regimes due to climate change. Designing and implementing robust environmental flow programs means ensuring environmental objectives are achieved under a range of uncertain, but plausible climate futures. We apply stress testing concepts previously adopted in water supply management to environmental flows at a catchment scale. We do this by exploring vulnerabilities in different river management metrics for current environmental flow arrangements in the Goulburn River, Australia, under non-stationary climatic conditions. Given the limitations of current environmental flows in supporting ecological outcomes under climate change, we tested three different adaptation options individually and in combination. Stress testing adaptation results showed that increasing environmental entitlements yielded the largest benefits in drier climate futures, whereas relaxing river capacity constraints (allowing more targeted delivery of environmental water) offered more benefits for current and wetter climates. Combining both these options led to greater than additive improvements in allocation reliability and reductions in environmental water shortfalls, and these improvements were achieved across a wider range of climatic conditions than possible with either of the individual options. However, adaptation may present additional risks to some ecological outcomes for wetter climates. Ultimately, there was a degree of plausible climate change beyond which none of the adaptation options considered were effective at improving ecological outcomes. This study demonstrates an important step for environmental flow assessments: evaluating the feasibility of environmental outcomes under climate change, and the intervention options that prove most robust under an uncertain future.


2018 ◽  
Vol 28 (3) ◽  
pp. 315-327 ◽  
Author(s):  
D. R. Barneche ◽  
E. L. Rezende ◽  
V. Parravicini ◽  
E. Maire ◽  
G. J. Edgar ◽  
...  

In the current condition, it is difficult to increase plant development and reduce expenses in agricultural sectors; nevertheless, an advanced thought leads to the use of an automated model that introduces automation in the irrigation system, which can aid in improved water and human resources management. An automated model has been developed using sensors and microcontroller technology, to make the most efficient use of water supply for irrigation. A soil moisture content detector is inserted into the soil of the crops, and an ultrasonic sensor is placed above the soil of the crops to measure the water level after irrigation has begun. A C++ program with threshold values for the moisture sensor was used to start the system in the crop field depending on the soil moisture level, and an ultrasonic sensor was used to control the water in the crop field. The Arduino UNO board is a microcontroller inbuilt of Atmel in the mega AVR family (ATMega328) and the sensors were used to lead the model in turning ON/OFF. A microcontroller was included in this model to run the program by receiving sensor input signals and converting them to soil water content and water level values in the crop field. The microcontroller began by receiving input values, which resulted in an output instructing the relay to turn on the groundwater pump. An LCD screen has also been interfaced with the microcontroller to show the percentage of moisture in the soil, field water level, and pump condition. When the soil moisture level reaches 99 percent and the water level reaches 6 cm after 2.5 and 4 minutes, respectively, the pump is turned off. This model, according to the study, might save water, time, and reduce human effort.


2019 ◽  
Author(s):  
Tania Nasreen ◽  
Nora A. S. Hussain ◽  
Mohammad Tarequl Islam ◽  
Fabini D. Orata ◽  
Paul C. Kirchberger ◽  
...  

ABSTRACTVibrio metoecus is a recently described and little studied causative agent of opportunistic infections in humans, often coexisting with V. cholerae in aquatic environments. However, the relative abundance of V. metoecus with V. cholerae and their population dynamics in aquatic reservoirs is still unknown. We developed a multiplex qPCR assay with a limit of detection of three copies per reaction to simultaneously quantify total V. metoecus and V. cholerae abundance, as well as the toxigenic and O1 serogroup subpopulations of V. cholerae from environmental samples. Four different genes were targeted as specific markers for individual Vibrio species or subpopulations; viuB, a gene encoding a vibriobactin utilization protein, was used to quantify the total V. cholerae population. The cholera toxin gene ctxA provided an estimation of toxigenic V. cholerae abundance, while the rfbO1 gene specifically detected and quantified V. cholerae belonging to the O1 serogroup, which includes almost all lineages of the species responsible for the majority of past and ongoing cholera pandemics. To measure V. metoecus abundance, the gene mcp, encoding methyl accepting chemotaxis protein, was used. Marker specificity was confirmed by testing several isolates of V. cholerae and V. metoecus alongside negative controls of isolates within and outside of the Vibrio genus. Analysis of environmental water samples collected from four different geographic locations including cholera-endemic (Dhaka, Kuakata and Mathbaria in Bangladesh) and non-endemic (Oyster Pond in Falmouth, Massachusetts, USA) regions showed that V. metoecus was only present in the USA site, recurring seasonally. Within the coastal USA site, the non-toxigenic O1 serogroup represented up to ∼18% of the total V. cholerae population. V. cholerae toxigenic O1 serogroup was absent or present in low abundance in coastal Bangladesh (Kuakata and Mathbaria) but constituted a relatively high proportion of the total V. cholerae population sustained throughout the year in inland Bangladesh (Dhaka). A preference for host/particle attachment was observed, as the majority of cells from both Vibrio species (>90%) were identified in the largest water size fraction sampled, composed of particles or organisms >63 μm and their attached bacteria. This is the first study to apply a culture-independent method to quantify V. cholerae or V. metoecus directly in environmental reservoirs of areas endemic and non-endemic for cholera on significant temporal and spatial scales.SIGNIFICANCECholera is a life-threatening disease that requires immediate intervention; it is of prime importance to have fast, accurate and sensitive means to detect V. cholerae. Consistent environmental monitoring of the abundance of V. cholerae along with its toxigenic and O1 serogroup subpopulations could facilitate the determination of the actual distribution of this organism in aquatic reservoirs and thus help to predict an outbreak before it strikes. The lack of substantial temporal and spatial environmental sampling, along with specific quantitative measures, has made this goal elusive so far. The same is true for V. metoecus, a close relative of V. cholerae which has been associated with several clinical infections and could likely pose an emerging threat, readily exchanging genetic material with its more famous relative.


2021 ◽  
Vol 1 (1) ◽  
pp. 53-64
Author(s):  
Lukman Medriavin Silalahi ◽  
Setiyo Budiyanto ◽  
Freddy Artadima Silaban ◽  
Arif Rahman Hakim

Irrigation door is a big issue for farmers. The factor that became a hot issue at the irrigation gate was the irresponsible attitude of the irrigation staff regarding the schedule of opening/closing the irrigation door so that it caused the rice fields to becoming dry or submerged. In this research, an automatic prototype system for irrigation system will be designed based on integrating several sensors, including water level sensors, soil moisture sensors, acidity sensors. This sensor output will be displayed on Android-based applications. The integration of communication between devices (Arduino Nano, Arduino Wemos and sensors supporting the irrigation system) is the working principle of this prototype. This device will control via an Android-based application to turn on / off the water pump, to open/close the irrigation door, check soil moisture, soil acidity in real time. The pump will automatically turn on based on the water level. This condition will be active if the water level is below 3cm above ground level. The output value will be displayed on the Android-based application screen and LCD screen. Based on the results of testing and analysis of the prototype that has been done in this research, the irrigation door will open automatically when the soil is dry. This condition occurs if the water level is less than 3 cm. The calibrated Output value, including acidity sensor, soil moisture sensor and water level sensor, will be sent to the server every 5 seconds and forwarded to an Android-based application as an output display.


Sign in / Sign up

Export Citation Format

Share Document