scholarly journals Nonequilibrium site distribution governs charge-transfer electroluminescence at disordered organic heterointerfaces

2019 ◽  
Vol 116 (47) ◽  
pp. 23416-23425 ◽  
Author(s):  
Armantas Melianas ◽  
Nikolaos Felekidis ◽  
Yuttapoom Puttisong ◽  
Stefan C. J. Meskers ◽  
Olle Inganäs ◽  
...  

The interface between electron-donating (D) and electron-accepting (A) materials in organic photovoltaic (OPV) devices is commonly probed by charge-transfer (CT) electroluminescence (EL) measurements to estimate the CT energy, which critically relates to device open-circuit voltage. It is generally assumed that during CT-EL injected charges recombine at close-to-equilibrium energies in their respective density of states (DOS). Here, we explicitly quantify that CT-EL instead originates from higher-energy DOS site distributions significantly above DOS equilibrium energies. To demonstrate this, we have developed a quantitative and experimentally calibrated model for CT-EL at organic D/A heterointerfaces, which simultaneously accounts for the charge transport physics in an energetically disordered DOS and the Franck–Condon broadening. The 0–0 CT-EL transition lineshape is numerically calculated using measured energetic disorder values as input to 3-dimensional kinetic Monte Carlo simulations. We account for vibrational CT-EL overtones by selectively measuring the dominant vibrational phonon-mode energy governing CT luminescence at the D/A interface using fluorescence line-narrowing spectroscopy. Our model numerically reproduces the measured CT-EL spectra and their bias dependence and reveals the higher-lying manifold of DOS sites responsible for CT-EL. Lowest-energy CT states are situated ∼180 to 570 meV below the 0–0 CT-EL transition, enabling photogenerated carrier thermalization to these low-lying DOS sites when the OPV device is operated as a solar cell rather than as a light-emitting diode. Nonequilibrium site distribution rationalizes the experimentally observed weak current-density dependence of CT-EL and poses fundamental questions on reciprocity relations relating light emission to photovoltaic action and regarding minimal attainable photovoltaic energy conversion losses in OPV devices.

2013 ◽  
Vol 211 (3) ◽  
pp. 651-655 ◽  
Author(s):  
Jorge Oliva ◽  
Elder De la Rosa ◽  
Luis Diaz-Torres ◽  
Anvar Zakhidov

MRS Advances ◽  
2016 ◽  
Vol 1 (45) ◽  
pp. 3083-3088 ◽  
Author(s):  
Sujoy Kumar Ghosh ◽  
Dipankar Mandal

ABSTRACTA ferroelectric nanogenerator without any electric poling treatment has been realized by incorporation of ytterbium (Yb) salt incorporated porous PVDF composite film. The composite film compose of electroactive β- and γ-phases, demonstrates higher dielectric and ferroelectric polarization responses than pure PVDF film. The 3 V of open circuit voltage with 0.47 µW/cm2 power density was generated by the nanogenerator upon single finger touch. It can also operate capacitor and light emitting diode without any subsidiary batteries.


MRS Bulletin ◽  
2008 ◽  
Vol 33 (7) ◽  
pp. 676-682 ◽  
Author(s):  
Henning Sirringhaus ◽  
Masahiko Ando

AbstractOrganic field-effect transistors (FETs) are currently the focus of significant academic research and industrial development interest, as they potentially offer unique advantages over their inorganic counterparts in terms of cost reductions, compatibility with low-temperature and printing-based manufacturing, and potentially even performance. The first generation of products incorporating organic FETs is presently being introduced to the market. This article provides an overview of strategies for achieving high field-effect mobilities in solution-processed organic semiconductor films. We provide an assessment of materials challenges to meet performance and reliability requirements for a range of display and circuit applications and present an overview of state-of-the-art application demonstrations in active-matrix addressing of flexible eletrophoretic, organic light-emitting diode, and liquid-crystal displays, as well as radio-frequency identification tagging. We discuss how the unique functional properties of organic semiconductors, which allow comparatively easy integration of information processing, information storage, light emission, and light detection functions, might enable multifunctional applications that are not easy to create with other material systems.


2015 ◽  
Vol 137 (16) ◽  
pp. 5397-5405 ◽  
Author(s):  
Andrew N. Bartynski ◽  
Mark Gruber ◽  
Saptaparna Das ◽  
Sylvie Rangan ◽  
Sonya Mollinger ◽  
...  

2009 ◽  
Vol 95 (12) ◽  
pp. 123303 ◽  
Author(s):  
Koen Vandewal ◽  
Wibren D. Oosterbaan ◽  
Sabine Bertho ◽  
Veerle Vrindts ◽  
Abay Gadisa ◽  
...  

2012 ◽  
Vol 584 ◽  
pp. 290-294 ◽  
Author(s):  
Jeyaprakash Pandiarajan ◽  
Natarajan Jeyakumaran ◽  
Natarajan Prithivikumaran

The promotion of silicon (Si) from being the key material for microelectronics to an interesting material for optoelectronic application is a consequence of the possibility to reduce its device dimensionally by a cheap and easy technique. In fact, electrochemical etching of Si under controlled conditions leads to the formation of nanocrystalline porous silicon (PS) where quantum confinement of photo excited carriers and surface species yield to a band gap opening and an increased radiative transition rate resulting in efficient light emission. In the present study, the nanostructured PS samples were prepared using anodic etching of p-type silicon. The effect of current density on structural and optical properties of PS, has been investigated. XRD studies confirm the presence of silicon nanocrystallites in the PS structure. By increasing the current density, the average estimated values of grain size are found to be decreased. SEM images indicate that the pores are surrounded by a thick columnar network of silicon walls. The observed PL spectra at room temperature for all the current densities confirm the formation of PS structures with nanocrystalline features. PL studies reveal that there is a prominent visible emission peak at 606 nm. The obtained variation of intensity in PL emission may be used for intensity varied light emitting diode applications. These studies confirm that the PS is a versatile material with potential for optoelectronics application.


2014 ◽  
Vol 93 ◽  
pp. 264-269 ◽  
Author(s):  
Henryk Teisseyre ◽  
Michal Bockowski ◽  
Toby David Young ◽  
Szymon Grzanka ◽  
Yaroslav Zhydachevskii ◽  
...  

In this communication, the use of gallium nitride doped with beryllium as an efficient converter for white light emitting diode is proposed. Until now beryllium in this material was mostly studied as a potential p-type dopant. Unfortunately, the realization of p-type conductivity in such a way seems impossible. However, due to a very intensive yellow emission, bulk crystals doped with beryllium can be used as light converters. In this communication, it is demonstrated that realisation of such diode is possible and realisation of a colour rendering index is close to that necessary for white light emission.


RSC Advances ◽  
2014 ◽  
Vol 4 (39) ◽  
pp. 20358-20363 ◽  
Author(s):  
Ping Yang ◽  
Hsueh-Shin Chen ◽  
Junpeng Wang ◽  
Quande Che ◽  
Qian Ma ◽  
...  

A sol–gel silica film was fabricated by a spraying approach on various substrates with a 3-dimensional surface for white LEDs.


Sign in / Sign up

Export Citation Format

Share Document