Investigation on moisture management properties of knitted fabrics produced from vortex-spun yarns

2019 ◽  
Vol 111 (4) ◽  
pp. 565-574
Author(s):  
Seval Uyanık ◽  
Pınar Duru Baykal
Keyword(s):  
Knitted Fabrics ◽  
Moisture Management ◽  
Spun Yarns

Electrospun nanofiber/cotton composite yarn with enhanced moisture management ability

2021 ◽  
pp. 004051752098497
Author(s):  
Ning Mao ◽  
Xiaohong Qin ◽  
Liming Wang ◽  
Jianyong Yu
Keyword(s):  
Water Transport ◽  
Moisture Absorption ◽  
Water Evaporation ◽  
Electrospun Fibers ◽  
Electrospun Nanofiber ◽  
Knitted Fabrics ◽  
Moisture Management ◽  
Composite Yarn ◽  
Management Ability ◽  
Cotton Yarns

Wet comfort is a critical performance for fabrics, especially when human bodies release sweat in daily life. Despite excellent moisture absorption performance, cotton yarns are still limited in the moisture release/transfer ability. Here, based on a novel electrospinning technology, polyacrylonitrile and polystyrene (PS) electrospun nanofiber/cotton composite yarns were produced, respectively. Under fluorescence microscopic observation, electrospun fibers within the composite yarns showed a uniform distribution. As a result, these composite yarn-based knitted fabrics obtained a good water transport ability and a fast water evaporation rate. According to the moisture management test, PS electrospun nanofiber composite yarn-based fabrics exhibited a relatively high one-way transport index R (400%), claiming an enhanced moisture management performance. Finally, specific surface area tests and finite element analyses were used to analyze the water transport mechanism inside the yarns. The results proved that a small number of electrospun fibers played a predominant role in enhancing the moisture management ability of the composite yarns.

Effects of Laundering on Moisture Management and Air Permeability of Different Chitosan Treated Nylon 6,6 Elastane Fabrics Using EDTA and Triton X-100

2021 ◽  
Vol 58 (2) ◽  
pp. 97-105
Author(s):  
Nilüfer Yıldız Varan ◽  
Yavuz Çaydamlı
Keyword(s):  
Photoelectron Spectroscopy ◽  
Ethylenediaminetetraacetic Acid ◽  
Lower Layer ◽  
Air Permeability ◽  
Complexing Agent ◽  
Three Solutions ◽  
Knitted Fabrics ◽  
Moisture Management ◽  
Nylon 6,6 ◽  
Triton X

Abstract This study investigates the effect of washing fabrics (nylon 6.6 powernet knitted fabrics with 30% spandex) treated with chitosan on their moisture management and air permeability. The knitted fabrics were treated with three different solutions of chitosan and dimethylol dihydroxyethylene urea (DMDHEU); in addition to chitosan and DMDHEU, one solution contained the complexing agent ethylenediaminetetraacetic acid (EDTA) and the other contained the nonionic surfactant and penetration agent octylphenol ethoxylate. The three solutions were compared in terms of their effect on moisture management and air permeability properties. Nylon fabrics treated and washed with these solutions were characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Nylon fabrics treated with chitosan and DMDHEU showed the potential to transfer liquid moisture to the lower layer and keep the layer next to the skin dry after 20 washes.

Comfort properties of bamboo/cotton blended knitted fabrics produced from rotor spun yarns

2015 ◽  
Vol 106 (12) ◽  
pp. 1371-1376 ◽  
Author(s):  
G. Ramakrishnan ◽  
P. Umapathy ◽  
C. Prakash
Keyword(s):  
Knitted Fabrics ◽  
Spun Yarns

Development of tri-layer knitted fabrics for shuttle badminton players

2017 ◽  
Vol 48 (4) ◽  
pp. 738-760 ◽  
Author(s):  
T Suganthi ◽  
P Senthilkumar
Keyword(s):  
Thermal Comfort ◽  
Outer Layer ◽  
Thermal Environment ◽  
Middle Layer ◽  
Objective Evaluation ◽  
Knitted Fabrics ◽  
Vapour Permeability ◽  
Moisture Management ◽  
Insensible Perspiration ◽  
Knitted Structure

Thermo-physiological comfort of the fabric is attained through the ability of managing heat and transmission of sensible and insensible perspiration. An investigation on influence of tri-layer knitted structure on thermal comfort characteristics of layered knitted fabrics was carried out. Three tri-layer knitted structures were developed in which inner layer was made up of micro-fibre polyester and outer layer was made up of modal yarn. The yarn used in the middle layer was changed to either micro-fibre polyester or polyester or acrylic yarn. The thermal comfort characteristics such as thermal conductivity, air permeability, water vapour permeability, wicking, moisture absorbency, drying rate and moisture management properties have been analysed. Wear trial was conducted for shuttle badminton players and they were ranked using thermal environment subjective judgement scale. Tri-layer knitted structure with micro-fibre polyester in the inner and middle layer and modal in the outer layer showed better thermal comfort characteristics both by objective evaluation and wear trial method compared to polyester or acrylic in the middle layer and is preferable for shuttle badminton sportswear.

Effect of Pique and Honeycomb Structures on Moisture Management Properties of Eri Silk Knitted Fabrics

2019 ◽  
Vol 17 (8) ◽  
pp. 1130-1139 ◽  
Author(s):  
B. Senthil Kumar ◽  
M. Ramesh Kumar ◽  
M. Parthiban ◽  
T. Ramachandran
Keyword(s):  
Knitted Fabrics ◽  
Honeycomb Structures ◽  
Moisture Management ◽  
Eri Silk

Evaluation of thermal and moisture management properties on knitted fabrics and comparison with a physiological model in warm conditions

2011 ◽  
Vol 42 (6) ◽  
pp. 792-800 ◽  
Author(s):  
Gauthier Bedek ◽  
Fabien Salaün ◽  
Zuzana Martinkovska ◽  
Eric Devaux ◽  
Daniel Dupont
Keyword(s):  
Physiological Model ◽  
Knitted Fabrics ◽  
Moisture Management

scholarly journals Characterization of functional single jersey knitted fabrics using non-conventional yarns for sportswear

2016 ◽  
Vol 88 (3) ◽  
pp. 275-292 ◽  
Author(s):  
Jefferson M Souza ◽  
Sandra Sampaio ◽  
Welter C Silva ◽  
Sidney G de Lima ◽  
Andrea Zille ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Water Vapor Permeability ◽  
Thermal Control ◽  
Vapor Permeability ◽  
Knitted Fabrics ◽  
Moisture Management ◽  
Antimicrobial Efficiency ◽  
Technical Textiles ◽  
Single Jersey

Eight functional single jersey plain knitted fabrics have been developed in order to assess a quantitative analysis of various comfort-related properties in terms of thermal control, air and water vapor permeability, wickability, coefficient of kinetic friction and antimicrobial efficiency, using eight different commercially available functional yarns: Polyester Craque® and viscose Craque® conventional yarns as controls; Finecool® and Coolmax® polyester yarns for moisture management and quick drying; Holofiber® polyester yarns containing an optical responsive material that the producer claims to improve body oxygenation; Airclo® polyester hollow yarns for efficient control of body temperature; and, finally, polyester Trevira® and viscose Seacell® for antimicrobial activity. According to the results, Coolmax® for moisture management, Airclo® for thermal control and Seacell® for antimicrobial activity present the best performances as technical textiles for sportswear for the respective specific functional property.

scholarly journals The Efficiency of Non-Flammable Functional Underwear

2014 ◽  
Vol 14 (3) ◽  
pp. 174-178 ◽  
Author(s):  
Viera Glombikova ◽  
Petra Komarkova
Keyword(s):  
Thermal Resistance ◽  
Moisture Transport ◽  
Protective Clothing ◽  
Air Permeability ◽  
Extreme Conditions ◽  
Flame Resistance ◽  
Knitted Fabrics ◽  
Vapour Permeability ◽  
Moisture Management ◽  
Physiological Properties

Abstract This study evaluates the efficiency of non-flammable functional underwear used as a secondary heat barrier in extreme conditions. Five groups of knitted fabrics were analysed for flame resistance and selected physiological properties (water vapour permeability, air permeability, thermal resistance and liquid moisture transport by moisture management transport). The results indicated similar levels of flame resistance for the materials tested but show important differences in terms of physiological characteristics, namely liquid moisture transport, which influences the safety and comfort of protective clothing.

Analysis of thermal comfort characteristics of moisture management finished knitted fabrics made from different yarns

2011 ◽  
Vol 42 (1) ◽  
pp. 19-33 ◽  
Author(s):  
MB Sampath ◽  
Anton Aruputharaj ◽  
Mani Senthilkumar ◽  
G Nalankilli
Keyword(s):  
Thermal Comfort ◽  
Knitted Fabrics ◽  
Moisture Management
Sign in / Sign up

Export Citation Format

Share Document