scholarly journals Analysis of the structure of intramembrane particles of the mammalian urinary bladder.

1980 ◽  
Vol 86 (2) ◽  
pp. 514-528 ◽  
Author(s):  
J D Robertson ◽  
J Vergara
Keyword(s):  
Urinary Bladder ◽  
Glass Surface ◽  
Hexagonal Lattice ◽  
Freeze Fracture ◽  
Transitional Epithelium ◽  
Thin Sections ◽  
Intramembrane Particles ◽  
Thin Sectioning ◽  
Space Constant ◽  
Dominant Structure

The luminal and discoid vacuole membranes of the superficial cell layer of the transitional epithelium of the mammalian urinary bladder have been studied by thin-sectioning and freeze-fracture-etch (FFE) electron microscope methods. For the FFE studies membranes were deposited on a cationized glass surface, covered by a thin copper disc, and fractured under liquid N2. Specimens were etched at -100 degrees C and replicated at -190 degrees C. A model of the lattice membrane derived from thin sections was used to predict the heights of the fracture faces above the glass surface. A hexagonal pattern of globular intramembrane particles spaced 160 A apart was seen in the external fracture (EF) face plaques as previously described and regarded as the dominant structure. However, very extensive areas of another pattern, seen before in only limited areas, have beeen found in the EF faces. The pattern consists of a smooth hexagonal lattice with the same space constant as the globular one but a different structure. By image analysis it consists of overlapping domains bordered by shared but incomplete metal rims. Each domain has a central spot of metal encircled by a shadow. The surface of the smooth lattice is partly complementary to the corresponding protoplasmic fracture (PF) face which shows a similar hexagonal lattice with the same space constant. The height of the smooth EF lattice above the glass substrate is the same as the plane of the center of the lipid bilayer predicted by the model. The mean heights of the particles of the globular EF lattice are greater than the total thickness of the membrane as predicted by the model and confirmed by measurements. The globular EF lattice is not complementary and it is concluded that the globular particles do not exist in the native membrane but arise artifactually during the preparatory procedures.

Regular structures in membranes: the lumenal plasma membrane of the cow urinary bladder

1976 ◽  
Vol 22 (2) ◽  
pp. 355-370 ◽  
Author(s):  
S. Knutton ◽  
J.D. Robertson
Keyword(s):  
Plasma Membrane ◽  
Urinary Bladder ◽  
Cytoplasmic Membrane ◽  
Membrane Surface ◽  
Hexagonal Lattice ◽  
Freeze Fracture ◽  
Hexagonal Structure ◽  
Unit Cell ◽  
Hexagonal Array ◽  
Thin Sections

The ultrastructure of the lumenal plasma membrane of the cow urianry bladder has been studied in thin sections of glutaraldehyde- and glutaraldehyde-H2O2-fixed specimens, by negative staining and freeze fracture. A regular hexagonal array of particles confined to polygonal plaques 0-1-0-4-mum in diameter and separated by 0-02-mum interplaque areas is revealed by all 3 techniques. Cross-sections through particulate areas fixed with glutarayldehyde-H2O2 display a tetralaminar structure consisting of the usual approximately 8-nm-thick trilamellar unit membrane structure, on the external dense leaflet of which is located an additional approximately 4-nm-thick stratum which is occasionally resolved into a row of regulrly spaced approximately 4-nm-diameter particles. Non-particulate areas feature only the approximately 8-nm-thick trilamellar structure. Tangential sections reveal an hexagonal array of particles with a unit cell of approximately 16 nm. Four membrane faces can be revealed by freeze fracture and etching of membranes of the cow urinary bladder; 2 complementary split inner membrane faces (A and B) revealed by the cleaving process and the lumenal and cytoplasmic membrane surfaces exposed by etching. Face B, which belongs to the external membrane leaflet and faces the cytoplasm, displays plaques of particles arranged in a hexagonal lattice with a unit cell of approximately 16 nm. Face A, which belongs to the cytoplasmic membrane leaflet and faces the lumen, displays a complementary array of hexagonally packed pits. The hexagonally arranged particles also protrude into the lumenal membrane surface where they can occasionally be resolved into 6 approximately 5-nm-diameter subunits; the cytoplasmic surface appears smooth. Six approximately 5-nm-diameter subunits are also revealed in negatively stained preparations. The data are consistent with a model for the membrane in which the particles forming the hexagonal structure protrude above the lumenal membrane surface and also bridge most of the thickness of the membrane.

scholarly journals Subunit structure of junctional feet in triads of skeletal muscle: a freeze-drying, rotary-shadowing study.

1984 ◽  
Vol 99 (5) ◽  
pp. 1735-1742 ◽  
Author(s):  
D G Ferguson ◽  
H W Schwartz ◽  
C Franzini-Armstrong
Keyword(s):  
Three Dimensional ◽  
Freeze Fracture ◽  
Subunit Structure ◽  
Thin Sections ◽  
Large Structures ◽  
Foot Structure ◽  
Freeze Dried ◽  
Thin Sectioning ◽  
En Face ◽  
A Subunit

Isolated heavy sarcoplasmic reticulum vesicles retain junctional specializations (feet) on their outer surface. We have obtained en face three-dimensional views of the feet by shadowing and replicating the surfaces of freeze-dried isolated vesicles. Feet are clearly visible as large structures located on raised platforms. New details of foot structure include a four subunit structure and the fact that adjacent feet do not abut directly corner to corner but are offset by half a subunit. Feet aligned within rows were observed to be rotated at a slight angle off the long axis of the row creating a center-to-center spacing (32.5 nm) slightly less than the average diagonal of the feet (35.3 nm). Comparison with previous information from thin sections and freeze-fracture showed that this approach to the study of membranes faithfully preserves structure and allows better visualization of surface details than either thin-sectioning or negative-staining.

scholarly journals Freeze-fracture study on the erythrocyte membrane during malarial parasite invasion.

1981 ◽  
Vol 91 (1) ◽  
pp. 55-62 ◽  
Author(s):  
M Aikawa ◽  
L H Miller ◽  
J R Rabbege ◽  
N Epstein
Keyword(s):  
Erythrocyte Membrane ◽  
Cytochalasin B ◽  
Freeze Fracture ◽  
Malarial Parasite ◽  
Invasion Process ◽  
Parasite Invasion ◽  
Thin Sections ◽  
Intramembrane Particles ◽  
Fracture Study ◽  
Attachment Process

Invasion of erythrocytes by malarial merozoites requires the formation of a junction between the merozoite and the erythrocyte. Migration of the junction parallel to the long axis of the merozoite occurs during the entry of the merozoite into an invagination of the erythrocyte. Freeze-fracture shows a narrow circumferential band of rhomboidally arrayed particles on the P face of the erythrocyte membrane at the neck of the erythrocyte invagination and matching rhomboidally arrayed pits on the E face. The band corresponds to the junction between the erythrocyte and merozoite membranes observed in thin sections and may represent the anchorage sites of the contractile proteins within the erythrocyte. Intramembrane particles (IMP) on the P face of the erythrocyte membrane disappear beyond this junction. When the erythrocytes and cytochalasin B-treated merozoites are incubated together, the merozoite attaches to the erythrocyte membrane and a junction is formed between the two, but the invasion process does not advance further and no movement of the junction occurs. Although there is no entry of the parasite, the erythrocyte membrane still invaginates. Freeze-fracture shows that the P face of the invaginated erythrocyte membrane is almost devoid of the IMP that are found elsewhere on the membrane, suggesting that the attachment process in and of itself is sufficient to create a relatively IMP-free bilayer.

scholarly journals Low resistance junctions in crayfish. Structural changes with functional uncoupling.

1976 ◽  
Vol 70 (2) ◽  
pp. 419-439 ◽  
Author(s):  
C Peracchia ◽  
A F Dulhunty
Keyword(s):  
Gap Junctions ◽  
Conformational Changes ◽  
Structural Changes ◽  
Freeze Fracture ◽  
Particle Diameter ◽  
Electrical Measurements ◽  
Thin Sections ◽  
Giant Axons ◽  
Intramembrane Particles ◽  
Center Distance

Electrical uncoupling of crayfish septate lateral giant axons is paralleled by structural changes in the gap junctions. The changes are characterized by a tighter aggregation of the intramembrane particles and a decrease in the overall width of the junction and the thickness of the gap. Preliminary measurements indicate also a decrease in particle diameter. The uncoupling is produced by in vitro treatment of crayfish abdominal cords either with a Ca++, Mg++-free solution containing EDTA, followed by return to normal saline (Van Harreveld's solution), or with VAn Harreveld's solution containing dinitrophenol (DNP). The uncoupling is monitored by the intracellular recording of the electrical resistance at a septum between lateral giant axons. The junctions of the same septum are examined in thin sections; those of other ganglia of the same chain used for the electrical measurements are studied by freeze-fracture. In controls, most junctions contain a more or less regular array of particles repeating at a center to center distance of approximately 200 A. The overall width of the junctions is approximately 200 A and the gap thickness is 40-50 A. Vesicles (400-700 A in diameter) are closely apposed to the junctional membranes. In uncoupled axons, most junctions contain a hexagonal array of particles repeating at a center to center distance of 150-155 A. The overall width of the junctions is approximately 180 A and the gap thickness is 20-30 A. These junctions are usually curved and are rarely associated with vesicles. Isolated, PTA-stained junctions, also believed to be uncoupled, display similar structural features. There are reasons to believe that the changes in structure and permeability are triggered by an increase in the intracellular free Ca++ concentration. Most likely, the changes in permeability are caused by conformational changes in some components of the intramembrane particles at the gap junctions.

scholarly journals Evidence that ADH-stimulated intramembrane particle aggregates are transferred from cytoplasmic to luminal membranes in toad bladder epithelial cells.

1980 ◽  
Vol 85 (1) ◽  
pp. 83-95 ◽  
Author(s):  
J Muller ◽  
W A Kachadorian ◽  
V A DiScala
Keyword(s):  
Urinary Bladder ◽  
Freeze Fracture ◽  
Toad Urinary Bladder ◽  
Granular Cells ◽  
Thin Sections ◽  
Intramembrane Particle ◽  
Luminal Membrane ◽  
Particle Aggregates ◽  
Cytoplasmic Structures ◽  
Induced Changes

In freeze-fracture (FF) preparations of ADH-stimulated toad urinary bladder, characteristic intramembrane particle (IMP) aggregates are seen on the protoplasmic (P) face of the luminal membrane of granular cells while complementary parallel grooves are found on the exoplasmic (E) face. These IMP aggregates specifically correlate with ADH-induced changes in water permeability. Tubular cytoplasmic structures whose membranes contain IMP aggregates which look identical to the IMP aggregates in the luminal membrane have also been described in granular cells from unstimulated and ADH-stimulated bladders. The diameter of these cytoplasmic structures (0.11 +/- 0.004 micrometers) corresponds to that of tubular invaginations of the luminal membrane seen in thin sections of ADH-treated bladders (0.13 +/- 0.005 micrometers). Continuity between the membranes of these cytoplasmic structures (which are not granules) and the luminal membrane has been directly observed in favorable cross-fractures. In FF preparations of the luminal membrane, these apparent fusion events are seen as round, ice-filled invaginations (0.13 +/- 0.01 micrometer Diam), of which about half have the characteristic ADH-associated aggregates near the point of membrane fusion. They are less numerous than, but linearly related to, the number of aggregates counted in the same preparations (n = 78, r = 0.71, P less than 0.01). These observations suggest that the IMP aggregates seen in luminal membrane after ADH stimulation are transferred preformed by fusion of cytoplasmic with luminal membrane.

scholarly journals Ultrastructure of Na,K-transport vesicles reconstituted with purified renal Na,K-ATPase.

1980 ◽  
Vol 86 (3) ◽  
pp. 746-754 ◽  
Author(s):  
E Skriver ◽  
A B Maunsbach ◽  
P L Jørgensen
Keyword(s):  
Electron Microscopy ◽  
Freeze Fracture ◽  
Cation Transport ◽  
Coupled Transport ◽  
Vesicle Membrane ◽  
Thin Sections ◽  
Intramembrane Particles ◽  
Freeze Fracture Electron Microscopy ◽  
Fracture Electron ◽  
K Transport

To study the size and structure of the Na,K-pump molecule, the ultrastructure of phospholipid vesicles was examined after incorporation of purified Na,K-ATPase which catalyzes active coupled transport of Na+ and K+ in a ratio close to 3Na/2K. The vesicles were analyzed by thin sectioning and freeze-fracture electron microscopy after reconstitution with different ratios of Na,K-ATPase protein to lipid, and the ultrastructural observations were correlated to the cation transport capacity. The purified Na,K-ATPase reconstituted with phospholipids to form a very uniform population of vesicles. Thin sections of preparations fixed with glutaraldehyde and osmium tetroxide showed vesicles limited by a single membrane which in samples stained with tannic acid appeared triple-layered with a thickness of 70 A. Also, freeze-fracture electron microscopy demonstrated uniform vesicles with diameters in the range of 700-1,100 A and an average value close to 900 A. The vesicle diameter was independent of the amount of protein used for reconstitution. Intramembrane particles appeared only in the vesicle membrane after introduction of Na,K-ATPase and the frequency of intramembrane particles was proportional to the amount of Na,K-ATPase protein used in the reconstitution. The particles were evenly distributed on the inner and the outer leaflet of the vesicle membrane. The diameter of the particles was 90 A and similar to our previous values for the diameter of intramembrane particles in the purified Na,K-ATPase. The capacity for active cation transport in the reconstituted vesicles was proportional to the frequency of intramembrane particles over a range of 0.2-16 particles per vesicle. The data therefore show that active coupled Na,K transport can be carried out by units of Na,K-ATPase which appear as single intramembrane particles with diameters close fo 90 A in the freeze-fracture micrographs.

Heterogeneity of Size and Distribution of Intramembrane Particles in the Plasma Membrane of Yeast

1977 ◽  
Vol 35 ◽  
pp. 596-597
Author(s):  
E. Keyhani
Keyword(s):  
Plasma Membrane ◽  
Candida Utilis ◽  
Synthetic Medium ◽  
Freeze Fracture ◽  
Translational Diffusion ◽  
Yeast Cells ◽  
Distilled Water ◽  
Intramembrane Particles ◽  
The Matrix ◽  
Water Cell

The matrix of biological membranes consists of a lipid bilayer into which proteins or protein aggregates are intercalated. Freeze-fracture techni- ques permit these proteins, perhaps in association with lipids, to be visualized in the hydrophobic regions of the membrane. Thus, numerous intramembrane particles (IMP) have been found on the fracture faces of membranes from a wide variety of cells (1-3). A recognized property of IMP is their tendency to form aggregates in response to changes in experi- mental conditions (4,5), perhaps as a result of translational diffusion through the viscous plane of the membrane. The purpose of this communica- tion is to describe the distribution and size of IMP in the plasma membrane of yeast (Candida utilis).Yeast cells (ATCC 8205) were grown in synthetic medium (6), and then harvested after 16 hours of culture, and washed twice in distilled water. Cell pellets were suspended in growth medium supplemented with 30% glycerol and incubated for 30 minutes at 0°C, centrifuged, and prepared for freeze-fracture, as described earlier (2,3).

Lead aspartate: a new en bloc stain for electron microscopy

1978 ◽  
Vol 36 (2) ◽  
pp. 34-35
Author(s):  
J.R. Walton
Keyword(s):  
Electron Microscopy ◽  
Calcium Ion ◽  
Enzyme Reaction ◽  
Lead Citrate ◽  
Reaction Products ◽  
En Bloc ◽  
Thin Sections ◽  
Lead Salts ◽  
Thin Sectioning ◽  
High Alkalinity

In electron microscopy, lead is the metal most widely used for enhancing specimen contrast. Lead citrate requires a pH of 12 to stain thin sections of epoxy-embedded material rapidly and intensively. However, this high alkalinity tends to leach out enzyme reaction products, making lead citrate unsuitable for many cytochemical studies. Substitution of the chelator aspartate for citrate allows staining to be carried out at pH 6 or 7 without apparent effect on cytochemical products. Moreover, due to the low, controlled level of free lead ions, contamination-free staining can be carried out en bloc, prior to dehydration and embedding. En bloc use of lead aspartate permits the grid-staining step to be bypassed, allowing samples to be examined immediately after thin-sectioning.Procedures. To prevent precipitation of lead salts, double- or glass-distilled H20 used in the stain and rinses should be boiled to drive off carbon dioxide and glassware should be carefully rinsed to remove any persisting traces of calcium ion.

Ferritin Labeled Antibody Staining of Thin Sections

1969 ◽  
Vol 27 ◽  
pp. 420-421
Author(s):  
J. D. McLean ◽  
S. J. Singer
Keyword(s):  
Biological Material ◽  
Water Soluble ◽  
Thin Sections ◽  
Antibody Staining ◽  
Thin Sectioning ◽  
Ultrathin Sections

The successful application of ferritin labeled antibodies (F-A) to ultrathin sections of biological material has been hampered by two main difficulties. Firstly the normally used procedures for the preparation of material for thin sectioning often result in a loss of antigenicity. Secondly the polymers employed for embedding may non-specifically absorb the F-A. Our earlier use of cross-linked polyampholytes as embedding media partially overcame these problems. However the water-soluble monomers used for this method still extract many lipids from the material.

Image Analysis of Intramembrane Particles in Freeze-Fractured Biomembranes Using Computer Simulation Techniques

1975 ◽  
Vol 33 ◽  
pp. 214-215
Author(s):  
D.J. Benefiel ◽  
R.S. Weinstein
Keyword(s):  
Membrane Proteins ◽  
Freeze Fracture ◽  
Integral Membrane Proteins ◽  
Systematic Evaluation ◽  
Intramembrane Particles ◽  
Modeling Methods ◽  
Simulation Techniques ◽  
Freeze Fracture Electron Microscopy ◽  
Fracture Electron ◽  
Computer Simulation Techniques

Intramembrane particles (IMP or MAP) are components of most biomembranes. They are visualized by freeze-fracture electron microscopy, and they probably represent replicas of integral membrane proteins. The presence of MAP in biomembranes has been extensively investigated but their detailed ultrastructure has been largely ignored. In this study, we have attempted to lay groundwork for a systematic evaluation of MAP ultrastructure. Using mathematical modeling methods, we have simulated the electron optical appearances of idealized globular proteins as they might be expected to appear in replicas under defined conditions. By comparing these images with the apearances of MAPs in replicas, we have attempted to evaluate dimensional and shape distortions that may be introduced by the freeze-fracture technique and further to deduce the actual shapes of integral membrane proteins from their freezefracture images.

Sign in / Sign up

Export Citation Format

Share Document