Fracture behavior analysis of EuBaCuO superconducting ring bulk reinforced by a stainless steel ring during field-cooled magnetization

2017 ◽  
Vol 30 (11) ◽  
pp. 115006 ◽  
Author(s):  
K Takahashi ◽  
H Fujishiro ◽  
T Naito ◽  
Y Yanagi ◽  
Y Itoh ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Behavior Analysis ◽  
Fracture Behavior ◽  
Superconducting Ring ◽  
Stainless Steel Ring

scholarly journals Contrasting the Role of Pores on the Stress State Dependent Fracture Behavior of Additively Manufactured Low and High Ductility Metals

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3657
Author(s):  
Alexander E. Wilson-Heid ◽  
Erik T. Furton ◽  
Allison M. Beese
Keyword(s):  
Stainless Steel ◽  
Stress State ◽  
Pore Size ◽  
Fracture Behavior ◽  
316L Stainless Steel ◽  
Equivalent Stress ◽  
Failure Behavior ◽  
High Ductility ◽  
State Dependent ◽  
Fracture Models

This study investigates the disparate impact of internal pores on the fracture behavior of two metal alloys fabricated via laser powder bed fusion (L-PBF) additive manufacturing (AM)—316L stainless steel and Ti-6Al-4V. Data from mechanical tests over a range of stress states for dense samples and those with intentionally introduced penny-shaped pores of various diameters were used to contrast the combined impact of pore size and stress state on the fracture behavior of these two materials. The fracture data were used to calibrate and compare multiple fracture models (Mohr-Coulomb, Hosford-Coulomb, and maximum stress criteria), with results compared in equivalent stress (versus stress triaxiality and Lode angle) space, as well as in their conversions to equivalent strain space. For L-PBF 316L, the strain-based fracture models captured the stress state dependent failure behavior up to the largest pore size studied (2400 µm diameter, 16% cross-sectional area of gauge region), while for L-PBF Ti-6Al-4V, the stress-based fracture models better captured the change in failure behavior with pore size up to the largest pore size studied. This difference can be attributed to the relatively high ductility of 316L stainless steel, for which all samples underwent significant plastic deformation prior to failure, contrasted with the relatively low ductility of Ti-6Al-4V, for which, with increasing pore size, the displacement to failure was dominated by elastic deformation.

Explosively Driven Expansion and Fragmentation Behavior for Cylinders, Spheres and Rings of 304 Stainless Steel

2010 ◽  
Vol 638-642 ◽  
pp. 1035-1040 ◽  
Author(s):  
Tetsuyuki Hiroe ◽  
Kazuhito Fujiwara ◽  
Hidehiro Hata ◽  
Mitsuru Yamauchi ◽  
Kiyotaka Tsutsumi ◽  
...  
Keyword(s):  
Stainless Steel ◽  
High Speed ◽  
Fracture Behavior ◽  
Copper Wire ◽  
304 Stainless Steel ◽  
Fragmentation Model ◽  
Fragmentation Behavior ◽  
Deformation And Fracture ◽  
Test Parameters ◽  
Fine Copper

Explosive loading techniques are applied to expand tubular cylinders, spherical shells and rings of 304 stainless steel to fragmentation, and the effects of wall thicknesses, explosive driver diameters and the constant proportionality of the in-plane biaxial stretching rates are investigated on the deformation and fracture behavior of three basic structures experimentally and numerically. In the cylinder tests, the driver is a column of high explosive PETN, inserted coaxially into the bore of a cylinder and initiated by exploding a fine wire bundle at the column axis using a discharge current from a high-voltage capacitor bank. In case of the ring tests, ring specimens are placed onto a single cylinder filled with the PETN as a expansion driver, and for sphere tests, specimens filled with the PETN are also initiated by exploding a fine copper wire line with small length located at the central point. Two types of experiments are conducted for every specimen and test condition. The first type uses high speed cameras to observe the deformation and crack generation of expanding specimens showing the final maximum in-plane stretching rate of above , and the second uses soft capturing system recovering typically most fragments successfully. The fragments are measured and investigated using a fragmentation model. The effects of test parameters on the deformation and fracture behavior for three types of structures are discussed in need of modified fragmentation model for shell structural elements.

Fracture Behavior of Stainless Steel

2009 ◽  
pp. 553-553-25 ◽  
Author(s):  
WH Bamford ◽  
AJ Bush
Keyword(s):  
Stainless Steel ◽  
Fracture Behavior
Sign in / Sign up

Export Citation Format

Share Document