Optimized dithering technique in frequency domain for high-quality three-dimensional depth data acquisition

2019 ◽  
Vol 28 (8) ◽  
pp. 084202
Author(s):  
Ning Cai ◽  
Zhe-Bo Chen ◽  
Xiang-Qun Cao ◽  
Bin Lin
Keyword(s):  
Data Acquisition ◽  
Frequency Domain ◽  
Three Dimensional ◽  
High Quality ◽  
Depth Data

An experience of elaboration and implementation of systems of slag-forming mixtures mechanized feeding into CCM moulds

2020 ◽  
Vol 76 (10) ◽  
pp. 994-1003
Author(s):  
S. P. Eron’ko ◽  
M. Yu. Tkachev ◽  
E. V. Oshovskaya ◽  
B. I. Starodubtsev ◽  
S. V. Mechik
Keyword(s):  
Economic Effect ◽  
Three Dimensional ◽  
Movable Part ◽  
High Quality ◽  
Working Zone ◽  
Fine Material ◽  
Mixing Chamber ◽  
Field Samples ◽  
Technical Solutions ◽  
Feeding Systems

Effective application of slag-forming mixtures (SFM), being fed into continuous castingg machine (CCM) moulds, depends on their even distribution on the melt surface. Manual feeding of the SFM which is widely usedd does not provide this condition, resulting in the necessity to actualize the work to elaborate systems of SFM mechanized feedingg into moulds of various types CCM. A concept of the designing of a system of SFM feeding into CCM moulds presented with the ratte strictly correspondent to the casting speed and providing formation of an even layer of fine material of given thickness on the whoole surface of liquid steel. The proposed methods of designing of the SFM mechanized feeding systems based on three-dimensional computer simulation with the subsequent verification of the correctness of the adopted technical solutions on field samples. Informattion is presented on the design features of the adjusted facilities intended for continuous supply of finely granulated and powder mixtuures on metal mirror in moulds at the production of high-quality billets, blooms and slabs. Variants of mechanical and pneumo-mechaanical SFM supply elaborated. At the mechanical supply the fine material from the feeding hopper is moved at a adjusted distance bby a rigid horizontally located screw. At the pneumo-mechanical supply the metered doze of the granular mixture is delivered by a sshort vertical screw, the lower part of which is located in the mixing chamber attached from below to the hopper and equipped with ann ejector serving for pneumatic supply of the SFM in a stream of transporting gas. It was proposed to use flexible spiral screws in the ffuture facilities of mechanical SFM feeding. It will enable to eliminate the restrictions stipulated by the lack of free surface for locatiion of the facility in the working zone of the tundish, as well as to decrease significantly the mass of its movable part and to decreaase the necessary power of the carriage moving mechanism driver. The novelty of the proposed technical solutions is protected by thhree patents. The reduction of 10–15% in the consumption of slag-forming mixtures during the transition from manual to mechanizeed feeding confirmed. The resulting economic effect from the implementation of technical development enables to recoup the costs inncurred within 8–10 months.

scholarly journals Generation and Annotation of Simulation-Real Ship Images for Convolutional Neural Networks Training and Testing

2021 ◽  
Vol 11 (13) ◽  
pp. 5931
Author(s):  
Ji’an You ◽  
Zhaozheng Hu ◽  
Chao Peng ◽  
Zhiqiang Wang
Keyword(s):  
Neural Networks ◽  
Convolutional Neural Networks ◽  
Image Annotation ◽  
Three Dimensional ◽  
Image Data ◽  
Detection Algorithm ◽  
Simulation Software ◽  
High Quality ◽  
Annotation Method ◽  
Detection Of Objects

Large amounts of high-quality image data are the basis and premise of the high accuracy detection of objects in the field of convolutional neural networks (CNN). It is challenging to collect various high-quality ship image data based on the marine environment. A novel method based on CNN is proposed to generate a large number of high-quality ship images to address this. We obtained ship images with different perspectives and different sizes by adjusting the ships’ postures and sizes in three-dimensional (3D) simulation software, then 3D ship data were transformed into 2D ship image according to the principle of pinhole imaging. We selected specific experimental scenes as background images, and the target ships of the 2D ship images were superimposed onto the background images to generate “Simulation–Real” ship images (named SRS images hereafter). Additionally, an image annotation method based on SRS images was designed. Finally, the target detection algorithm based on CNN was used to train and test the generated SRS images. The proposed method is suitable for generating a large number of high-quality ship image samples and annotation data of corresponding ship images quickly to significantly improve the accuracy of ship detection. The annotation method proposed is superior to the annotation methods that label images with the image annotation software of Label-me and Label-img in terms of labeling the SRS images.

scholarly journals The fossil record of whip spiders: the past of Amblypygi

PalZ ◽  
2021 ◽  
Author(s):  
Carolin Haug ◽  
Joachim T. Haug
Keyword(s):  
Fossil Record ◽  
3D Imaging ◽  
Three Dimensional ◽  
Dorsal Shield ◽  
Stereo Images ◽  
Geological Time ◽  
High Quality ◽  
The Past ◽  
Over Time

AbstractWhip spiders (Amblypygi), as their name suggests, resemble spiders (Araneae) in some aspects, but differ from them by their heart-shaped (prosomal) dorsal shield, their prominent grasping pedipalps, and their subsequent elongate pair of feeler appendages. The oldest possible occurrences of whip spiders, represented by cuticle fragments, date back to the Devonian (c. 385 mya), but (almost) complete fossils are known from the Carboniferous (c. 300 mya) onwards. The fossils include specimens preserved on slabs or in nodules (Carboniferous, Cretaceous) as well as specimens preserved in amber (Cretaceous, Eocene, Miocene). We review here all fossil whip spider specimens, figure most of them as interpretative drawings or with high-quality photographs including 3D imaging (stereo images) to make the three-dimensional relief of the specimens visible. Furthermore, we amend the list by two new specimens (resulting in 37 in total). The fossil specimens as well as modern whip spiders were measured to analyse possible changes in morphology over time. In general, the shield appears to have become relatively broader and the pedipalps and walking appendages have become more elongate over geological time. The morphological details are discussed in an evolutionary framework and in comparison with results from earlier studies.

THE VISIBLE ANIMAL PROJECT: A THREE-DIMENSIONAL, DIGITAL DATABASE FOR HIGH QUALITY THREE-DIMENSIONAL RECONSTRUCTIONS

1999 ◽  
Vol 40 (6) ◽  
pp. 611-616 ◽  
Author(s):  
Peter BOTtcher ◽  
Johann Maierl ◽  
Thomas Schiemann ◽  
Christian Glaser ◽  
Renate Weller ◽  
...  
Keyword(s):  
Three Dimensional ◽  
High Quality ◽  
Digital Database

scholarly journals Lifting restrictions on coherence loss when characterizing non-transparent hypersonic phononic crystals

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Konrad Rolle ◽  
Dmytro Yaremkevich ◽  
Alexey V. Scherbakov ◽  
Manfred Bayer ◽  
George Fytas
Keyword(s):  
Frequency Domain ◽  
Hybrid Approach ◽  
Three Dimensional ◽  
Phononic Crystals ◽  
Hybrid Technique ◽  
Detection Mechanism ◽  
Pump Probe ◽  
Fabry Perot ◽  
Multilayer Stacks ◽  
Deposition Techniques

AbstractHypersonic phononic bandgap structures confine acoustic vibrations whose wavelength is commensurate with that of light, and have been studied using either time- or frequency-domain optical spectroscopy. Pulsed pump-probe lasers are the preferred instruments for characterizing periodic multilayer stacks from common vacuum deposition techniques, but the detection mechanism requires the injected sound wave to maintain coherence during propagation. Beyond acoustic Bragg mirrors, frequency-domain studies using a tandem Fabry–Perot interferometer (TFPI) find dispersions of two- and three-dimensional phononic crystals (PnCs) even for highly disordered samples, but with the caveat that PnCs must be transparent. Here, we demonstrate a hybrid technique for overcoming the limitations that time- and frequency-domain approaches exhibit separately. Accordingly, we inject coherent phonons into a non-transparent PnC using a pulsed laser and acquire the acoustic transmission spectrum on a TFPI, where pumped appear alongside spontaneously excited (i.e. incoherent) phonons. Choosing a metallic Bragg mirror for illustration, we determine the bandgap and compare with conventional time-domain spectroscopy, finding resolution of the hybrid approach to match that of a state-of-the-art asynchronous optical sampling setup. Thus, the hybrid pump–probe technique retains key performance features of the established one and going forward will likely be preferred for disordered samples.

Integrated Microcomputer-LDV Instrumentation for Studying Finite Wing Aerodynamics

1993 ◽  
Author(s):  
Abdollah Khodadoust
Keyword(s):  
Reynolds Number ◽  
Flow Field ◽  
Data Acquisition ◽  
Fiber Optic ◽  
Three Dimensional ◽  
Laser Doppler ◽  
Laser Doppler Velocimeter ◽  
Ice Accretion ◽  
Wing Model ◽  
Finite Wing

Abstract The effect of a simulated glaze ice accretion on the flow field of a three-dimensional wing is studied experimentally. A PC-based data acquisition and reduction system was used with a four-beam two-color fiber-optic laser Doppler velocimeter (LDV) to map the flow field along three spanwise cuts on the model. Results of the LDV measurements on the upper surface of the finite wing model without the simulated glaze ice accretion are presented for α = 0 degrees at Reynolds number of 1.5 million. Measurements on the centerline of the clean model compared favorably with theory.

Sign in / Sign up

Export Citation Format

Share Document