Energy storage performances regulated by BiMnO3 proportion in limited solid solution films

2020 ◽  
Vol 29 (11) ◽  
pp. 116801
Author(s):  
Fei Guo ◽  
Zhifeng Shi ◽  
Yaping Liu ◽  
Shifeng Zhao
Author(s):  
Pan Gao ◽  
Chang Liu ◽  
Zenghui Liu ◽  
Hongyan Wan ◽  
Yi Yuan ◽  
...  

Author(s):  
Zhongming Fan ◽  
Clive A Randall

The (Bi1/2Na1/2)TiO3 (BNT) based ceramics have been the hot topic for a few years because of their multiple functions, from the piezoelectric properties and more recently to electrostatic energy storage...


2020 ◽  
Vol 12 (6) ◽  
pp. 7010-7020 ◽  
Author(s):  
Abdelali Zaki ◽  
Javier Carrasco ◽  
Daniel Bielsa ◽  
Abdessamad Faik

2019 ◽  
Vol 486 (1) ◽  
pp. 137-140
Author(s):  
M. N. Smirnova ◽  
M. A. Kop’eva ◽  
G. D. Nipan ◽  
G. E. Nikiforova ◽  
Yu. M. Volfkovich ◽  
...  

2020 ◽  
Vol 8 (18) ◽  
pp. 8957-8968 ◽  
Author(s):  
David Pinto ◽  
Babak Anasori ◽  
Hemesh Avireddy ◽  
Christopher E. Shuck ◽  
Kanit Hantanasirisakul ◽  
...  

MXenes demonstrate high performance in energy storage. We report the synthesis and electrochemical characterization of a novel MXene, MoxV4−xC3.


2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Nengneng Luo ◽  
Kai Han ◽  
Matthew J. Cabral ◽  
Xiaozhou Liao ◽  
Shujun Zhang ◽  
...  

Abstract Dielectric capacitors with high energy storage density (Wrec) and efficiency (η) are in great demand for high/pulsed power electronic systems, but the state-of-the-art lead-free dielectric materials are facing the challenge of increasing one parameter at the cost of the other. Herein, we report that high Wrec of 6.3 J cm-3 with η of 90% can be simultaneously achieved by constructing a room temperature M2–M3 phase boundary in (1-x)AgNbO3-xAgTaO3 solid solution system. The designed material exhibits high energy storage stability over a wide temperature range of 20–150 °C and excellent cycling reliability up to 106 cycles. All these merits achieved in the studied solid solution are attributed to the unique relaxor antiferroelectric features relevant to the local structure heterogeneity and antiferroelectric ordering, being confirmed by scanning transmission electron microscopy and synchrotron X-ray diffraction. This work provides a good paradigm for developing new lead-free dielectrics for high-power energy storage applications.


1997 ◽  
Vol 12 (6) ◽  
pp. 1569-1575 ◽  
Author(s):  
Tze-Chiun Chen ◽  
Tingkai Li ◽  
Xubai Zhang ◽  
Seshu B. Desu

The effect of excess bismuth on the ferroelectric properties of SrBi2Ta2O9 (SBT) thin films having a perovskite-like layered structure was investigated for excess bismuth contents ranging from 0% to 100%. For the first time, a limited solid solution of SBT and Bi2O3 was shown to exist when the amount of excess Bi was less than 50%. The formation of a solid solution enhanced the grain size and a-b plane orientation of the films, resulting in substantial improvement in the ferroelectric hysteresis properties of the films. On the other hand, when the amount of excess Bi exceeded 50%, Bi2O3 appeared as a second phase which led to high leakage current and poor ferroelectric hysteresis curves. 30–50% excess Bi content was found to be the optimum composition with respect to grain size, crystallographic orientation, and single phase formation. Within this range, SBT films exhibit low leakage current density (˜10−9 A/cm2) and maximum remanent polarization (2Pr ˜12 µC/cm2).


2000 ◽  
Vol 64 (5) ◽  
pp. 853-865 ◽  
Author(s):  
D. E. Harlov

AbstractExamples of apparent exsolution lamellae and lenticular blebs of chalcopyrite in pyrrhotite are described in orthopyroxene-bearing granulite facies rocks from two, oxidized (log10fO2 = −14 to −11), widely separated, well characterized high grade terranes: the Bamble Sector, SE Norway (795°C, 7.5 kbar) and the Shevaroy Hills Massif, Tamil Nadu, S India (750°C, 7.5 kbar). These exsolution features only occur in isolated pyrrhotite grains and not in integral pyrrhotite-pyrite-chalcopyrite-magnetite grain clusters which essentially represent an oxidation equilibrium. Reintegration of these chalcopyrite exsolution features back into the pyrrhotite host indicate Cu contents ranging from 1 to 5 wt.% in good agreement with experimental observations which indicate that pyrrhotite can take up to 7 wt.% Cu at temperatures above 800°C at pressures of ∼1 bar. This suggests that under high grade conditions these chalcopyrite exsolution features were in solid solution with pyrrhotite. Whether Cu stabilizes pyrrhotite at higher oxygen fugacities or these chalcopyrite-pyrrhotite grains represent a metastable phase is uncertain. One possibility is that the isolated pyrrhotite grains with chalcopyrite lamellae could represent grains that were preferentially not exposed to infiltrating fluids, which oxidized the pyrrhotites in other areas of the sample. A second possibility is that either these grains had enough Cu to stabilize them during pervasive infiltration of oxidizing fluids or that they represent a metastable phase with respect to the overall oxygen fugacity of the sample. The two conclusions that can be drawn from these observations are, firstly, that it is possible for pyrrhotite and chalcopyrite to form a limited solid solution at granulite facies temperatures and pressures under relatively high oxidizing conditions, i.e. 1.5 log units above fayalite-magnetite-quartz, at 800°C and 8 kbar. Secondly, this limited solid solution should have some bearing on the stability of pyrrhotite with respect to co-existing magnetite and pyrite as a function of the oxidation state of the rock, be it inherited or fluid induced.


Sign in / Sign up

Export Citation Format

Share Document