scholarly journals Intermittency of many-particle dispersion in anisotropic magnetohydrodynamic turbulence

2020 ◽  
Vol 1620 ◽  
pp. 012015
Author(s):  
J. Pratt ◽  
A. Busse ◽  
W.-C. Müller
Author(s):  
E. R. Kimmel ◽  
H. L. Anthony ◽  
W. Scheithauer

The strengthening effect at high temperature produced by a dispersed oxide phase in a metal matrix is seemingly dependent on at least two major contributors: oxide particle size and spatial distribution, and stability of the worked microstructure. These two are strongly interrelated. The stability of the microstructure is produced by polygonization of the worked structure forming low angle cell boundaries which become anchored by the dispersed oxide particles. The effect of the particles on strength is therefore twofold, in that they stabilize the worked microstructure and also hinder dislocation motion during loading.


1998 ◽  
Vol 505 (2) ◽  
pp. 974-983 ◽  
Author(s):  
Pablo Dmitruk ◽  
Daniel O. Gomez ◽  
Edward E. DeLuca

2021 ◽  
Vol 87 (2) ◽  
Author(s):  
Renaud Ferrand ◽  
Sébastien Galtier ◽  
Fouad Sahraoui

Using mixed second-order structure functions, a compact exact law is derived for isothermal compressible Hall magnetohydrodynamic turbulence with the assumptions of statistical homogeneity, time stationarity and infinite kinetic/magnetic Reynolds numbers. The resulting law is written as the sum of a Yaglom-like flux term, with an overall expression strongly reminiscent of the incompressible law, and a pure compressible source. Being mainly a function of the increments, the compact law is Galilean invariant but is dependent on the background magnetic field if one is present. Only the magnetohydrodynamic source term requires multi-spacecraft data to be estimated whereas the other components, which include those introduced by the Hall term, can be fully computed with single-spacecraft data using the Taylor hypothesis. These properties make this compact law more appropriate for analysing both numerical simulations and in situ data gathered in space plasmas, in particular when only single-spacecraft data are available.


Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2128
Author(s):  
Paulo F. Teixeira ◽  
José A. Covas ◽  
Loïc Hilliou

The dispersion mechanisms in a clay-based polymer nanocomposite (CPNC) during twin-screw extrusion are studied by in-situ rheo-optical techniques, which relate the CPNC morphology with its viscosity. This methodology avoids the problems associated with post extrusion structural rearrangement. The polydimethylsiloxane (PDMS) matrix, which can be processed at ambient and low temperatures, is used to bypass any issues associated with thermal degradation. Local heating in the first part of the extruder allows testing of the usefulness of low matrix viscosity to enhance polymer intercalation before applying larger stresses for clay dispersion. The comparison of clay particle sizes measured in line with models for the kinetics of particle dispersion indicates that larger screw speeds promote the break-up of clay particles, whereas smaller screw speeds favor the erosion of the clay tactoids. Thus, different levels of clay dispersion are generated, which do not simply relate to a progressively better PDMS intercalation and higher clay exfoliation as screw speed is increased. Reducing the PDMS viscosity in the first mixing zone of the screw facilitates dispersion at lower screw speeds, but a complex interplay between stresses and residence times at larger screw speeds is observed. More importantly, the results underline that the use of larger stresses is inefficient per se in dispersing clay if sufficient time is not given for PDMS to intercalate the clay galleries and thus facilitate tactoid disruption or erosion.


Sign in / Sign up

Export Citation Format

Share Document