scholarly journals Study of steam methane reforming in plasma generated by nanosecond surface gas discharge

2021 ◽  
Vol 2064 (1) ◽  
pp. 012093
Author(s):  
I E Filatov ◽  
D L Kuznetsov ◽  
V V Uvarin
Keyword(s):  
Energy Consumption ◽  
Specific Energy ◽  
Conversion Rate ◽  
Energy Deposition ◽  
Pulse Generator ◽  
Specific Energy Consumption ◽  
Methane Reforming ◽  
Reaction Products ◽  
Steam Methane Reforming ◽  
Steam Methane

Abstract The paper represents the results of the experimental study of steam methane reforming under the action of spark discharge on water surface. Values of conversion rate and output of reaction products at methane pressures of 1 to 5 atm were obtained, and specific energy consumption of reforming process was determined. Pulse generator with a voltage amplitude up to 200 kV and a pulse duration of 15 ns was used to power the discharge. Although an increase in pressure decreases both the methane conversion rate and the energy deposition into the gas mixture, the conversion efficiency and specific energy consumption remain the same. The obtained minimum value of specific energy consumption for steam methane reforming amounted to 10 eV/molecule.

Statistical Method of Deducting Activation Energies for the Steam Methane Reforming Reactions

2022 ◽  
pp. 1-12
Author(s):  
M. N. Nikitin ◽  
D. Pashchenko
Keyword(s):  
Temporal Distribution ◽  
Activation Energies ◽  
Computational Effort ◽  
Heterogeneous Reactions ◽  
Methane Reforming ◽  
Reaction Products ◽  
Operational Parameters ◽  
Steam Methane Reforming ◽  
Steam Methane ◽  
Process Pressure

In this paper, a method of deducting activation energies for heterogeneous reactions of steam methane reforming is presented. The essence of the method lies in iterative evaluation of kinetic parameters, namely activation energies of reactions, for a given reactor. The novelty of the method lies in utilizing a statistical approach to reduce computational effort of numerical simulation. The method produces multivariable correlations between activation energies and operational parameters of the process: pressure, temperature, steam-to-methane ratio, residence time, and catalyst properties. These correlations can be used for numerical simulations of steam methane reforming to yield methane conversion rate, spatial and temporal distribution of reaction products, temperature and pressure within the reactor. An average computational effort is equal to a batch of 18 ([Formula: see text]) simulations for [Formula: see text] variables. The method was demonstrated by evaluating two-variable correlations of activation energies with pressure and temperature. The developed numerical model was validated against adopted experimental data.

Determination of grinding parameters of fenugreek seed

1970 ◽  
Vol 26 (1) ◽  
pp. 16 ◽  
Author(s):  
S Balasubramanian ◽  
Rajkumar Rajkumar ◽  
K K Singh
Keyword(s):  
Particle Size ◽  
Energy Consumption ◽  
Moisture Content ◽  
Specific Energy ◽  
Feed Rate ◽  
Average Particle Size ◽  
Specific Energy Consumption ◽  
Average Particle ◽  
Fenugreek Seeds ◽  
Fenugreek Seed

Experiment to identify ambient grinding conditions and energy consumed was conducted for fenugreek. Fenugreek seeds at three moisture content (5.1%, 11.5% and 17.3%, d.b.) were ground using a micro pulverizer hammer mill with different grinding screen openings (0.5, 1.0 and 1.5 mm) and feed rate (8, 16 and 24 kg h-1) at 3000 rpm. Physical properties of fenugreek seeds were also determined. Specific energy consumptions were found to decrease from 204.67 to 23.09 kJ kg-1 for increasing levels of feed rate and grinder screen openings. On the other hand specific energy consumption increased with increasing moisture content. The highest specific energy consumption was recorded for 17.3% moisture content and 8 kg h-1 feed rate with 0.5 mm screen opening. Average particle size decreased from 1.06 to 0.39 mm with increase of moisture content and grinder screen opening. It has been observed that the average particle size was minimum at 0.5 mm screen opening and 8 kg h-1 feed rate at lower moisture content. Bond’s work index and Kick’s constant were found to increase from 8.97 to 950.92 kWh kg-1 and 0.932 to 78.851 kWh kg-1 with the increase of moisture content, feed rate and grinder screen opening, respectively. Size reduction ratio and grinding effectiveness of fenugreek seed were found to decrease from 4.11 to 1.61 and 0.0118 to 0.0018 with the increase of moisture content, feed rate and grinder screen opening, respectively. The loose and compact bulk densities varied from 219.2 to 719.4 kg m-3 and 137.3 to 736.2 kg m-3, respectively.  

scholarly journals Bibliometric Analysis of Specific Energy Consumption (SEC) in Machining Operations: A Sustainable Response

2021 ◽  
Vol 13 (10) ◽  
pp. 5617
Author(s):  
Raman Kumar ◽  
Sehijpal Singh ◽  
Ardamanbir Singh Sidhu ◽  
Catalin I. Pruncu
Keyword(s):  
Energy Consumption ◽  
Bibliometric Analysis ◽  
Specific Energy ◽  
Specific Energy Consumption ◽  
Primary Data ◽  
Data Content ◽  
Author Keywords ◽  
Link Strength ◽  
Inclusive Analysis ◽  
Machining Operations

This paper’s persistence is to make an inclusive analysis of 268 documents about specific energy consumption (SEC) in machining operations from 2001 to 2020 in the Scopus database. A systematic approach collects information on SEC documents’ primary data; their types, publications, citations, and predictions are presented. The VOSviewer 1.1.16 and Biblioshiny 2.0 software are used for visualization analysis to show the progress standing of SEC publications. The selection criteria of documents are set for citation analysis. The ranks are assigned to the most prolific and dominant authors, sources, articles, countries, and organizations based on the total citations, number of documents, average total citation, and total link strength. The author-keywords, index-keywords, and text data content analysis has been conducted to find the hotspots and progress trend in SEC in machining operations. The most prolific and dominant article, source, author, organization, and country are Anderson et al. “Laser-assisted machining of Inconel 718 with an economic analysis”, the Int J Mach Tools Manuf, Shin Y.C., form Purdue University Singapore, and United States, respectively, based on total citations as per defined criteria. The author keywords “specific cutting energy” and “surface roughness” dominate the machining operations SEC. SEC’s implication in machining operations review and bibliometric analysis is to deliver an inclusive perception for the scholars working in this field. It is the primary paper that utilizes bibliometric research to analyze the SEC in machining operations publications expansively. It is valuable for scholars to grasp the hotspots in this field in time and help the researchers in the SEC exploration arena rapidly comprehend the expansion status and trend.

scholarly journals Batch Reverse Osmosis Desalination Modeling under a Time-Dependent Pressure Profile

Membranes ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 173
Author(s):  
Abdeljalil Chougradi ◽  
François Zaviska ◽  
Ahmed Abed ◽  
Jérôme Harmand ◽  
Jamal-Eddine Jellal ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Reverse Osmosis ◽  
Specific Energy ◽  
Energy Demand ◽  
Specific Energy Consumption ◽  
Pressure Profile ◽  
Recovery Ratio ◽  
Feed Concentration ◽  
Energetic Performance ◽  
Feed Volume

As world demand for clean water increases, reverse osmosis (RO) desalination has emerged as an attractive solution. Continuous RO is the most used desalination technology today. However, a new generation of configurations, working in unsteady-state feed concentration and pressure, have gained more attention recently, including the batch RO process. Our work presents a mathematical modeling for batch RO that offers the possibility of monitoring all variables of the process, including specific energy consumption, as a function of time and the recovery ratio. Validation is achieved by comparison with data from the experimental set-up and an existing model in the literature. Energetic comparison with continuous RO processes confirms that batch RO can be more energy efficient than can continuous RO, especially at a higher recovery ratio. It used, at recovery, 31% less energy for seawater and 19% less energy for brackish water. Modeling also proves that the batch RO process does not have to function under constant flux to deliver good energetic performance. In fact, under a linear pressure profile, batch RO can still deliver better energetic performance than can a continuous configuration. The parameters analysis shows that salinity, pump and energy recovery devices efficiencies are directly linked to the energy demand. While increasing feed volume has a limited effect after a certain volume due to dilution, it also shows, interestingly, a recovery ratio interval in which feed volume does not affect specific energy consumption.

Sign in / Sign up

Export Citation Format

Share Document