scholarly journals Research Of Dynamic Characteristics Of A Three-axis Micromechanical Gyroscope-Accelerometer

2021 ◽  
Vol 2086 (1) ◽  
pp. 012206
Author(s):  
I E Lysenko ◽  
D Y Sevostyanov ◽  
N F Kidyaev ◽  
A V Kovalev
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Dynamic Characteristics ◽  
Element Model ◽  
Natural Oscillation ◽  
Geometric Parameters ◽  
Original Design ◽  
Micromechanical Gyroscope ◽  
Micromechanical Device ◽  
Oscillation Frequencies

Abstract In this paper, an original design of a micromechanical gyroscope-accelerometer is proposed. A parametrizable geometric and finite element model of a micromechanical device is presented. The dynamic characteristics of the structure are studied and the dependences of the natural oscillation frequencies on the geometric parameters of the gyroscope-accelerometer are obtained.

scholarly journals Seismic Failure Pattern Prediction in a Historical Masonry Minaret under Different Earthquakes

2019 ◽  
Vol 2019 ◽  
pp. 1-16 ◽  
Author(s):  
Halil Nohutcu
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Nonlinear Analysis ◽  
Dynamic Characteristics ◽  
Time History ◽  
Element Model ◽  
Ambient Vibration ◽  
Tension Stress ◽  
Historical Structures ◽  
Ambient Vibration Tests

Historical structures are the values that are of great importance to that country, showing the roots of a country, and must be passed on from generation to generation. This study attempts to make a contribution to this goal. Seismic damage pattern estimation in a historical brick masonry minaret under different ground motion levels is investigated by using updated finite element models based on ambient vibration data in this study. Imaret Mosque which was built in 1481 AD is selected for an application. Surveying measurement and material tests were conducted to obtain a 3D solid model and mechanical properties of the components of the minaret. Firstly, the initial 3D finite element model of the minaret was analyzed and numerical dynamic characteristics of the minaret were obtained. Then, ambient vibration tests as well as operational modal analysis were implemented in order to obtain the experimental dynamic characteristics of the minaret. The initial finite element model of the minaret was updated by using the experimental dynamic results. Lastly, linear and nonlinear time-history analyses of the updated finite element model of the minaret were carried out using the acceleration records of two different level earthquakes that occurred in Turkey, in Afyon-Dinar (1995) and Çay-Sultandağı (2002). A concrete damage plasticity model is considered in the nonlinear analyses. The conducted analyses indicate that the compressive and tension stress results of the linear analyses are not as realistic as the nonlinear analysis results. According to the nonlinear analysis, the Çay-Sultandağı earthquake would inflict limited damage on the minaret, whereas the Dinar earthquake would damage some parts of the elements in the transition segment of the minaret.

Simulation and Test Study on Dynamic Characteristic of Air Spring with Auxiliary Chamber

2013 ◽  
Vol 341-342 ◽  
pp. 391-394 ◽  
Author(s):  
Li Qing Sun ◽  
Zhong Xxing Li ◽  
Xu Feng Shen ◽  
Jia Yi Zhu
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Dynamic Characteristic ◽  
Dynamic Characteristics ◽  
Excitation Frequency ◽  
Initial Pressure ◽  
Element Model ◽  
Air Spring ◽  
Chamber Volume ◽  
Lower Excitation

In order to improve dynamic characteristics of air spring with auxiliary chamber, finite element model of air spring R1A390-295 with auxiliary chamber connected with pipe is established,and through analysis to the dynamic characteristics of the model, influence discipline of sitffness characteristics to air spring with different pipe, different auxiliary chamber or different initial pressure are analysed under different excitation. The result show that:minor dynamic sitffness is obtained by using larger pipe or under lower excitation frequency,and as volume of auxiliary chamber increases, the spring dynamic sitffness will decrease accordingly and its amplitude tends to gentle,and influence for decreasing the spring dynamic sitffness is not obvious by continuing to increase the auxiliary chamber volume; the spring dynamic sitffness will increases as initial pressure increases. The validity of Finite element model is verified through dynamic characteristic test .

Simulation of Crank-Rocker Mechanism on Finite Element by ANSYS

2012 ◽  
Vol 605-607 ◽  
pp. 626-629
Author(s):  
Xin Yu Zhang
Keyword(s):  
Finite Element ◽  
Theoretical Analysis ◽  
Finite Element Model ◽  
Dynamic Characteristics ◽  
Element Model ◽  
Analysis And Design

This paper has analyzed the movement of the crank-rocker mechanism by a simple finite element model, to study the establishing of the model and the constraints imposed. It has simulated the movement by software ANSYS, and gets the results which is consistent to the theoretical analysis. It accesses kinematical and dynamic characteristics for the mechanism, and provides the necessary foundation to analysis and design of the complex machinery.

Hydroelastic Modal Analysis of the Perforated Cylindrical Shell in SMART

2011 ◽  
Author(s):  
Youngin Choi ◽  
Seungho Lim ◽  
Kyoung-Su Park ◽  
No-Cheol Park ◽  
Young-Pil Park ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Dynamic Characteristics ◽  
Natural Frequencies ◽  
Element Model ◽  
Mode Shapes ◽  
Steam Generators ◽  
Structure Interaction ◽  
The Finite Element Model ◽  
Reactor Internals

The System-integrated Modular Advanced ReacTor (SMART) developed by KAERI includes components like a core, steam generators, coolant pumps, and a pressurizer inside the reactor vessel. Though the integrated structure improves the safety of the reactor, it can be excited by an earthquake and pump pulsations. It is important to identify dynamic characteristics of the reactor internals considering fluid-structure interaction caused by inner coolant for preventing damage from the excitations. Thus, the finite element model is constructed to identify dynamic characteristics and natural frequencies and mode shapes are extracted from this finite element model.

scholarly journals Analysis of dynamic characteristics of climbing formwork under wind loads

2019 ◽  
Vol 79 ◽  
pp. 01016
Author(s):  
Shicheng Hu ◽  
Jun Li
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Dynamic Characteristics ◽  
Calculation Method ◽  
Design Method ◽  
Element Model ◽  
Wind Load ◽  
Bending Effect ◽  
Matlab Programming ◽  
The Finite Element Model

This article took the climbing formwork which constructed on the bridge at a height of 100 meters as the prototype, then established the finite element model and conducted modal analysis. The APDL language is used to load the wind load which is simulated by the Matlab programming then calculated the displacement and acceleration responses of the climbing formwork and further. The results show that the bending effect of the climbing formwork is more obvious. This calculation method of calculating the wind load, improve the anti-wind design method of the climbing formwork.

Modal Analysis of BT Spindle-Toolholder Interface Based on Abaqus/Standard

2013 ◽  
Vol 662 ◽  
pp. 632-636
Author(s):  
Yong Sheng Zhao ◽  
Jing Yang ◽  
Xiao Lei Song ◽  
Zi Jun Qi
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Modal Analysis ◽  
Dynamic Characteristics ◽  
High Speed ◽  
Element Model ◽  
Contact Theory ◽  
High Speed Machining ◽  
The Finite Element Model

The quality of high speed machining is directly related to dynamic characteristics of spindle-toolholder interface. The paper established normal and tangential interactions of BT spindle-toolholder interface based on finite element contact theory, and analysed free modal in Abaqus/Standard. Then the result was compared with the experimental modal analysis. It shows that the finite element model is effective and could be applied in the future dynamic study of high-speed spindle system.

scholarly journals Validation and Improvement of a Bicycle Crank Arm Based in Numerical Simulation and Uncertainty Quantification

Sensors ◽  
2020 ◽  
Vol 20 (7) ◽  
pp. 1814
Author(s):  
R. Gutiérrez-Moizant ◽  
M. Ramírez-Berasategui ◽  
José A. Calvo ◽  
Carolina Álvarez-Caldas
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Structural Integrity ◽  
Fatigue Behavior ◽  
Dynamic Test ◽  
Element Model ◽  
Experimental Results ◽  
Original Design ◽  
Safety Requirements ◽  
Metrological Control

In this study, a finite element model of a bicycle crank arm are compared to experimental results. The structural integrity of the crank arm was analyzed in a universal dynamic test bench. The instrumentation used has allowed us to know the fatigue behavior of the component tested. For this, the prototype was instrumented with three rectangular strain gauge rosettes bonded in areas where failure was expected. With the measurements made by strain gauges and the forces registers from the load cell used, it has been possible to determine the state of the stresses for different loads and boundary conditions, which has subsequently been compared with a finite element model. The simulations show a good agreement with the experimental results, when the potential sources of uncertainties are considered in the validation process. This analysis allowed us to improve the original design, reducing its weight by 15%. The study allows us to identify the manufacturing process that requires the best metrological control to avoid premature crank failure. Finally, the numerical fatigue analysis carried out allows us to conclude that the new crank arm can satisfy the structural performance demanded by the international bicycle standard. Additionally, it can be suggested to the standard to include the verification that no permanent deformations have occurred in the crank arm during the fatigue test. It has been observed that, in some cases this bicycle component fulfils the minimum safety requirements, but presents areas with plastic strains, which if not taken into account can increase the risk of injury for the cyclist due to unexpected failure of the component.

High Speed Dynamic Characteristics Research for LL680 Flexible Rapier Loom

2013 ◽  
Vol 850-851 ◽  
pp. 274-278
Author(s):  
Feng Wei ◽  
Shou Wei Zhang ◽  
You Hua Ge
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Dynamic Characteristics ◽  
Textile Industry ◽  
High Speed ◽  
Cost Control ◽  
Element Model ◽  
Modeling Method ◽  
Structural Improvement ◽  
Viable Model

The textile industry is China's traditional advantage industry. The demands of the textile industry productions efficiency and cost control are much higher than before. LL680 loom frames finite element model was made and analyzed for the companys demand of high-speed improvement, then used experiment to verify. The results show that the modeling method is right and it provide a viable model for structural improvement.

Modal Experiment and Analysis of a Self-Anchored Suspension Bridge

2014 ◽  
Vol 530-531 ◽  
pp. 284-288
Author(s):  
Jian Rong Yang ◽  
He Xian Su ◽  
Zheng Chong Lai
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Suspension Bridge ◽  
Element Model ◽  
Ambient Vibration ◽  
Original Design ◽  
Element Analysis ◽  
Actual Structure ◽  
3D Finite Element ◽  
Finite Element Package

Modal experiment and 3D finite element analysis are performed on a newly-built self-anchored suspension bridge. The structural modal parameters are identified under ambient vibration excitation. Before that, a 3D finite element model of the bridge is generated using a commercially available finite element package. The measured data as well as the calculated are compared carefully. It illustrates that both of them are in reasonable concordance. The natural frequency of the actual structure is relatively higher than that of finite element model which means the actual bridge is much stiffer than its original design model.

Sign in / Sign up

Export Citation Format

Share Document