Mechanical Properties of Geopolymer Concrete with Modified Calcium and Magnesium

The use of fluid catalytic cracking (FCC) by-products as aluminosilicate precursors in geopolymer binders has attracted significant interest from researchers in recent years owing to their high alumina and silica contents. Introduced in this study is the use of geopolymer concrete comprising FCC residue combined with fly ash as the requisite source of aluminosilicate. Fly ash was replaced with various FCC residue contents ranging from 0–100% by mass of binder. Results from standard testing methods showed that geopolymer concrete rheological properties such as yield stress and plastic viscosity as well as mechanical properties including compressive strength, flexural strength, and elastic modulus were affected significantly by the FCC residue content. With alkali liquid to geopolymer solid ratios (AL:GS) of 0.4 and 0.5, a reduction in compressive and flexural strength was observed in the case of geopolymer concrete with increasing FCC residue content. On the contrary, geopolymer concrete with increasing FCC residue content exhibited improved strength with an AL:GS ratio of 0.65. Relationships enabling estimation of geopolymer elastic modulus based on compressive strength were investigated. Scanning electron microscope (SEM) images and X-ray diffraction (XRD) patterns revealed that the final product from the geopolymerization process consisting of FCC residue was similar to fly ash-based geopolymer concrete. These observations highlight the potential of FCC residue as an aluminosilicate source for geopolymer products.

Download Full-text

Effect of Elevated Temperature on Mechanical Properties of High-Volume Fly Ash-Based Geopolymer Concrete, Mortar and Paste Cured at Room Temperature

Polymers ◽

10.3390/polym13091473 ◽

2021 ◽

Vol 13 (9) ◽

pp. 1473

Author(s):

Jun Zhao ◽

Kang Wang ◽

Shuaibin Wang ◽

Zike Wang ◽

Zhaohui Yang ◽

...

Keyword(s):

Mechanical Properties ◽

Elevated Temperature ◽

Fly Ash ◽

Residual Strength ◽

Elevated Temperatures ◽

High Volume ◽

Sem Analysis ◽

Geopolymer Concrete ◽

Ordinary Concrete ◽

Exposure Temperature

This paper presents results from experimental work on mechanical properties of geopolymer concrete, mortar and paste prepared using fly ash and blended slag. Compressive strength, splitting tensile strength and flexural strength tests were conducted on large sets of geopolymer and ordinary concrete, mortar and paste after exposure to elevated temperatures. From Thermogravimetric analyzer (TGA), X-ray diffraction (XRD), Scanning electron microscope (SEM) test results, the geopolymer exhibits excellent resistance to elevated temperature. Compressive strengths of C30, C40 and C50 geopolymer concrete, mortar and paste show incremental improvement then followed by a gradual reduction, and finally reach a relatively consistent value with an increase in exposure temperature. The higher slag content in the geopolymer reduces residual strength and the lower exposure temperature corresponding to peak residual strength. Resistance to elevated temperature of C40 geopolymer concrete, mortar and paste is better than that of ordinary concrete, mortar and paste at the same grade. XRD, TGA and SEM analysis suggests that the heat resistance of C–S–H produced using slag is lower than that of sulphoaluminate gel (quartz and mullite, etc.) produced using fly ash. This facilitates degradation of C30, C40 and C50 geopolymer after exposure to elevated temperatures.

Download Full-text

Microstructure and Mechanical Properties of Ambiently-Cured Blended Coal Ash-Based Geopolymer Concrete

Materials Science Forum ◽

10.4028/www.scientific.net/msf.857.400 ◽

2016 ◽

Vol 857 ◽

pp. 400-404

Author(s):

Tian Yu Xie ◽

Togay Ozbakkaloglu

Keyword(s):

Mechanical Properties ◽

Experimental Study ◽

Compressive Strength ◽

Fly Ash ◽

Bottom Ash ◽

Coal Ash ◽

Geopolymer Concrete ◽

Mass Ratio ◽

Blended Coal ◽

Microstructure And Mechanical Properties

This paper presents the results of an experimental study on the behavior of fly ash-, bottom ash-, and blended fly and bottom ash-based geopolymer concrete (GPC) cured at ambient temperature. Four bathes of GPC were manufactured to investigate the influence of the fly ash-to-bottom ash mass ratio on the microstructure, compressive strength and elastic modulus of GPC. All the results indicate that the mass ratio of fly ash-to-bottom ash significantly affects the microstructure and mechanical properties of GPCs

Download Full-text

Effect of elevated temperatures on mechanical properties of lightweight geopolymer concrete

Case Studies in Construction Materials ◽

10.1016/j.cscm.2021.e00673 ◽

2021 ◽

Vol 15 ◽

pp. e00673 ◽

Cited By ~ 2

Author(s):

Bassam A. Tayeh ◽

Abdullah M. Zeyad ◽

Ibrahim Saad Agwa ◽

Mohamed Amin

Keyword(s):

Mechanical Properties ◽

Elevated Temperatures ◽

Geopolymer Concrete

Download Full-text

Alternative Concrete – Geopolymer Concrete

10.21741/9781644901533 ◽

2021 ◽

Keyword(s):

Mechanical Properties ◽

Fly Ash ◽

Construction Industry ◽

Building Material ◽

Construction Materials ◽

Raw Material ◽

Geopolymer Concrete ◽

Sustainable Solutions ◽

New Construction ◽

Alkali Activated

Concrete is the most versatile, durable and reliable material and is the most used building material. It requires large amounts of Portland cement which has environmental problems associated with its production. Hence, an alternative concrete – geopolymer concrete is needed. The general aim of this book is to make significant contributions in understanding and deciphering the mechanisms of the realization of the alkali-activated fly ash-based geopolymer concrete and, at the same time, to present the main characteristics of the materials, components, as well as the influence that they have on the performance of the mechanical properties of the concrete. The book deals with in-depth research of the potential recovery of fly ash and using it as a raw material for the development of new construction materials, offering sustainable solutions to the construction industry.

Download Full-text