scholarly journals A new analysis model for borehole stability in gas drilling

2021 ◽  
Vol 861 (4) ◽  
pp. 042016
Author(s):  
X Zhuo ◽  
X Liu ◽  
X Shi ◽  
L Liang ◽  
Y Ding
2014 ◽  
Vol 962-965 ◽  
pp. 415-418
Author(s):  
Zong Gang Wang ◽  
Zhen Wei

The gas drilling mainly relies on the high speed air flow to carry the cuttings. The formation water or oil mixed with the cuttings and then they stick together in clumps after the formation water or oil went into the hole annulus, the clumps stick on the drill string and the borehole. The clumps may block the hole annulus and cause the stick or bury the drill string and many other complex accident. It could stop the cuttings from sticking with the liquid through freezing the formation fluid with the liquid nitrogen. And the natural geotechnical becomes into the frozen soil, and forms the temporary solid which is intact, high strength and low-permeability. This paper utilize the ANSYS finite element program to simulate the 3D model of borehole and hole wall to calculate the freezing radius of the steady state, heat loss, temperature of the freezing point and the conductive heat time of the unsteady state. And this study has provided the basis of the freezing technology for borehole stability of gas drilling.


2010 ◽  
Author(s):  
Gao Li ◽  
Yingfeng Meng ◽  
Houbin Liu ◽  
Yuliang Zhou ◽  
Yixin Zhu

Energies ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2453 ◽  
Author(s):  
Pinghe Sun ◽  
Junyi Zhu ◽  
Binkui Zhao ◽  
Xinxin Zhang ◽  
Han Cao ◽  
...  

The shale of the lower Cambrian Niutitang formation in northwestern Hunan is an ideal reservoir for shale gas. There is a close connection between borehole stability and drilling fluid in shale gas drilling. Ionic stabilizer is a new type of stratum consolidation agent that inhibits the hydration expansion of clay minerals and improves mechanical strength of the borehole. The traditional idea of pore wall protection is to use drilling fluid additives to prevent shale from interacting with water. However, ionic stabilizer can change the hydrophilic of clay minerals in shale, making the particles become hydrophobic and dense, therefore, the formation stability can be enhanced simultaneously. The material used in this paper is different from the normal ionic stabilizer, some chemical bonds that have been changed in the new material called enhanced normality ionic (ENI) stabilizer. This paper utilized the shale samples those obtained from Niutitang formation to study the connection between ENI and the mechanical properties of shale. Mechanical tests and microscopic pore tests were performed on different samples which were soaked in water and the ENI with different concentrations. It has been found through tests that ENI can inhibit the development of shale pores, and as the concentration increases, the inhibition increases. In addition, as the ENI concentration increases, the uniaxial compressive strength and Young’s modulus of the shale increase, and the ratio of stability coefficients decreases. It can be concluded that the ENI can improve the mechanical strength of carbon shale, and prevent the development of rock damage. Moreover, it can improve the ability of rock to resist damage, and enhance borehole stability initiatively.


2014 ◽  
Vol 962-965 ◽  
pp. 419-421
Author(s):  
Zong Gang Wang ◽  
Zhen Wei

The gas drilling mainly relies on the high speed air flow to carry the cuttings. The formation water or oil mixed with the cuttings and then they stick together in clumps after the formation water or oil went into the hole annulus, the clumps stick on the drill string and the borehole. The clumps may block the hole annulus and cause the stick or bury the drill string and many other complex accident. It could stop the cuttings from sticking with the liquid through freezing the formation fluid with the liquid nitrogen. And the natural geotechnical becomes into the frozen soil, and forms the temporary solid which is intact, high strength and low-permeability. This technology could achieve the purpose of strengthening the formation and reducing the fluid flow of the formation, and it greatly broadens the scope of application of gas drilling.


Author(s):  
Jialin Tian ◽  
Gang Liu ◽  
Lin Yang ◽  
Chunming Wu ◽  
Zhi Yang ◽  
...  

Polycrystalline diamond layer peel-off is a hot topic in oil and gas drilling engineering. When an integrated polycrystalline diamond compact cutter suffers overload, there is a rapid decline in its rock-breaking performance and drilling rate of penetration. To modify the comprehensive performance of polycrystalline diamond compact, we innovatively propose a new embedded polycrystalline diamond compact. According to geometric analysis theory combined with the linear combination rule, the three typical embedded design schemes – the imitation palm-shaped, imitation Z-shaped and ring-embedded designs – are discussed. The influences of the number, size, location and combination of the embedded polycrystalline diamond layer on the polycrystalline diamond compact wear mechanism and rock-breaking performance are analysed. The results show that the embedded element and carbide matrix are combined by brazing welding, which not only exerts high abrasion resistance on the polycrystalline diamond layer but also combines with the good impact performance of carbide matrix. Compared with ordinary polycrystalline diamond compact, the intake amount of a single-embedded polycrystalline diamond compact is smaller, and it wears more evenly during the rock-breaking process. Comparing the results from before and after drilling, it effectively prevents the ordinary polycrystalline diamond compact from easily peeling off when suffering overload. The unique wear analysis model can be applied to other types of polycrystalline diamond compact by adjusting the embedding method. The research conclusions provide useful insights into the study of the polycrystalline diamond compact wear mechanism and rock-breaking performance.


2014 ◽  
Vol 962-965 ◽  
pp. 465-468
Author(s):  
Zong Gang Wang ◽  
Zhen Wei

The gas drilling mainly relies on the high speed air flow to carry the cuttings. The formation water or oil mixed with the cuttings and then they stick together in clumps after the formation water or oil went into the hole annulus, the clumps stick on the drill string and the borehole. The clumps may block the hole annulus and cause the stick or bury the drill string and many other complex accident. It could stop the cuttings from sticking with the liquid through freezing the formation fluid with the liquid nitrogen. And the natural geotechnical becomes into the frozen soil, and forms the temporary solid which is intact, high strength and low-permeability. In this paper, according to the characteristic of the gas drilling technology, we optimized the scheme of freezing technology for borehole stability to give the theoretical basis of the industrial application.


2013 ◽  
Vol 344 ◽  
pp. 8-14
Author(s):  
Li Min Ran ◽  
He Ping Pan ◽  
Gong Qiang Li ◽  
Yong Gang Zhao

There is very important practical significance for borehole stability to oil and gas drilling and production. When the mud density is too large (mud column pressure too high),the formation will be fractured. When the the mud density is too low (mud column pressure too low), the borehole wall will be collapsed, and hole will be enlarged. In this paper, the fracture pressures of the formations were determined by using the maximum tensile stress theory. The formation collapse pressures were determined by using the Coulomb - Moore intensity criteria. According to the fracture pressure and collapse pressure to evaluate the borehole stability. The two wells stability evaluation examples were given, and the borehole security mud window were calculated.


Sign in / Sign up

Export Citation Format

Share Document