scholarly journals Estimation of the stability of a fishing vessel during purse seining

2021 ◽  
Vol 937 (3) ◽  
pp. 032057
Author(s):  
A V Ivanovskaya ◽  
E V Bogatyreva
Keyword(s):  
Three Dimensional ◽  
Static Stability ◽  
Tension Force ◽  
Geometrical Parameters ◽  
Dimensional Representation ◽  
Fishing Vessel ◽  
Three Dimensional Representation ◽  
The Stability ◽  
Improve Stability ◽  
Purse Seining

Abstract One of the reasons for the emergency of a fishing vessel, as well as for the failure of fishing equipment, is the sudden tension of the purse rope, which occurs when the fishing equipment is pulled. As a result of the loss of stability the vessel may enter the encircled seine area and even capsize. There are a number of measures to improve stability during the operation of the vessel. However, when designing fishing equipment, it is necessary to know forces acting on the vessel from the seine side. The article presents a method for assessing the static stability of a vessel with a static application of the tension force of the purse rope. As a result of the study, an expression for determining the static heel angle using a three-dimensional representation of the vessel is given. During simulation the geometrical parameters of the purse rope in the process of purse seine were taken into account. The tension force of the purse rope is also presented as a variable.

scholarly journals Conditions for stability of the “vessel-purse seine” system during purse seining

2021 ◽  
Vol 937 (3) ◽  
pp. 032058
Author(s):  
A V Ivanovskaya ◽  
E V Bogatyreva
Keyword(s):  
Mathematical Model ◽  
Purse Seine ◽  
Tension Force ◽  
Hydrodynamic Resistance ◽  
Geometrical Parameters ◽  
Fishing Vessel ◽  
The Relationship ◽  
Improve Stability ◽  
Purse Seining

Abstract In the process of tightening the rings of the lower seine line, significant forces of hydrodynamic resistance of the netting can capsize the vessel or pull it into the encircled seine area. There is a risk of damage to the propeller-rudder system of the vessel. The list and trim of a fishing vessel can occur. It affects the safety and comfort of the crew, leads to malfunctions of fishing equipment and mechanisms, and can cause accidents. During the vessel’s operation, there are a number of measures to improve stability. However, when designing fishing equipment, it is necessary to know the forces acting from the seine side on the vessel. The article discusses the relationship between the vessel and the seine during purse seining. On the basis of the developed mathematical model of the tension force of the purse rope, taking into account the geometrical parameters of the warp during purse seining, conditions for stability of the “vessel-purse seine” system were obtained.

Revealing gross three-dimensional structure in the SEM

1987 ◽  
Vol 45 ◽  
pp. 656-657
Author(s):  
Sterling P. Newberry
Keyword(s):  
Freeze Drying ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Small Object ◽  
Final Solution ◽  
Dimensional Representation ◽  
X Ray ◽  
Three Dimensional Representation ◽  
Freeze Dried ◽  
Critical Point Drying

The beautiful three dimensional representation of small object surfaces by the SEM leads one to search for ways to open up the sample and look inside. Could this be the answer to a better microscopy for gross biological 3-D structure? We know from X-Ray microscope images that Freeze Drying and Critical Point Drying give promise of adequately preserving gross structure. Can we slice such preparations open for SEM inspection? In general these preparations crush more readily than they slice. Russell and Dagihlian got around the problem by “deembedding” a section before imaging. This some what defeats the advantages of direct dry preparation, thus we are reluctant to accept it as the final solution to our problem. Alternatively, consider fig 1 wherein a freeze dried onion root has a window cut in its surface by a micromanipulator during observation in the SEM.

scholarly journals Structured-light 3D scanning of exhibited historical clothing—a first-ever methodical trial and its results

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Jerzy Montusiewicz ◽  
Marek Miłosz ◽  
Jacek Kęsik ◽  
Kamil Żyła
Keyword(s):  
Cultural Heritage ◽  
Information Technologies ◽  
Structured Light ◽  
Three Dimensional ◽  
3D Models ◽  
3D Scanning ◽  
Dimensional Representation ◽  
3D Scanner ◽  
Three Dimensional Representation ◽  
3D Scanners

AbstractHistorical costumes are part of cultural heritage. Unlike architectural monuments, they are very fragile, which exacerbates the problems of their protection and popularisation. A big help in this can be the digitisation of their appearance, preferably using modern techniques of three-dimensional representation (3D). The article presents the results of the search for examples and methodologies of implementing 3D scanning of exhibited historical clothes as well as the attendant problems. From a review of scientific literature it turns out that so far practically no one in the world has made any methodical attempts at scanning historical clothes using structured-light 3D scanners (SLS) and developing an appropriate methodology. The vast majority of methods for creating 3D models of clothes used photogrammetry and 3D modelling software. Therefore, an innovative approach was proposed to the problem of creating 3D models of exhibited historical clothes through their digitalisation by means of a 3D scanner using structural light technology. A proposal for the methodology of this process and concrete examples of its implementation and results are presented. The problems related to the scanning of 3D historical clothes are also described, as well as a proposal how to solve them or minimise their impact. The implementation of the methodology is presented on the example of scanning elements of the Emir of Bukhara's costume (Uzbekistan) from the end of the nineteenth century, consisting of the gown, turban and shoes. Moreover, the way of using 3D models and information technologies to popularise cultural heritage in the space of digital resources is also discussed.

A Method for Measuring Deformation Rates in Hydrogel Structures: Multi-Plane Imaging and Measurement Limitations

2000 ◽  
Author(s):  
Joseph M. Bauer ◽  
David J. Beebe
Keyword(s):  
Cross Sections ◽  
Particle Image ◽  
Three Dimensional ◽  
Local Deformation ◽  
Dimensional Representation ◽  
Volume Changes ◽  
Mechanical Constraints ◽  
Seed Particles ◽  
Three Dimensional Representation ◽  
Image Velocimetry

Abstract A technique for determining the three dimensional motions of hydrogel structures in microchannels is introduced. In developing this technique, we have adapted microscopic particle image velocimetry (μPIV), a method for measuring velocity fields in microfluidic devices. The motions of 1 μm fluorescent seed particles that are incorporated into a hydrogel microstructure (200 μm tall × 400 μm diameter) are tracked over several expansion cycles using microscopy. Combining measurements taken in different planes produces a three-dimensional representation of the motions present during volume changes can be reconstructed. By providing cross sections of the local deformation rates in hydrogel microstructures, this technique allows for the optimization of device designs as well as providing a better understanding of the processes by which hydrogels change volume under mechanical constraints.

A CAD/CAM Representation Model Applied to Tolerance Transfer Methods

1998 ◽  
Author(s):  
Alain Desrochers
Keyword(s):  
Three Dimensional ◽  
Dimensional Representation ◽  
One Dimensional ◽  
Dimensional Tolerance ◽  
Representation Model ◽  
Three Dimensional Representation ◽  
Tolerance Chart ◽  
Cad Cam ◽  
Tolerance Charts

Abstract This paper presents the adaptation of tolerance transfer techniques to a model called TTRS for Technologically and Topologically Related Surfaces. According to this model, any three-dimensional part can be represented as a succession of surface associations forming a tree. Additional tolerancing information can be associated to each TTRS represented as a node on the tree. This information includes dimensional tolerances as well as tolerance chart values. Rules are then established to simulate tolerance chains or stack up along with tolerance charts directly from the graph. This way it becomes possible to combine traditional one dimensional tolerance transfer techniques with a powerful three-dimensional representation model providing high technological contents.

Has a fully three-dimensional space map never evolved in any species? A comparative imperative for studies of spatial cognition

2013 ◽  
Vol 36 (5) ◽  
pp. 557-557 ◽  
Author(s):  
Cynthia F. Moss
Keyword(s):  
Spatial Cognition ◽  
Dimensional Space ◽  
Large Body ◽  
Three Dimensional ◽  
Comparative Data ◽  
Dimensional Representation ◽  
Three Dimensional Representation ◽  
Space Coding ◽  
Three Dimensional Space

AbstractI propose that it is premature to assert that a fully three-dimensional map has never evolved in any species, as data are lacking to show that space coding in all animals is the same. Instead, I hypothesize that three-dimensional representation is tied to an animal's mode of locomotion through space. Testing this hypothesis requires a large body of comparative data.

Sign in / Sign up

Export Citation Format

Share Document