scholarly journals Effect of algae fuel addition on fuel consumption and thermal efficiency of single cylinder diesel engine

2021 ◽  
Vol 1068 (1) ◽  
pp. 012016
Author(s):  
Hazim Sharudin ◽  
N.A. Rahim ◽  
N.I. Ismail ◽  
Sharzali Che Mat ◽  
Nik Rosli Abdullah ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Single Cylinder

Effects of Injection Pressure on Output Power, BTE, SFC and Opacity in a Typical Single-Cylinder Diesel Engine

2020 ◽  
Vol 3 (1) ◽  
pp. 20-26
Author(s):  
Farid Majedi ◽  
Denik Setiyaningrum ◽  
Setyono M. T. Hidayahtullah ◽  
Aries Abbas
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Output Power ◽  
Thermal Efficiency ◽  
Engine Speed ◽  
Injection Pressure ◽  
Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Single Cylinder ◽  
Load Variations

On a single-cylinder diesel engine, injection pressure can be adjusted by changing the thickness of the injector shim. In this study, the injection pressure of 180 bar (standard), 190 bar (+1mm shim), and 210 bar (+2mm shim) was examined on a typical single-cylinder diesel engine with pure diesel fuel. The tests carried out at a constant engine speed of 1500 rpm with load variations of 650, 1300, 1950, and 3600 Watts to investigate the effect of injection pressure on output power, brake thermal efficiency (BTE), specific fuel consumption (SFC) and opacity. The results showed that increasing injection pressure could increase the output power by 19.3% and 17.4% by adding 1 mm and 2 mm shims, respectively. SFC decreased 1.97% and 12.3% compared to standard conditions and opacity with 2 mm shim was lower than 1 mm shim. In conclusion, increasing the injection pressure from 180 to 210 bar by adding 2 mm shim can improve the performance of a single cylinder diesel engine, which includes output power, brake thermal efficiency (BTE), specific fuel consumption (SFC) and opacity.

An Experimental Investigation of Reactivity-Controlled Compression Ignition Combustion in a Single-Cylinder Diesel Engine Using Hydrous Ethanol

2014 ◽  
Vol 137 (3) ◽  
Author(s):  
Wei Fang ◽  
Junhua Fang ◽  
David B. Kittelson ◽  
William F. Northrop
Keyword(s):  
Experimental Investigation ◽  
Diesel Engine ◽  
Thermal Efficiency ◽  
Alternative Fuels ◽  
Compression Ignition ◽  
Reactivity Controlled Compression Ignition ◽  
Single Cylinder ◽  
Diesel Injection ◽  
Soot Emissions ◽  
Hydrous Ethanol

Dual-fuel reactivity-controlled compression ignition (RCCI) combustion using port injection of a less reactive fuel and early-cycle direct injection (DI) of a more reactive fuel has been shown to yield both high thermal efficiency and low NOX and soot emissions over a wide engine operating range. Conventional and alternative fuels such as gasoline, natural gas, and E85 as the lower reactivity fuel in RCCI have been studied by many researchers; however, published experimental investigations of hydrous ethanol use in RCCI are scarce. Making greater use of hydrous ethanol in internal combustion engines has the potential to dramatically improve the economics and life cycle carbon dioxide emissions of using bioethanol. In this work, an experimental investigation was conducted using 150 proof hydrous ethanol as the low reactivity fuel and commercially available diesel as the high reactivity fuel in an RCCI combustion mode at various load conditions. A modified single-cylinder diesel engine was used for the experiments. Based on previous studies on RCCI combustion by other researchers, early-cycle split-injection strategy of diesel fuel was used to create an in-cylinder fuel reactivity distribution to maintain high thermal efficiency and low NOX and soot emissions. At each load condition, timing and mass fraction of the first diesel injection was held constant, while timing of the second diesel injection was swept over a range where stable combustion could be maintained. Since hydrous ethanol is highly resistant to auto-ignition and has large heat of vaporization, intake air heating was needed to obtain stable operations of the engine. The study shows that 150 proof hydrous ethanol can be used as the low reactivity fuel in RCCI through 8.6 bar indicated mean effective pressure (IMEP) and with ethanol energy fraction up to 75% while achieving simultaneously low levels of NOX and soot emissions. With increasing engine load, less intake heating is needed and exhaust gas recirculation (EGR) is required to maintain low NOX emissions.

Factors Affecting Performance of Dual Fuel Compression Ignition Engines

2013 ◽  
Vol 388 ◽  
pp. 217-222
Author(s):  
Mohamed Mustafa Ali ◽  
Sabir Mohamed Salih
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Fuel Injection ◽  
Direct Injection ◽  
Injection System ◽  
Dual Fuel ◽  
Injection Timing ◽  
Compression Ignition ◽  
Factors Affecting

Compression Ignition Diesel Engine use Diesel as conventional fuel. This has proven to be the most economical source of prime mover in medium and heavy duty loads for both stationary and mobile applications. Performance enhancements have been implemented to optimize fuel consumption and increase thermal efficiency as well as lowering exhaust emissions on these engines. Recently dual fueling of Diesel engines has been found one of the means to achieve these goals. Different types of fuels are tried to displace some of the diesel fuel consumption. This study is made to identify the most favorable conditions for dual fuel mode of operation using Diesel as main fuel and Gasoline as a combustion improver. A single cylinder naturally aspirated air cooled 0.4 liter direct injection diesel engine is used. Diesel is injected by the normal fuel injection system, while Gasoline is carbureted with air using a simple single jet carburetor mounted at the air intake. The engine has been operated at constant speed of 3000 rpm and the load was varied. Different Gasoline to air mixture strengths investigated, and diesel injection timing is also varied. The optimum setting of the engine has been defined which increased the thermal efficiency, reduced the NOx % and HC%.

The Comparative Trail Research on the Performance of a Diesel Engine Fuelled with Diesel Fuel and Biodiesel/Diesel Blended Fuel

2011 ◽  
Vol 142 ◽  
pp. 103-106
Author(s):  
Wen Ming Cheng ◽  
Hui Xie ◽  
Gang Li
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Series Of Experiments ◽  
Blended Fuel ◽  
Load Conditions

This paper discusses the brake specific fuel consumption and brake thermal efficiency of a diesel engine using cottonseed biodiesel blended with diesel fuel. A series of experiments were conducted for the various blends under varying load conditions at a speed of 1500 rpm and 2500 rpm and the results were compared with the neat diesel. From the results, it is found that the brake specific fuel consumption of cottonseed biodiesel is slightly higher than that of diesel fuel at different engine loads and speeds, with this increase being higher the higher the percentage of the biodiesel in the blend. And the brake thermal efficiency of cottonseed biodiesel is nearly similar to that of diesel fuel at different engine loads and speeds. From the investigation, it is concluded that cottonseed biodiesl can be directly used in diesel engines without any modifications, at least in small blending ratios.

scholarly journals Performance and emissions of a single cylinder diesel engine operating with rapeseed oil and jp-8 fuel blends

2015 ◽  
Vol 162 (3) ◽  
pp. 13-18
Author(s):  
Gvidonas Labeckas ◽  
Irena Kanapkienė
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Rapeseed Oil ◽  
Jet Fuel ◽  
Brake Specific Fuel Consumption ◽  
Test Results ◽  
Brake Thermal Efficiency ◽  
Engine Load ◽  
Fuel Blends

The article presents experimental test results of a DI single-cylinder, air-cooled diesel engine FL 511 operating with the normal (class 2) diesel fuel (DF), rapeseed oil (RO) and its 10%, 20% and 30% (v/v) blends with aviation-turbine fuel JP-8 (NATO code F-34). The purpose of the research was to analyse the effects of using various rapeseed oil and jet fuel RO90, RO80 and RO70 blends on brake specific fuel consumption, brake thermal efficiency, emissions and smoke of the exhaust. The test results of engine operation with various rapeseed oil and jet fuel blends compared with the respective parameters obtained when operating with neat rapeseed oil and those a straight diesel develops at full (100%) engine load and maximum brake torque speed of 2000 rpm. The research results showed that jet fuel added to rapeseed oil allows to decrease the value of kinematic viscosity making such blends suitable for the diesel engines. Using of rapeseed oil and jet fuel blends proved themselves as an effective measure to maintain fuel-efficient performance of a DI diesel engine. The brake specific fuel consumption decreased by about 6.1% (313.4 g/kW·h) and brake thermal efficiency increase by nearly 1.0% (0.296) compared with the respective values a fully (100%) loaded engine fuelled with pure RO at the same test conditions. The maximum NOx emission was up to 13.7% higher, but the CO emissions and smoke opacity of the exhaust 50.0% and 3.4% lower, respectively, for the engine powered with biofuel blend RO70 compared with those values produced by the combustion of neat rapeseed oil at full (100%) engine load and speed of 2000 rpm.

scholarly journals An Assessment on Performance Characteristics of Diesel Engine Using Lemongrass-Diesel Oil Fuel Blends

2021 ◽  
Author(s):  
Naveen Rana ◽  
Harikrishna Nagwan ◽  
Kannan Manickam
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Performance Characteristics ◽  
Emission Characteristics ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Fuel Blends

Abstract Indeed, the development of alternative fuels for use in internal combustion engines has become an essential requirement to meet the energy demand and to deal with the different problems related to fuel. The research in this domain leads to the identification of adverse fuel properties and for their solution standard limits are being defined. This paper outlines an investigation of performance and combustion characteristics of a 4-stroke diesel engine using different cymbopogon (lemongrass) - diesel fuel blends. 10% to 40% cymbopogon is mixed with diesel fuel and tested for performance characteristics like brake specific fuel consumption and brake thermal efficiency. To obtain emission characteristics smoke density in the terms of HSU has been measured. In result, it has observed that there is an increase of 5% in brake thermal efficiency and 16.33% decrease in brake specific fuel consumption. Regarding emission characteristics, a 12.9% decrease in smoke emission has been found.

Influence of the Air-Path Operating Parameters on the Low Temperature Combustion in a Single-Cylinder Diesel Engine

2007 ◽  
Author(s):  
Carlo Beatrice ◽  
Giovanni Avolio ◽  
Nicola Del Giacomo ◽  
Chiara Guido
Keyword(s):  
Diesel Engine ◽  
Low Temperature ◽  
Fuel Consumption ◽  
Nox Reduction ◽  
Operating Parameters ◽  
Exhaust Pipe ◽  
Low Temperature Combustion ◽  
Passenger Cars ◽  
Single Cylinder ◽  
Temperature Combustion

The present paper describes the effects of some air-path operating parameters on the performance of a modern common-rail diesel engine when it runs under Low Temperature Combustion (LTC) conditions. Aim of the experimental work was to explore the potential of the control of each parameter on the improvement of LTC application to the modern LD diesel engines for passenger cars, in order to meet future NOx emissions limits avoiding penalties in fuel consumption and drivability. In particular, the effects on LTC performance of the following operating parameters were analysed: intake air temperature, exhaust EGR cooler temperature, intake pipe pressure, exhaust pipe pressure and swirl ratio. Tests are carried out with a single-cylinder research diesel engine derived from FIAT 1.9 JTD 16V Multi-Jet in the EURO4 version. Results analysis have shown a significant influence of some examined parameters on the improvement of EGR tolerability, that has led to sensitive NOx reduction, within fixed limits in fuel consumption and smoke. On the contrary, engine behaviour is insensitive to the variation of the other air-path parameters.

Studies on Influence of Injection Timing and Diesel Replacement on LPG-Diesel Dual-Fuel Engine

2003 ◽  
Author(s):  
C. V. Sudhir ◽  
Vijay Desai ◽  
Y. Suresh Kumar ◽  
P. Mohanan
Keyword(s):  
Energy Consumption ◽  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Dual Fuel ◽  
Injection Timing ◽  
Brake Thermal Efficiency ◽  
Full Load ◽  
Smoke Density ◽  
Diesel Operation

Reducing the emissions and fuel consumption for IC engines are no longer the future goals; instead they are the demands of today. People are concerned about rising fuel costs and effects of emissions on the environment. The major contributor for the increased levels of pollutants is the Diesel engines. Diesel engine finds application in almost in all fields, including transportation sector such as buses, trucks, railway engines, etc. and in industries as power generating units. In the present work an attempt is made for effective utilization of diesel engine aiming for reduction in fuel consumption and smoke density. This is achieved by some minor modifications in diesel engine, so as to run the existing diesel engine as a LPG-Diesel dual-fuel engine with LPG (Liquefied Petroleum Gas) induction at air intake. The important aspect of LPG-Diesel dual-fuel engine is that it shows significant reduction in smoke density and improved brake thermal efficiency with reduced energy consumption. An existing 4-S, single cylinder, naturally aspirated, water-cooled, direct injection, CI engine test rig was used for the experimental purpose. With proper instrumentation the tests were conducted under various LPG flow rates, loads, and injection timings. The influence of the diesel replacement by LPG on smoke density, brake specific energy consumption and brake thermal efficiency were studied. The optimal diesel replacement pertaining to the maximum allowable LPG gas flow limits could be assessed with these experiments. The influence of the injection timing variation on the engine performance and smoke density were analyzed form the experimental results. It was also observed that beyond half load operation of the dual-fuel engine, the brake thermal efficiency increases with diesel replacement, and at full load up to 4% improvement was observed compared to full diesel operation. At full load reduction in smoke density up to 25–36% was observed compared to full diesel operation. At advance injection timing of 30°btdc the performance was better with lower emissions compared to normal and retarded injection timings.

Sign in / Sign up

Export Citation Format

Share Document