scholarly journals The Effect of Decreasing Gas Turbine Flue Gas Temperature on The Performance of Muara Tawar Combined Cycle Power Plant

2021 ◽  
Vol 1096 (1) ◽  
pp. 012112
Author(s):  
Muchlisin ◽  
Nastopo Darmawan ◽  
Setya Budi
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Flue Gas ◽  
Combined Cycle ◽  
Gas Temperature ◽  
Combined Cycle Power Plant

The Operating Experience of the Next Generation M501G/M701G Gas Turbine

2001 ◽  
Author(s):  
Y. Tsukuda ◽  
E. Akita ◽  
H. Arimura ◽  
Y. Tomita ◽  
M. Kuwabara ◽  
...  
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
High Efficiency ◽  
Thermal Power ◽  
Operating Experience ◽  
Combined Cycle ◽  
Cycle Performance ◽  
Next Generation ◽  
Gas Temperature ◽  
Combined Cycle Power Plant

The combined cycle power plant is recognized as one of the best thermal power plant for its high efficiency and cleanliness. As the main component of the combined cycle power plant, the gas turbine is the key for improvement of the combined cycle power plant. The next generation G class gas turbine, with turbine inlet gas temperature in 1,500°C range has been developed by Mitsubishi Heavy Industries, Ltd. (MHI). Many advanced technologies; a high efficiency compressor, a steam cooled low NOx combustor, a high temperature and high efficiency turbine, etc., are employed to achieve high combined cycle performance. Actually, MHI has been accumulating the operating experiences of M501G (60Hz machine) a combined cycle verification plant in MHI Takasago, Japan, and achieving the high performance and reliability. Also, M701G (50Hz machine) has been accumulating the operating experience in Higashi Niigata Thermal Power Station of Tohoku Electric Power Co., Inc. in Japan. This paper describes the technical features of M501G/M701G, and up-to-date operating status of the combined cycle power plant in MHI Takasago, Japan.

Steam Turbine Driving Compressor for Gas-Steam Combined Cycle Power Plant

2009 ◽  
Author(s):  
Wancai Liu ◽  
Hui Zhang
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Steam Turbine ◽  
Gas Turbine ◽  
Combined Cycle ◽  
Thermodynamic Process ◽  
Combined Cycle Power Plant ◽  
Steam Cycle

Gas turbine is widely applied in power-generation field, especially combined gas-steam cycle. In this paper, the new scheme of steam turbine driving compressor is investigated aiming at the gas-steam combined cycle power plant. Under calculating the thermodynamic process, the new scheme is compared with the scheme of conventional gas-steam combined cycle, pointing its main merits and shortcomings. At the same time, two improved schemes of steam turbine driving compressor are discussed.

Performance Analysis of a Combined Cycle Power Plant Through Exergetic and Environmental Indices

2017 ◽  
Author(s):  
Edgar Vicente Torres González ◽  
Raúl Lugo Leyte ◽  
Martín Salazar Pereyra ◽  
Helen Denise Lugo Méndez ◽  
Miguel Toledo Velázquez ◽  
...  
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Combined Cycle ◽  
Environmental Indices ◽  
Combined Cycle Power Plant ◽  
Combustion Gases ◽  
Combined Cycle Plant ◽  
Exergetic Analysis ◽  
Gas Turbine Power Plant

In this paper is carried out a comparison between a gas turbine power plant and a combined cycle power plant through exergetic and environmental indices in order to determine performance and sustainability aspects of a gas turbine and combined cycle plant. First of all, an exergetic analysis of the gas turbine and the combined is carried out then the exergetic and environmental indices are calculated for the gas turbine (case A) and the combined cycle (case B). The exergetic indices are exergetic efficiency, waste exergy ratio, exergy destruction factor, recoverable exergy ratio, environmental effect factor and exergetic sustainability. Besides, the environmental indices are global warming, smog formation and acid rain indices. In the case A, the two gas turbines generate 278.4 MW; whereas 415.19 MW of electricity power is generated by the combined cycle (case B). The results show that exergetic sustainability index for cases A and B are 0.02888 and 0.1058 respectively. The steam turbine cycle improves the overall efficiency, as well as, the reviewed exergetic indexes. Besides, the environmental indices of the gas turbines (case A) are lower than the combined cycle environmental indices (case B), since the combustion gases are only generated in the combustion chamber.

Thermo-Economic Assessment Under Electrical Market Uncertainties of a Combined Cycle Gas Turbine Integrated With a Flue Gas-Condensing Heat Pump

2020 ◽  
Author(s):  
Alberto Vannoni ◽  
Andrea Giugno ◽  
Alessandro Sorce
Keyword(s):  
Power Plant ◽  
Power Systems ◽  
Gas Turbine ◽  
Heat Pump ◽  
Flue Gas ◽  
Power Plants ◽  
Greenhouse Gas Emission ◽  
Capital Expenditure ◽  
Combined Cycle ◽  
Gas Turbine Power Plant

Abstract Renewable energy penetration is growing, due to the target of greenhouse-gas-emission reduction, even though fossil fuel-based technologies are still necessary in the current energy market scenario to provide reliable back-up power to stabilize the grid. Nevertheless, currently, an investment in such a kind of power plant might not be profitable enough, since some energy policies have led to a general decrease of both the average price of electricity and its variability; moreover, in several countries negative prices are reached on some sunny or windy days. Within this context, Combined Heat and Power systems appear not just as a fuel-efficient way to fulfill local thermal demand, but also as a sustainable way to maintain installed capacity able to support electricity grid reliability. Innovative solutions to increase both the efficiency and flexibility of those power plants, as well as careful evaluations of the economic context, are essential to ensure the sustainability of the economic investment in a fast-paced changing energy field. This study aims to evaluate the economic viability and environmental impact of an integrated solution of a cogenerative combined cycle gas turbine power plant with a flue gas condensing heat pump. Considering capital expenditure, heat demand, electricity price and its fluctuations during the whole system life, the sustainability of the investment is evaluated taking into account the uncertainties of economic scenarios and benchmarked against the integration of a cogenerative combined cycle gas turbine power plant with a Heat-Only Boiler.

Gas Turbine Combined Cycle Optimized for Postcombustion Carbon Capture

2018 ◽  
Vol 140 (9) ◽  
Author(s):  
S. Can Gülen ◽  
Chris Hall
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Co2 Capture ◽  
Carbon Capture ◽  
Heat Recovery ◽  
Combined Cycle ◽  
Heat Recovery Steam Generator ◽  
Gas Temperature ◽  
Design Challenges ◽  
Stack Gas

This paper describes a gas turbine combined cycle (GTCC) power plant system, which addresses the three key design challenges of postcombustion CO2 capture from the stack gas of a GTCC power plant using aqueous amine-based scrubbing method by offering the following: (i) low heat recovery steam generator (HRSG) stack gas temperature, (ii) increased HRSG stack gas CO2 content, and (iii) decreased HRSG stack gas O2 content. This is achieved by combining two bottoming cycle modifications in an inventive manner, i.e., (i) high supplementary (duct) firing in the HRSG and (ii) recirculation of the HRSG stack gas. It is shown that, compared to an existing natural gas-fired GTCC power plant with postcombustion capture, it is possible to reduce the CO2 capture penalty—power diverted away from generation—by almost 65% and the overall capital cost ($/kW) by about 35%.

Sign in / Sign up

Export Citation Format

Share Document