scholarly journals Numerical Analysis of Crack Propagation in Tubular Glass Column

2021 ◽  
Vol 1200 (1) ◽  
pp. 012020
Author(s):  
A W Ahmed-Abdullamohamed ◽  
M K Kamarudin ◽  
M M. Yussof
Keyword(s):  
Experimental Data ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Failure Modes ◽  
Slenderness Ratio ◽  
Experimental Investigations ◽  
Structural Behaviour ◽  
Element Analysis ◽  
Glass Column ◽  
Glass Columns

Abstract The demand for transparency has increased in the construction industry and contemporary architecture over the last decade. The prior researchers focused on glass columns because their uniqueness and transparent characteristics generate an impressive visual feature. Past studies on structural glass entailed numerous experimental investigations, but FEA was applied in a few investigation exercises. This study aims to validate the experimental data and analyse the crack in the tubular glass column and determine the effectiveness of different slenderness ratios of the glass column. This study investigated the column structural behaviour under compression with different geometrical dimensions of hollow section laminated glass columns to determine their load-carrying capacity, buckling performance, and failure mechanism. Finite element analysis using the explicit method was performed by using ABAQUS. The study found that the failure mechanisms depend on the slenderness ratio classified into two failure modes, either buckling or crushing. The glass column failed due to buckling when the slenderness ratio is more than 40, while it failed due to crushing when the slenderness ratio is less than 40. The finite element analysis did not correlate perfectly with the experimental data since the FEA underestimating the glass performance.

scholarly journals Finite Element Analysis of Composite Laminated Timber (CLT)

Proceedings ◽  
2018 ◽  
Vol 2 (23) ◽  
pp. 1454
Author(s):  
Juan Enrique Martínez-Martínez ◽  
Mar Alonso-Martínez ◽  
Felipe Pedro Álvarez Rabanal ◽  
Juan José del Coz Díaz
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Failure Modes ◽  
Element Model ◽  
Failure Criteria ◽  
Sustainable Construction ◽  
Homogeneous Material ◽  
Timber Species ◽  
Structural Behaviour ◽  
Element Analysis

In the research for sustainable construction, cross-laminated timber (CLT) has gained popularity and become a widely used engineered timber product. However, there are few numerical studies of the structural behaviour of CLT. Among other issues, the orthotropic properties of CLT complicate finite element analysis (FEA). This paper presents a finite element model (FEM) to predict the structural behaviour of CLT beams subjected to sustained flexural loading. This numerical model includes a material model based on the orthotropic material properties of different timber species. Furthermore, the orientation and the properties of each layer are considered. Most of the previous studies simulate CLT beams as a homogeneous material. However, in this work the CLT beam is modelled as a composite material made up of five layers with different orientations and properties. Bonded contacts are used to define the interaction between layers. In addition, nonlinearities, such as large displacement, are used to simulate the behaviour of CLT beams. The model provides the load-displacement relationship and stress concentration. Tsai-Wu failure criteria is used in the simulation to predict the failure modes of the CLT beams studied.

scholarly journals A Finite Element Study on Compressive Resistance Degradation of Square and Circular Steel Braces under Axial Cyclic Loading

2021 ◽  
Vol 11 (13) ◽  
pp. 6094
Author(s):  
Hubdar Hussain ◽  
Xiangyu Gao ◽  
Anqi Shi
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cyclic Loading ◽  
Slenderness Ratio ◽  
Hysteretic Behavior ◽  
Element Analysis ◽  
Section Shape ◽  
Axial Cyclic Loading ◽  
Global Buckling ◽  
Parametric Studies

In this study, detailed finite element analysis was conducted to examine the seismic performance of square and circular hollow steel braces under axial cyclic loading. Finite element models of braces were constructed using ABAQUS finite element analysis (FEA) software and validated with experimental results from previous papers to expand the specimen’s matrix. The influences of cross-section shape, slenderness ratio, and width/diameter-to-thickness ratio on hysteretic behavior and compressive-tensile strength degradation were studied. Simulation results of parametric studies show that both square and circular hollow braces have a better cyclic performance with smaller slenderness and width/diameter-to-thickness ratios, and their compressive-tensile resistances ratio significantly decreases from cycle to cycle after the occurrence of the global buckling of braces.

Three Approaches for Managing Stiffness in Origami-Inspired Mechanisms

2018 ◽  
Author(s):  
Alden Yellowhorse ◽  
Larry L. Howell
Keyword(s):  
Experimental Data ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Engineering Applications ◽  
Element Analysis ◽  
Advantages And Disadvantages ◽  
Large Size ◽  
Selection For

Ensuring that deployable mechanisms are sufficiently rigid is a major challenge due to their large size relative to their mass. This paper examines three basic types of stiffener that can be applied to light, origami-inspired structures to manage their stiffness. These stiffeners are modeled analytically to enable prediction and optimization of their behavior. The results obtained from this analysis are compared to results from a finite-element analysis and experimental data. After verifying these models, the advantages and disadvantages of each stiffener type are considered. This comparison will facilitate stiffener selection for future engineering applications.

Finite Element Analysis of Drilling Frame on Down-the-Hole Drill Based on Mechanical Mechanics and Mechanical Properties

2014 ◽  
Vol 908 ◽  
pp. 282-286
Author(s):  
Wan Rong Wu ◽  
Lin Chen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Working Condition ◽  
Slenderness Ratio ◽  
Stress And Strain ◽  
Limit States ◽  
Element Analysis ◽  
Practical Engineering ◽  
Structure Strength ◽  
Strength And Stiffness

Drilling frame on TD165CH Down-The-Hole Drill that has large slenderness ratio and be longer than 10m is one component of Down-The-Hole drill which is mainly subjected to load.In the process of drilling, drilling frame is not only subjected to loads which are like tensile, compression and torsion and so on, and be under the influence of impacting and vibration of impactor,the situation of force is complicated.By analysing of working condition of Down-The-Hole drill,there get all kinds of limit states of typical working conditions, and then using Ansys doing finite element analysis, there get distribution of the stress and strain of drilling frame and the result of modal analysis to check whether drilling frame meets the requirements of strength and stiffness or not,and whether it is possible to resonate with the impactor or not.By analysis,Structure strength and stiffness of drilling Frame on TD165CH Down-The-Hole drill meet the requirements of practical engineering, and drilling Frame does not resonate with the impactor.

Validation of Nitinol SMA Characteristics Using Finite Element Analysis and Closed Form Solutions

2013 ◽  
Vol 856 ◽  
pp. 147-152
Author(s):  
S.H. Adarsh ◽  
U.S. Mallikarjun
Keyword(s):  
Experimental Data ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Closed Form ◽  
Closed Form Solution ◽  
Form Solution ◽  
Fe Analysis ◽  
Element Analysis ◽  
Complex Behaviour ◽  
Closed Form Solutions

Shape Memory Alloys (SMA) are promising materials for actuation in space applications, because of the relatively large deformations and forces that they offer. However, their complex behaviour and interaction of several physical domains (electrical, thermal and mechanical), the study of SMA behaviour is a challenging field. Present work aims at correlating the Finite Element (FE) analysis of SMA with closed form solutions and experimental data. Though sufficient literature is available on closed form solution of SMA, not much detail is available on the Finite element Analysis. In the present work an attempt is made for characterization of SMA through solving the governing equations by established closed form solution, and finally correlating FE results with these data. Extensive experiments were conducted on 0.3mm diameter NiTinol SMA wire at various temperatures and stress conditions and these results were compared with FE analysis conducted using MSC.Marc. A comparison of results from finite element analysis with the experimental data exhibits fairly good agreement.

Incorporation of Spinal Flexibility Measurements Into Finite Element Analysis

1990 ◽  
Vol 112 (4) ◽  
pp. 481-483 ◽  
Author(s):  
Mack G. Gardner-Morse ◽  
Jeffrey P. Laible ◽  
Ian A. F. Stokes
Keyword(s):  
Experimental Data ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Stiffness Matrix ◽  
Beam Element ◽  
Technical Note ◽  
Element Analysis ◽  
Spinal Motion ◽  
Spinal Flexibility

This technical note demonstrates two methods of incorporating the experimental stiffness of spinal motion segments into a finite element analysis of the spine. The first method is to incorporate the experimental data directly as a stiffness matrix. The second method approximates the experimental data as a beam element.

TTK Chitra tilting disc heart valve model TC2: An assessment of fatigue life and durability

2017 ◽  
Vol 231 (8) ◽  
pp. 758-765 ◽  
Author(s):  
NN Subhash ◽  
Adathala Rajeev ◽  
Sreedharan Sujesh ◽  
CV Muraleedharan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Heart Valve ◽  
Life Prediction ◽  
Heart Valves ◽  
Failure Modes ◽  
Fatigue Life Prediction ◽  
Element Analysis ◽  
Valve Model

Average age group of heart valve replacement in India and most of the Third World countries is below 30 years. Hence, the valve for such patients need to be designed to have a service life of 50 years or more which corresponds to 2000 million cycles of operation. The purpose of this study was to assess the structural performance of the TTK Chitra tilting disc heart valve model TC2 and thereby address its durability. The TC2 model tilting disc heart valves were assessed to evaluate the risks connected with potential structural failure modes. To be more specific, the studies covered the finite element analysis–based fatigue life prediction and accelerated durability testing of the tilting disc heart valves for nine different valve sizes. First, finite element analysis–based fatigue life prediction showed that all nine valve sizes were in the infinite life region. Second, accelerated durability test showed that all nine valve sizes remained functional for 400 million cycles under experimental conditions. The study ensures the continued function of TC2 model tilting disc heart valves over duration in excess of 50 years. The results imply that the TC2 model valve designs are structurally safe, reliable and durable.

scholarly journals Residual Stress Distribution in Feal Weld Overlay on Steel

1994 ◽  
Vol 364 ◽  
Author(s):  
X.-L. Wang ◽  
S. Spooner ◽  
C. R. Hubbard ◽  
P. J. Maziasz ◽  
G. M. Goodwin ◽  
...  
Keyword(s):  
Experimental Data ◽  
Heat Treatment ◽  
Residual Stress ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Post Weld Heat Treatment ◽  
Residual Stress Distribution ◽  
Element Analysis ◽  
Weld Overlay

AbstractNeutron diffraction was used to measure the residual stress distribution in an FeAl weld overlay on steel. It was found that the residual stresses accumulated during welding were essentially removed by the post-weld heat treatment that was applied to the specimen; most residual stresses in the specimen developed during cooling following the post-weld heat treatment. The experimental data were compared with a plasto-elastic finite element analysis. While some disagreement exists in absolute strain values, there is satisfactory agreement in strain spatial distribution between the experimental data and the finite element analysis.

The Finite Element Analysis of Omni-Direction Side-Loading Forklift Truck Lifting System Based on COSMOSWorks

2012 ◽  
Vol 184-185 ◽  
pp. 534-537
Author(s):  
Jing Jing Zhou ◽  
Ai Dong Guo ◽  
Chun Hui Li ◽  
Zhen Jiang Lin ◽  
Tie Zhuang Wu
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Structural Optimization ◽  
Experimental Measurements ◽  
Element Analysis ◽  
Forklift Truck ◽  
The Finite Element Analysis ◽  
Lifting System

By setting contact sets, achieved overall analysis results of the mechanical properties with omni-direction side-loading forklift truck lifting system based on COSMOSWorks. And made an experimental measurements to omni-direction side-loading forklift truck lifting system by electrometric methods. There was a good relevance between experimental data and calculation values, and the deviation was basically within the 10 percent allowed. Finally, in this way it verified the correctness and reliability of the finite element analysis by experimental measurements. Ensured the omni-direction side-loading forklift truck lifting system could be safe and efficient to work. And also it laid a foundation for subsequent structural optimization.

Sign in / Sign up

Export Citation Format

Share Document