scholarly journals Electromagnetic shielding effectiveness for A16061 metal matrix composite based mesh wire reinforced with Flyash for oblique incidence of EM wave

2021 ◽  
Vol 1206 (1) ◽  
pp. 012025
Author(s):  
Srinu Budumuru ◽  
M. Satya Anuradha
Keyword(s):  
Composite Material ◽  
Metal Matrix ◽  
Oblique Incidence ◽  
Electrical Characteristics ◽  
Shielding Effectiveness ◽  
Electronic Technology ◽  
Complete Control ◽  
Electromagnetic Shield ◽  
Electromagnetic Pollution ◽  
Electromagnetic Shielding Effectiveness

Abstract Nowadays, flywire is used exclusively in aeronautical applications. A plane’s complete control is dependent on electronic technology, yet it suffers from high-intensity radiated fields. An electromagnetic shield may be necessary to protect this equipment from external electromagnetic pollution. The current project attempts to create a protective barrier around the operating equipment to enhance its efficiency. AL6061 composite material was used to create a metal matrix mesh shield. It is reinforced with fly ash in various volume fractions, and the electrical characteristics and Shielding Effectiveness are determined (SE). The maximum SE is 45.36dB obtained, which can be effectively used as a shield for aerospace and other applications.

Analysis of shielding effectiveness and mechanical properties of metal matrix composite AL6061 reinforced with Al2O3 and fly ash for oblique incidence of EM wave

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Srinu Budumuru ◽  
Satya Anuradha Mosa
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Metal Matrix Composite ◽  
Matrix Composite ◽  
High Intensity ◽  
Metal Matrix ◽  
Oblique Incidence ◽  
Shielding Effectiveness ◽  
Content Type ◽  
Aircraft System

PurposeFiber-reinforced polymers (FRP) contain critical electrical conductivity for high-intensity radiated fields such as lightning strike susceptibility, electromagnetic energy from radar, airborne radio frequency transmitter. To provide high-intensity radiated field protection (HIRFP) for the electric and electronic aircraft system and defied the EMI effect on it, metal matrix composite was conquered. To provide the dynamic ever-increasing requirement of industries, it is necessary that Al6061 metal matrix composite assisted with AL2O3 and fly ash is used to construct the aircraft to provide HIRFP. The thickness of the material can be maintained as low as possible to use it as a coating material for the aircraft surface. X-band for oblique incidence is used to measure electromagnetic and mechanical safeguarding properties of composites.Design/methodology/approachDay by day, the applications of aerospace are becoming digital and automated. Proper shielding techniques are required to operate digital electronic devices without electromagnetic interference. It leads to a rapid rise in temperature, thermal ablation, delamination, and adverse effects on the electric and electronic aircraft system. Fly ash, a metal matrix material composite AL6061 with different percentages of reinforcement of Al2O3, was contemplated and experimented with for mechanical properties like tensile strength, density and hardness.FindingsThe obtained results compared with adjusted values and an improvement of 0.19, 0.18, 0.14 g/cm3 for density of MMC-1, MMC-2, MMC-3.31, 11 MPa for tensile strength of MMC-1, MMC-2. 24, 27, 23 BHN for hardness of MMC-1, MMC-2, MMC-3. With regard to the shielding effectiveness the results compared with adjusted values and obtained 11.36, 14.56, 19.47 dB better value than it. According to the above results, fabricated MMC’s provide superior results for a defined application like HIRFP(Surface material of aircraft).Practical implicationsIt can be used to protect electronic devices under a high-intensity radiated field, mainly in aircraft design to protect from lightning effect.Originality/valueFor a better approximation of the signal toward the practical case, the oblique incidence was considered with a different combination of Al2O3 and fly ash, reinforced to pure AL6061 to get better shielding and mechanical properties.

Effect of the Nature of the Layer of Conductive Polymer Composite on the Effectiveness of a Multi-Layer Electromagnetic Shielding

2014 ◽  
Vol 1064 ◽  
pp. 83-88 ◽  
Author(s):  
A. Ansri ◽  
M. Hamouni ◽  
S. Khaldi
Keyword(s):  
Composite Material ◽  
Polymer Composite ◽  
Conductive Polymer ◽  
Electromagnetic Shielding ◽  
Polymer Layer ◽  
Shielding Effectiveness ◽  
Conductive Polymer Composite ◽  
Electromagnetic Shielding Effectiveness

The purpose of this communication is to study the effect of the nature of the polymer layer on the electromagnetic shielding effectiveness of a multilayer organic based composite material. Our work is divided into two parts. In the first part, we set different layer thicknesses and the frequency is varied. In the second part, we set the frequency and do vary the nature of the polymer layer and the thickness of the different layers. The different results obtained we show that the efficiency is strongly influenced by the nature of the polymer layer.

scholarly journals Investigating electromagnetic shielding effectiveness of knitted fabrics made by barium titanate/polyester bicomponent yarn

2019 ◽  
Vol 14 ◽  
pp. 155892501983780
Author(s):  
Rumeysa Celen ◽  
Yusuf Ulcay
Keyword(s):  
Barium Titanate ◽  
Electronic Devices ◽  
Electromagnetic Shielding ◽  
Shielding Effectiveness ◽  
Knitted Fabrics ◽  
Mechanical And Electrical Properties ◽  
Fabric Density ◽  
Conductive Textile ◽  
Electromagnetic Pollution ◽  
Electromagnetic Shielding Effectiveness

Electromagnetic pollution is a problem that damages all creatures and electronic devices. Most of the electronic devices we use at homes emit electromagnetic radiation. Conductive textile surfaces are used for electromagnetic shielding applications. However, to provide electromagnetic shielding, there has not been any study on the bicomponent fiber production with barium titanate. For this purpose, in this study, bicomponent yarns were produced using three different adding ratios of barium titanate. The mechanical and electrical properties of the yarns were investigated. Knitted fabrics were produced from bicomponent yarns with two different fabric densities using a circular knitting machine. The effects of the additive ratio and the fabric density on the effectiveness of the electromagnetic shielding were also investigated. The fabric with the highest content of the barium titanate and greater fabric density showed the highest shielding effectiveness, reaching 25.95 dB at 0.02 GHz.

Analyses on the Manufacture and Physical Properties of Electromagnetic Shielding/ Far Infrared Ray Nonwoven

2010 ◽  
Vol 97-101 ◽  
pp. 1790-1793
Author(s):  
Jia Horng Lin ◽  
Yu Tien Huang ◽  
Chin Mei Lin ◽  
Yi Chang Yang ◽  
Chien Teng Hsieh ◽  
...  
Keyword(s):  
Physical Properties ◽  
Far Infrared ◽  
Electromagnetic Shielding ◽  
Breaking Force ◽  
Shielding Effectiveness ◽  
Machine Direction ◽  
Tear Strength ◽  
Burst Strength ◽  
Far Infrared Ray ◽  
Electromagnetic Shielding Effectiveness

According to the results, when low melting polyester fiber increased to be 20%, the electromagnetic shielding/ far infrared ray nonwoven obtained the optimum burst strength, maximum breaking force and maximum tear strength, and they were as follows: burst strength was 4.2 kgf/cm2; maximum breaking force was 153.59 N in the cross machine direction and 70.80 N in the machine direction; maximum tear strength was 215.77 N in cross machine direction and 117.07 N in machine direction; and optimum electromagnetic shielding effectiveness (EMSE) was 45 dB.

Sign in / Sign up

Export Citation Format

Share Document