Electromagnetic shielding effectiveness of composite material

1999 ◽  
Author(s):  
Patrick J. Serna ◽  
Gary H. Liechty
Keyword(s):  
Composite Material ◽  
Electromagnetic Shielding ◽  
Shielding Effectiveness ◽  
Electromagnetic Shielding Effectiveness

Effect of the Nature of the Layer of Conductive Polymer Composite on the Effectiveness of a Multi-Layer Electromagnetic Shielding

2014 ◽  
Vol 1064 ◽  
pp. 83-88 ◽  
Author(s):  
A. Ansri ◽  
M. Hamouni ◽  
S. Khaldi
Keyword(s):  
Composite Material ◽  
Polymer Composite ◽  
Conductive Polymer ◽  
Electromagnetic Shielding ◽  
Polymer Layer ◽  
Shielding Effectiveness ◽  
Conductive Polymer Composite ◽  
Electromagnetic Shielding Effectiveness

The purpose of this communication is to study the effect of the nature of the polymer layer on the electromagnetic shielding effectiveness of a multilayer organic based composite material. Our work is divided into two parts. In the first part, we set different layer thicknesses and the frequency is varied. In the second part, we set the frequency and do vary the nature of the polymer layer and the thickness of the different layers. The different results obtained we show that the efficiency is strongly influenced by the nature of the polymer layer.

Analyses on the Manufacture and Physical Properties of Electromagnetic Shielding/ Far Infrared Ray Nonwoven

2010 ◽  
Vol 97-101 ◽  
pp. 1790-1793
Author(s):  
Jia Horng Lin ◽  
Yu Tien Huang ◽  
Chin Mei Lin ◽  
Yi Chang Yang ◽  
Chien Teng Hsieh ◽  
...  
Keyword(s):  
Physical Properties ◽  
Far Infrared ◽  
Electromagnetic Shielding ◽  
Breaking Force ◽  
Shielding Effectiveness ◽  
Machine Direction ◽  
Tear Strength ◽  
Burst Strength ◽  
Far Infrared Ray ◽  
Electromagnetic Shielding Effectiveness

According to the results, when low melting polyester fiber increased to be 20%, the electromagnetic shielding/ far infrared ray nonwoven obtained the optimum burst strength, maximum breaking force and maximum tear strength, and they were as follows: burst strength was 4.2 kgf/cm2; maximum breaking force was 153.59 N in the cross machine direction and 70.80 N in the machine direction; maximum tear strength was 215.77 N in cross machine direction and 117.07 N in machine direction; and optimum electromagnetic shielding effectiveness (EMSE) was 45 dB.

The investigation of the electromagnetic shielding effectiveness of multi-layered nanocomposite materials from reduced graphene oxide-doped P(AN-VAc) nanofiber mats/PP spunbond

2018 ◽  
Vol 53 (11) ◽  
pp. 1541-1553
Author(s):  
İsmail Tiyek ◽  
Mustafa Yazıcı ◽  
Mehmet Hakkı Alma ◽  
Şükrü Karataş
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Electromagnetic Shielding ◽  
Shielding Effectiveness ◽  
Surface Samples ◽  
Reduced Graphene ◽  
Nanofiber Mats ◽  
Electromagnetic Shielding Effectiveness ◽  
Poly Acrylonitrile ◽  
Shielding Material

In this study, the production of an electromagnetic shielding material by doping reduced graphene oxide was aimed. Graphene oxide was produced from graphite through modified Hummer's method, and reduced graphene oxide was obtained by reducing graphene oxide. The reduced graphene oxide- doped poly(acrylonitrile-co-vinyl acetate) nanofiber mats were spun on the Polypropylene spunbond fabrics by a multi-needle electrospinning device at different lap numbers. Multi-layered surface samples of spunbond/nanofiber mats were obtained via calendaring process after overlapping in different layer numbers. The electromagnetic shielding effectiveness (EMSE) of these samples was measured in the range of 0.03–1.5 GHz according to ASTM D4935 standard. The effects of the numbers of laps and layers on the electromagnetic shielding effectiveness of the mats were also investigated. It was found that electromagnetic shielding effectiveness is greatly affected by changing the numbers of laps and layers. Consequently, the highest electromagnetic shielding effectiveness value of 35.49 dB was obtained from the sample containing two layers of nanofiber mats, each of which consisted 50 laps of nanofibers.

scholarly journals Electromagnetic Shielding Effectiveness of Woven Fabrics with High Electrical Conductivity: Complete Derivation and Verification of Analytical Model

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1657 ◽  
Author(s):  
Marek Neruda ◽  
Lukas Vojtech
Keyword(s):  
Electrical Conductivity ◽  
Analytical Model ◽  
Electromagnetic Interference ◽  
Woven Fabrics ◽  
Electromagnetic Shielding ◽  
High Electrical Conductivity ◽  
Shielding Effectiveness ◽  
Textile Composite ◽  
A Value ◽  
Electromagnetic Shielding Effectiveness

In this paper, electromagnetic shielding effectiveness of woven fabrics with high electrical conductivity is investigated. Electromagnetic interference-shielding woven-textile composite materials were developed from a highly electrically conductive blend of polyester and the coated yarns of Au on a polyamide base. A complete analytical model of the electromagnetic shielding effectiveness of the materials with apertures is derived in detail, including foil, material with one aperture, and material with multiple apertures (fabrics). The derived analytical model is compared for fabrics with measurement of real samples. The key finding of the research is that the presented analytical model expands the shielding theory and is valid for woven fabrics manufactured from mixed and coated yarns with a value of electrical conductivity equal to and/or higher than σ = 244 S/m and an excellent electromagnetic shielding effectiveness value of 25–50 dB at 0.03–1.5 GHz, which makes it a promising candidate for application in electromagnetic interference (EMI) shielding.

scholarly journals Conductive textile structures and their contribution to electromagnetic shielding effectiveness

2020 ◽  
Vol 71 (05) ◽  
pp. 432-437
Author(s):  
Ion Razvan Radulescu ◽  
Lilioara Surdu ◽  
Bogdana Mitu ◽  
Cristian Morari ◽  
Marian Costea ◽  
...  
Keyword(s):  
Electromagnetic Compatibility ◽  
Modern Technology ◽  
Electromagnetic Shielding ◽  
Shielding Effectiveness ◽  
Frequency Range ◽  
Conductive Coatings ◽  
Tem Cell ◽  
Conductive Yarns ◽  
Conductive Textile ◽  
Electromagnetic Shielding Effectiveness

Fabrics for electromagnetic shielding are especially relevant in nowadays context, contributing to human’s protection and wellbeing and to proper functioning of electronic equipment, in relation to electromagnetic compatibility. Fabrics with electromagnetic shielding properties employ two main technologies, namely insertion of conductive yarns and application of conductive coatings. Magnetron sputtering is a modern technology to enable conductive coatings with thickness in the range of nanometers onto fabrics. This paper aims to analyze contribution of various conductive textile structures out of both fabrics with inserted conductive yarns and coatings to Electromagnetic shielding effectiveness (EMSE). EMSE was measured in the frequency range of 0.1–1000 MHz by using a TEM cell according to standard ASTM ES-07. Results show a gain of 10–25 dB when introducing silver yarns in warp/ weft direction, a variation of 5–35 dB between conductive yarns out of silver and stainless steel and an up to 12 dB gain out of thin copper coating by magnetron plasma onto the fabrics with inserted conductive yarns

Sign in / Sign up

Export Citation Format

Share Document