Multi-channeled vortex beam switch with moiré metasurfaces

2021 ◽  
Author(s):  
Cheng Cui ◽  
Zheng Liu ◽  
Bin Hu ◽  
Yurong Jiang ◽  
Juan Liu
Keyword(s):  
Functional Diversity ◽  
Optical Communications ◽  
Topological Charge ◽  
Signal Transmission ◽  
Polarized Light ◽  
Vortex Beam ◽  
Practical Applications ◽  
Linearly Polarized ◽  
Vortex Beams ◽  
Topological Charges

Abstract Tunable metasurface devices are considered to be an important link for metasurfaces to practical applications due to their functional diversity and high adaptability to the application scenarios. Metasurfaces have unique value in the generation of vortex beams because they can realize light wavefronts of any shape. In recent years, several vortex beam generators using metasurfaces have been proposed. However, the topological charge generally lacks tunability, which reduces the scope of their applications. Here, we propose an active tunable multi-channeled vortex beam switch based on a moiré structure composed of two cascaded dielectric metasurfaces. The simulation results show that when linearly polarized light with a wavelength of 810 nm is incident, the topological charge from -6 to +6 can be continuously generated by relatively rotating the two metasurfaces. Meanwhile, different topological charges are deflected to different spatial channels, realizing the function of multi-channeled signal transmission. We also study the efficiency and broadband performance of the structure. The proposed multi-channeled separation method of vortex beams that can actively tune topological charges paves the way for the compactness and functional diversity of devices in the fields of optical communications, biomedicine, and optoelectronics.

scholarly journals High-Efficiency Spin-Related Vortex Metalenses

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1485
Author(s):  
Wei Wang ◽  
Ruikang Zhao ◽  
Shilong Chang ◽  
Jing Li ◽  
Yan Shi ◽  
...  
Keyword(s):  
Angular Momentum ◽  
Orbital Angular Momentum ◽  
Topological Charge ◽  
High Efficiency ◽  
Infrared Band ◽  
Mid Infrared ◽  
Integrated Devices ◽  
Vortex Beams ◽  
Topological Charges

In this paper, one spin-selected vortex metalens composed of silicon nanobricks is designed and numerically investigated at the mid-infrared band, which can produce vortex beams with different topological charges and achieve different spin lights simultaneously. Another type of spin-independent vortex metalens is also designed, which can focus the vortex beams with the same topological charge at the same position for different spin lights, respectively. Both of the two vortex metalenses can achieve high-efficiency focusing for different spin lights. In addition, the spin-to-orbital angular momentum conversion through the vortex metalens is also discussed in detail. Our work facilitates the establishment of high-efficiency spin-related integrated devices, which is significant for the development of vortex optics and spin optics.

scholarly journals Arbitrary polarization conversion for pure vortex generation with a single metasurface

Nanophotonics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 727-732
Author(s):  
Marco Piccardo ◽  
Antonio Ambrosio
Keyword(s):  
Angular Momentum ◽  
Polarization Conversion ◽  
Vortex Beam ◽  
Vortex Generation ◽  
Optical Elements ◽  
Amplitude Control ◽  
Cavity Resonators ◽  
Vortex Beams ◽  
Topological Charges ◽  
Selection Of

AbstractThe purity of an optical vortex beam depends on the spread of its energy among different azimuthal and radial modes, also known as $\ell $- and p-modes. The smaller the spread, the higher the vortex purity and more efficient its creation and detection. There are several methods to generate vortex beams with well-defined orbital angular momentum, but only few exist allowing selection of a pure radial mode. These typically consist of many optical elements with rather complex arrangements, including active cavity resonators. Here, we show that it is possible to generate pure vortex beams using a single metasurface plate—called p-plate as it controls radial modes—in combination with a polarizer. We generalize an existing theory of independent phase and amplitude control with birefringent nanopillars considering arbitrary input polarization states. The high purity, sizeable creation efficiency, and impassable compactness make the presented approach a powerful complex amplitude modulation tool for pure vortex generation, even in the case of large topological charges.

Detecting the topological charge of a vortex beam by an arc slit diffraction

2017 ◽  
Vol 31 (23) ◽  
pp. 1750172 ◽  
Author(s):  
Dongzhi Fu ◽  
Hailong Zhou ◽  
Kaiwei Wang ◽  
Pei Zhang ◽  
Jianji Dong ◽  
...  
Keyword(s):  
Angular Momentum ◽  
Diffraction Pattern ◽  
Orbital Angular Momentum ◽  
Topological Charge ◽  
Light Spot ◽  
Far Field ◽  
Vortex Beam ◽  
Efficient Measurement ◽  
Vortex Beams

The simple and efficient measurement of the light orbital angular momentum (OAM) is essential to both the classical and quantum applications with vortex beams. Here, we study the diffraction pattern in the far field when a vortex beam passes through an arc slit and demonstrate experimentally that a light spot of the diffraction pattern has a displacement which is linear to the topological charge (TC) of the incident vortex beam. Based on this property, this method is capable of measuring both modulus and sign of TC of the vortex beam. Furthermore, this scheme allows identifying multiple OAM states simultaneously.

scholarly journals On-Column 2p Bound State with Topological Charge ±1 Excited by an Atomic-Size Vortex Beam in an Aberration-Corrected Scanning Transmission Electron Microscope

2012 ◽  
Vol 18 (4) ◽  
pp. 711-719 ◽  
Author(s):  
Huolin L. Xin ◽  
Haimei Zheng
Keyword(s):  
Topological Charge ◽  
Bound States ◽  
Numerical Solutions ◽  
Incident Beam ◽  
Vortex Beam ◽  
Phase Front ◽  
Atomic Size ◽  
Convergence Angle ◽  
Vortex Beams ◽  
Energy Convergence

AbstractAtomic-size vortex beams have great potential in probing the magnetic moment of materials at atomic scales. However, the limited depth of field of vortex beams constrains the probing depth in which the helical phase front is preserved. On the other hand, electron channeling in crystals can counteract beam divergence and extend the vortex beam without disrupting its topological charge. Specifically, in this article, we report that atomic vortex beams with topological charge ±1 can be coupled to the 2p columnar bound states and propagate for more than 50 nm without being dispersed and losing its helical phase front. We give numerical solutions to the 2p columnar orbitals and tabulate the characteristic size of the 2p states of two typical elements, Co and Dy, for various incident beam energies and various atomic densities. The tabulated numbers allow estimates of the optimal convergence angle for maximal coupling to 2p columnar orbital. We have also developed analytic formulae for beam energy, convergence angle, and hologram-dependent scaling for various characteristic sizes. These length scales are useful for the design of pitch-fork apertures and operations of microscopes in the vortex-beam imaging mode.

scholarly journals Spiral phase plate with multiple singularity centers

2020 ◽  
Vol 44 (6) ◽  
pp. 901-908
Author(s):  
V.V. Kotlyar ◽  
A.A. Kovalev ◽  
E.S. Kozlova ◽  
A.P. Porfirev
Keyword(s):  
Topological Charge ◽  
Beam Power ◽  
Phase Plate ◽  
Circular Aperture ◽  
Vortex Beam ◽  
Finite Radius ◽  
Phase Singularity ◽  
Initial Plane ◽  
Topological Charges ◽  
Spiral Phase

We investigate a multispiral phase plate (MSPP) with multiple centers of phase singularity arbitrarily located in the MSPP plane. Equations to describe the topological charge of an optical vortex in the initial plane immediately behind the MSPP and orbital angular momentum (OAM) normalized relative to the beam power are derived. The topological charge in the initial plane is found as a sum of the topological charges of all singularities if their centers are located inside a finite-radius circular aperture. If the phase singularity centers are partially located on the boundary of a circular diaphragm limiting the MSPP, the total topological charge is found as the sum of all singularities divided by 2. Total OAM that the vortex carries depends on the location of the singularity centers: the farther from the center of the plate the singularity center is located, the smaller is its contribution to the OAM. If all singularity centers are located on the boundary of the diaphragm limiting MSPP, then the OAM of the vortex beam equals zero, although in this case the topological charge of the beam is nonzero.

scholarly journals Generating Different Polarized Multiple Vortex Beams at Different Frequencies from Laminated Meta-Surface Lenses

Micromachines ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 61
Author(s):  
Pengfei Gao ◽  
Rui Yang
Keyword(s):  
Angular Momentum ◽  
Orbital Angular Momentum ◽  
Communication System ◽  
The Other ◽  
Vortex Beam ◽  
Other Hand ◽  
High Efficient ◽  
Linearly Polarized ◽  
Vortex Beams ◽  
The Way

We demonstrate the generation of multiple orbital angular momentum (OAM) vortex beams with different radiating states at different frequencies through a laminated meta-surface lens consisting of a dual polarized meta-array interconnected with a frequency selective meta-array. The co-linearly polarized (LP) waves from the source can directly penetrate the meta-surface lens to form multiple OAM vortex beams at one frequency. On the other hand, the meta-surface lens will be capable of releasing the cross-LP counterparts at another frequency with high-efficient polarization conversions to have multiple OAM vortex radiations with different radiating directions and vortex modes. Our design, using laminated meta-surface lens to synthesize multiple OAM vortex beams with orthogonal polarizations at different frequencies, should pave the way for building up more advanced vortex beam communication system with expanded diversity of the meta-device.

scholarly journals Comparison of backward flow values in the sharp focus of light fields with polarization and phase singularity

2019 ◽  
Vol 43 (2) ◽  
pp. 174-183 ◽  
Author(s):  
V.V. Kotlyar ◽  
A.G. Nalimov ◽  
S.S. Stafeev
Keyword(s):  
Topological Charge ◽  
Fdtd Method ◽  
Polarized Light ◽  
Polar Angle ◽  
Optical Vortex ◽  
Circularly Polarized Light ◽  
Circularly Polarized ◽  
Linearly Polarized ◽  
Phase Converter ◽  
Axis Light

Using Jones matrices and vectors, we show that an optical metasurface composed of a set of subwavelength binary diffraction gratings and characterized by an anisotropic transmittance described by a polarization rotation matrix by the angle mφ, where φ is the polar angle, forms an m-th order azimuthally or radially polarized beam when illuminated by linearly polarized light, generating an optical vortex with the topological charge m upon illumination by circularly polarized light. Such a polarization-phase converter (PPC) performs a spin-orbit transformation, similar to that performed by liquid-crystal q-plates. Using a FDTD method, it is numerically shown that when illuminating the PPC by a uniformly (linearly or circularly) polarized field with topological charge m = 2 and then focusing the output beam with a binary zone plate, a reverse on-axis light flow is formed, being comparable in magnitude with the direct optical flow. Moreover, the reverse flows obtained when focusing the circularly polarized optical vortex with the topological charge m = 2 and the second-order polarization vortex are shown to be the same in magnitude.

Topological charge determination of linearly polarized Lorentz-Gaussian vortex beam

Optik ◽  
2017 ◽  
Vol 128 ◽  
pp. 228-234 ◽  
Author(s):  
Qiufang Zhan ◽  
Rongfu Zhang ◽  
Yu Miao ◽  
Guanxue Wang ◽  
Xinmiao Lu ◽  
...  
Keyword(s):  
Topological Charge ◽  
Vortex Beam ◽  
Linearly Polarized ◽  
Charge Determination

scholarly journals Visible-broadband Localized Vector Vortex Beam Generator with a Multi-structure-composited Meta-surface

Nanomaterials ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 166 ◽  
Author(s):  
Zhuo Yang ◽  
Dengfeng Kuang
Keyword(s):  
Quantum Communication ◽  
High Efficiency ◽  
Longitudinal Component ◽  
Vortex Beam ◽  
Graphene Layers ◽  
Visible Light Range ◽  
Polarized Beam ◽  
Linearly Polarized ◽  
Vortex Beams ◽  
Micro Tools

We demonstrate a vortex beam generator meta-surface that consists of silver structures and graphene layers. The miniature material is just a few microns in size and the working part is only a few hundred nanometers thick. With the incidence of the linearly polarized beam, the meta-surface generates high-localized vector vortex beam with a high proportion of the longitudinal component. Being compared with the constituent part of the meta-surface, the multi-structure-combined meta-surface increases the localization by 250% and the longitudinal component proportion by 200%. Moreover, the above artificial material can generate vortex beams in broadband within the visible light range. These novel optical properties have the potential to improve the precision and sensitivity of nanoparticle manipulation. The study serves as a foundation in optical miniaturization and integration, nanoparticle manipulation, high-efficiency optical and quantum communication, and light-driven micro-tools.

Sign in / Sign up

Export Citation Format

Share Document