scholarly journals TheSaccharomyces cerevisiaeSpindle Pole Body (SPB) Component Nbp1p Is Required for SPB Membrane Insertion and Interacts with the Integral Membrane Proteins Ndc1p and Mps2p

2006 ◽  
Vol 17 (4) ◽  
pp. 1959-1970 ◽  
Author(s):  
Yasuhiro Araki ◽  
Corine K. Lau ◽  
Hiromi Maekawa ◽  
Sue L. Jaspersen ◽  
Thomas H. Giddings ◽  
...  
Keyword(s):  
Nuclear Envelope ◽  
Spindle Pole Body ◽  
Integral Membrane Protein ◽  
Spindle Pole ◽  
Membrane Insertion ◽  
Temperature Sensitive ◽  
Pole Body ◽  
Spindle Microtubules ◽  
Sensitive Allele ◽  
Two Hybrid

The spindle pole body (SPB) in Saccharomyces cerevisiae functions to nucleate and organize spindle microtubules, and it is embedded in the nuclear envelope throughout the yeast life cycle. However, the mechanism of membrane insertion of the SPB has not been elucidated. Ndc1p is an integral membrane protein that localizes to SPBs, and it is required for insertion of the SPB into the nuclear envelope during SPB duplication. To better understand the function of Ndc1p, we performed a dosage suppressor screen using the ndc1-39 temperature-sensitive allele. We identified an essential SPB component, Nbp1p. NBP1 shows genetic interactions with several SPB genes in addition to NDC1, and two-hybrid analysis revealed that Nbp1p binds to Ndc1p. Furthermore, Nbp1p is in the Mps2p-Bbp1p complex in the SPB. Immunoelectron microscopy confirmed that Nbp1p localizes to the SPB, suggesting a function at this location. Consistent with this hypothesis, nbp1-td (a degron allele) cells fail in SPB duplication upon depletion of Nbp1p. Importantly, these cells exhibit a “dead” SPB phenotype, similar to cells mutant in MPS2, NDC1, or BBP1. These results demonstrate that Nbp1p is a SPB component that acts in SPB duplication at the point of SPB insertion into the nuclear envelope.

Ultrastructure of somatic mitosis in a diploid strain of the plant pathogenic fungus Cochliobolus sativus

1975 ◽  
Vol 53 (4) ◽  
pp. 403-414 ◽  
Author(s):  
H. C. Huang ◽  
R. D. Tinline ◽  
L. C. Fowke
Keyword(s):  
Nuclear Envelope ◽  
Ultrastructural Study ◽  
Pathogenic Fungus ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Cochliobolus Sativus ◽  
Diploid Strain ◽  
Interphase Nuclei ◽  
Pole Body ◽  
Spindle Microtubules

An ultrastructural study of mitosis in a diploid strain of Cochliobolus sativus showed the event to be intranuclear. Two nucleoli occasionally were present in interphase nuclei. During division the spindle pole body peripheral to the nuclear envelope divided; spindle microtubules radiated into the nucleoplasm from the amorphous granular region abutting the nuclear envelope beneath the bodies; chromosomes condensed at prophase, approached the equatorial plane at metaphase, and moved asynchronously at anaphase; single microtubules appeared attached to kinetochore-like structures. At telophase, nuclei exhibited maximal elongation; fissures of the nuclear envelope appeared in the interzonal region; the nucleolus dispersed. The polar nuclear areas became new daughter nuclei with nucleoli.

scholarly journals Mps3p is a novel component of the yeast spindle pole body that interacts with the yeast centrin homologue Cdc31p

2002 ◽  
Vol 159 (6) ◽  
pp. 945-956 ◽  
Author(s):  
Sue L. Jaspersen ◽  
Thomas H. Giddings ◽  
Mark Winey
Keyword(s):  
Mitotic Spindle ◽  
Spindle Pole Body ◽  
Integral Membrane Protein ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Nonpermissive Temperature ◽  
Reading Frame ◽  
Pole Body ◽  
Monopolar Spindle

Accurate duplication of the Saccharomyces cerevisiae spindle pole body (SPB) is required for formation of a bipolar mitotic spindle. We identified mutants in SPB assembly by screening a temperature-sensitive collection of yeast for defects in SPB incorporation of a fluorescently marked integral SPB component, Spc42p. One SPB assembly mutant contained a mutation in a previously uncharacterized open reading frame that we call MPS3 (for monopolar spindle). mps3-1 mutants arrest in mitosis with monopolar spindles at the nonpermissive temperature, suggesting a defect in SPB duplication. Execution point experiments revealed that MPS3 function is required for the first step of SPB duplication in G1. Like cells containing mutations in two other genes required for this step of SPB duplication (CDC31 and KAR1), mps3-1 mutants arrest with a single unduplicated SPB that lacks an associated half-bridge. MPS3 encodes an essential integral membrane protein that localizes to the SPB half-bridge. Genetic interactions between MPS3 and CDC31 and binding of Cdc31p to Mps3p in vitro, as well as the fact that Cdc31p localization to the SPB is partially dependent on Mps3p function, suggest that one function for Mps3p during SPB duplication is to recruit Cdc31p, the yeast centrin homologue, to the half-bridge.

scholarly journals The Yeast CDC37 Gene Interacts with MPS1 and Is Required for Proper Execution of Spindle Pole Body Duplication

1997 ◽  
Vol 136 (5) ◽  
pp. 969-982 ◽  
Author(s):  
Amy R. Schutz ◽  
Thomas H. Giddings ◽  
Estelle Steiner ◽  
Mark Winey
Keyword(s):  
Spindle Assembly Checkpoint ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
G1 Arrest ◽  
Multicopy Suppressor ◽  
Protein Levels ◽  
Pole Body ◽  
Synthetic Lethal Interactions ◽  
Sensitive Allele

The MPS1 gene from Saccharomyces cerevisiae encodes an essential protein kinase required for spindle pole body (SPB) duplication and for the mitotic spindle assembly checkpoint. Cells with the mps1-1 mutation fail early in SPB duplication and proceed through monopolar mitosis with lethal consequences. We identified CDC37 as a multicopy suppressor of mps1-1 temperature-sensitive growth. Suppression is allele specific, and synthetic lethal interactions occur between mps1 and cdc37 alleles. We examined the cdc37-1 phenotype for defects related to the SPB cycle. The cdc37-1 temperature-sensitive allele causes unbudded, G1 arrest at Start (Reed, S.I. 1980. Genetics. 95: 561–577). Reciprocal shifts demonstrate that cdc37-1 arrest is interdependent with α-factor arrest but is not a normal Start arrest. Although the cells are responsive to α-factor at the arrest, SPB duplication is uncoupled from other aspects of G1 progression and proceeds past the satellite-bearing SPB stage normally seen at Start. Electron microscopy reveals side-by-side SPBs at cdc37-1 arrest. The outer plaque of one SPB is missing or reduced, while the other is normal. Using the mps2-1 mutation to distinguish between the SPBs, we find that the outer plaque defect is specific to the new SPB. This phenotype may arise in part from reduced Mps1p function: although Mps1p protein levels are unaffected by the cdc37-1 mutation, kinase activity is markedly reduced. These data demonstrate a requirement for CDC37 in SPB duplication and suggest a role for this gene in G1 control. CDC37 may provide a chaperone function that promotes the activity of protein kinases.

scholarly journals A Genetic Analysis of Interactions with Spc110p Reveals Distinct Functions of Spc97p and Spc98p, Components of the Yeast γ-Tubulin Complex

1998 ◽  
Vol 9 (8) ◽  
pp. 2201-2216 ◽  
Author(s):  
Thu Nguyen ◽  
Dani B.N. Vinh ◽  
Douglas K. Crawford ◽  
Trisha N. Davis
Keyword(s):  
Spindle Pole Body ◽  
Spindle Pole ◽  
Amino Terminus ◽  
Temperature Sensitive ◽  
Microtubule Organizing Center ◽  
Synthetic Lethal ◽  
Lethal Phenotype ◽  
Amino Terminal ◽  
N Terminus ◽  
Two Hybrid

The spindle pole body (SPB) in Saccharomyces cerevisiae functions as the microtubule-organizing center. Spc110p is an essential structural component of the SPB and spans between the central and inner plaques of this multilamellar organelle. The amino terminus of Spc110p faces the inner plaque, the substructure from which spindle microtubules radiate. We have undertaken a synthetic lethal screen to identify mutations that enhance the phenotype of the temperature-sensitive spc110–221 allele, which encodes mutations in the amino terminus. The screen identified mutations inSPC97 and SPC98, two genes encoding components of the Tub4p complex in yeast. The spc98–63allele is synthetic lethal only with spc110 alleles that encode mutations in the N terminus of Spc110p. In contrast, thespc97 alleles are synthetic lethal withspc110 alleles that encode mutations in either the N terminus or the C terminus. Using the two-hybrid assay, we show that the interactions of Spc110p with Spc97p and Spc98p are not equivalent. The N terminus of Spc110p displays a robust interaction with Spc98p in two different two-hybrid assays, while the interaction between Spc97p and Spc110p is not detectable in one strain and gives a weak signal in the other. Extra copies of SPC98 enhance the interaction between Spc97p and Spc110p, while extra copies of SPC97interfere with the interaction between Spc98p and Spc110p. By testing the interactions between mutant proteins, we show that the lethal phenotype in spc98–63 spc110–221 cells is caused by the failure of Spc98–63p to interact with Spc110–221p. In contrast, the lethal phenotype in spc97–62 spc110–221 cells can be attributed to a decreased interaction between Spc97–62p and Spc98p. Together, these studies provide evidence that Spc110p directly links the Tub4p complex to the SPB. Moreover, an interaction between Spc98p and the amino-terminal region of Spc110p is a critical component of the linkage, whereas the interaction between Spc97p and Spc110p is dependent on Spc98p.

scholarly journals Sfi1p has conserved centrin-binding sites and an essential function in budding yeast spindle pole body duplication

2003 ◽  
Vol 162 (7) ◽  
pp. 1211-1221 ◽  
Author(s):  
John V. Kilmartin
Keyword(s):  
Single Molecule ◽  
Protein A ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Binding Motif ◽  
Temperature Sensitive ◽  
Pole Body ◽  
Human Proteins ◽  
Z Domain ◽  
Essential Function

Centrins are calmodulin-like proteins present in microtubule-organizing centers. The Saccharomyces cerevisiae centrin, Cdc31p, was functionally tagged with a single Z domain of protein A, and used in pull-down experiments to isolate Cdc31p-binding proteins. One of these, Sfi1p, localizes to the half-bridge of the spindle pole body (SPB), where Cdc31p is also localized. Temperature-sensitive mutants in SFI1 show a defect in SPB duplication and genetic interactions with cdc31-1. Sfi1p contains multiple internal repeats that are also present in a Schizosaccharomyces pombe protein, which also localizes to the SPB, and in several human proteins, one of which localizes close to the centriole region. Cdc31p binds directly to individual Sfi1 repeats in a 1:1 ratio, so a single molecule of Sfi1p binds multiple molecules of Cdc31p. The centrosomal human protein containing Sfi1 repeats also binds centrin in the repeat region, showing that this centrin-binding motif is conserved.

Fine structure of the haplosporidan Kernstab, a persistent, intranuclear mitotic apparatus

1975 ◽  
Vol 18 (2) ◽  
pp. 327-346
Author(s):  
F.O. Perkins
Keyword(s):  
Fine Structure ◽  
Nuclear Envelope ◽  
Light Microscope ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Interphase Nuclei ◽  
Mitotic Apparatus ◽  
Pole Body

The fine structure of the haplosporidan mitotic apparatus is described from observations of plasmodial nuclei of Minchinia nelsoni, M. costalis, Minchinia sp., and Urosporidium crescens. The apparatus, which is the Kernstab of light-microscope studies, consists of a bundle of microtubules terminating in a spindle pole body (SPB) at each end of the bundle. A few microtubules extend from SPB to SPB, but most either extend from an SPB and terminate in the nucleoplasm or lie in the nucleoplasm, free of either SPB. The bundle lengthens during mitosis, increasing the SPB-to-SPB distance by a factor of 2 to 3 as compared to interphase nuclei. SPBs are not in contact with the nuclear envelope, being found always in the nucleoplasm which is delimited by the nuclear envelope throughout mitosis. The mitotic apparatus is persistent through interphase, at least in a form which is not significantly different from that found in mitotic nuclei.

scholarly journals A microtubule polymerase cooperates with the kinesin-6 motor and a microtubule cross-linker to promote bipolar spindle assembly in the absence of kinesin-5 and kinesin-14 in fission yeast

2017 ◽  
Vol 28 (25) ◽  
pp. 3647-3659 ◽  
Author(s):  
Masashi Yukawa ◽  
Tomoki Kawakami ◽  
Masaki Okazaki ◽  
Kazunori Kume ◽  
Ngang Heok Tang ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Chromosome Segregation ◽  
Spindle Pole Body ◽  
Spindle Assembly ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Bipolar Spindle ◽  
Pole Body ◽  
Cross Linker ◽  
Spindle Elongation

Accurate chromosome segregation relies on the bipolar mitotic spindle. In many eukaryotes, spindle formation is driven by the plus-end–directed motor kinesin-5 that generates outward force to establish spindle bipolarity. Its inhibition leads to the emergence of monopolar spindles with mitotic arrest. Intriguingly, simultaneous inactivation of the minus-end–directed motor kinesin-14 restores spindle bipolarity in many systems. Here we show that in fission yeast, three independent pathways contribute to spindle bipolarity in the absence of kinesin-5/Cut7 and kinesin-14/Pkl1. One is kinesin-6/Klp9 that engages with spindle elongation once short bipolar spindles assemble. Klp9 also ensures the medial positioning of anaphase spindles to prevent unequal chromosome segregation. Another is the Alp7/TACC-Alp14/TOG microtubule polymerase complex. Temperature-sensitive alp7cut7pkl1 mutants are arrested with either monopolar or very short spindles. Forced targeting of Alp14 to the spindle pole body is sufficient to render alp7cut7pkl1 triply deleted cells viable and promote spindle assembly, indicating that Alp14-mediated microtubule polymerization from the nuclear face of the spindle pole body could generate outward force in place of Cut7 during early mitosis. The third pathway involves the Ase1/PRC1 microtubule cross-linker that stabilizes antiparallel microtubules. Our study, therefore, unveils multifaceted interplay among kinesin-dependent and -independent pathways leading to mitotic bipolar spindle assembly.

The influence of the microtubule inhibitor, methyl benzimidazol-2-yl-carbamate (MBC) on nuclear division and the cell cycle in Saccharomyces cerevisiae

1980 ◽  
Vol 46 (1) ◽  
pp. 341-352
Author(s):  
R.A. Quinlan ◽  
C.I. Pogson ◽  
K. Gull
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Ultrastructural Examination ◽  
Microtubule Inhibitor ◽  
Microtubule Polymerization ◽  
Pole Body ◽  
Outer Component ◽  
Spindle Microtubules

Methyl benzimidazol-2-yl-carbamate (MBC), at a concentration of 100 microM, has a pronounced effect on the growth of Saccharomyces cerevisiae, resulting in the accumulation of cells as large doublets. We have determined a specific execution point for the effect of MBC on the yeast cell cycle, and have shown that this execution point is between the cycle events of spindle pole body duplication and spindle pole body separation. An ultrastructural examination of the MBC-treated cells revealed the absence of cytoplasmic and spindle microtubules. MBC treatment also produced an altered spindle pole body morphology, causing the disappearance of the outer component. Nuclear size was also markedly increased in the MBC-induced doublet cells, although the septa were completely absent from these doublet cells. It is proposed that MBC inhibits microtubule polymerization, rather than causing the depolymerization of stable microtubules.

The essential mitotic target of calmodulin is the 110-kilodalton component of the spindle pole body in Saccharomyces cerevisiae

1993 ◽  
Vol 13 (12) ◽  
pp. 7913-7924
Author(s):  
J R Geiser ◽  
H A Sundberg ◽  
B H Chang ◽  
E G Muller ◽  
T N Davis
Keyword(s):  
Amino Acid ◽  
Sequence Analysis ◽  
Binding Site ◽  
Hybrid System ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Amino Acid Residues ◽  
Calmodulin Binding ◽  
Pole Body ◽  
Two Hybrid

Two independent methods identified the spindle pole body component Nuf1p/Spc110p as the essential mitotic target of calmodulin. Extragenic suppressors of cmd1-1 were isolated and found to define three loci, XCM1, XCM2, and XCM3 (extragenic suppressor of cmd1-1). The gene encoding a dominant suppressor allele of XCM1 was cloned. On the basis of DNA sequence analysis, genetic cosegregation, and mutational analysis, XCM1 was identified as NUF1/SPC110. Independently, a C-terminal portion of Nuf1p/Spc110p, amino acid residues 828 to 944, was isolated as a calmodulin-binding protein by the two-hybrid system. As assayed by the two-hybrid system, Nuf1p/Spc110p interacts with wild-type calmodulin and triple-mutant calmodulins defective in binding Ca2+ but not with two mutant calmodulins that confer a temperature-sensitive phenotype. Deletion analysis by the two-hybrid system mapped the calmodulin-binding site of Nuf1p/Spc110p to amino acid residues 900 to 927. Direct binding between calmodulin and Nuf1p/Spc110p was demonstrated by a modified gel overlay assay. Furthermore, indirect immunofluorescence with fixation procedures known to aid visualization of spindle pole body components localized calmodulin to the spindle pole body. Sequence analysis of five suppressor alleles of NUF1/SPC110 indicated that suppression of cmd1-1 occurs by C-terminal truncation of Nuf1p/Spc110p at amino acid residues 856, 863, or 881, thereby removing the calmodulin-binding site.

Sign in / Sign up

Export Citation Format

Share Document