scholarly journals Anillin-related protein Mid1p coordinates the assembly of the cytokinetic contractile ring in fission yeast

2012 ◽  
Vol 23 (20) ◽  
pp. 3982-3992 ◽  
Author(s):  
Shambaditya Saha ◽  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Myosin Ii ◽  
Equatorial Region ◽  
Yeast Cells ◽  
Related Protein ◽  
Wild Type ◽  
Contractile Ring ◽  
Maturation Period ◽  
Ring Assembly ◽  
Open Questions

In fission yeast cells cortical nodes containing the protein Blt1p and several kinases appear early in G2, mature into cytokinetic nodes by adding anillin Mid1p, myosin-II, formin Cdc12p, and other proteins, and condense into a contractile ring by movements that depend on actin and myosin-II. Previous studies concluded that cells without Mid1p lack cytokinetic nodes and assemble rings unreliably from myosin-II strands but left open questions. Why do strands form outside the equatorial region? Why is ring assembly unreliable without Mid1p? We found in Δmid1 cells that Cdc12p accumulates in cytokinetic nodes scattered in the cortex and produces actin filaments that associate with myosin-II, Rng2p, and Cdc15p to form strands located between the nodes. Strands incorporate nodes, and in ∼67% of cells, strands slowly close into rings that constrict without the normal ∼25-min maturation period. Ring assembly is unreliable and slow without Mid1p because the scattered Cdc12p nodes generate strands spread widely beyond the equator, and growing strands depend on random encounters to merge with other strands into a ring. We conclude that orderly assembly of the contractile ring in wild-type cells depends on Mid1p to recruit myosin-II, Rng2p, and Cdc15p to nodes and to place cytokinetic nodes around the cell equator.

scholarly journals Characterization of structural and functional domains of the anillin-related protein Mid1p that contribute to cytokinesis in fission yeast

2012 ◽  
Vol 23 (20) ◽  
pp. 3993-4007 ◽  
Author(s):  
Shambaditya Saha ◽  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Myosin Ii ◽  
Full Length ◽  
Yeast Cells ◽  
Related Protein ◽  
Contractile Ring ◽  
Structural Domains ◽  
Biophysical Analysis ◽  
Direct Condensation

Fission yeast cells depend on the anillin-related protein Mid1p for reliable cytokinesis. Insolubility limits the purification of full-length Mid1p for biophysical analysis, and lack of knowledge about the structural domains of Mid1p limits functional analysis. We addressed these limitations by identifying in a bacterial expression screen of random Mid1p fragments five soluble segments that can be purified and one insoluble segment. Using complementation experiments in Δmid1 cells, we tested the biological functions of these six putative domains that account for full-length Mid1p. The N-terminal domain (residues 1–149) is essential for correct positioning and orientation of septa. The third domain (residues 309–452) allows the construct composed of the first three domains (residues 1-452) to form hydrodynamically well-behaved octamers. Constructs consisting of residues 1–452 or 1–578 carry out most functions of full-length Mid1p, including concentration at the equatorial cortex in nodes that accumulate myosin-II and other contractile ring proteins during mitosis. However, cells depending on these constructs without the insoluble domain (residues 579–797) form equatorially located rings slowly from strands rather than by direct condensation of nodes. We conclude that residues 1–578 assemble node components myosin-II, Rng2p, and Cdc15p, and the insoluble domain facilitates the normal, efficient condensation of nodes into rings.

scholarly journals Tropomyosin and Myosin-II Cellular Levels Promote Actomyosin Ring Assembly in Fission Yeast

2010 ◽  
Vol 21 (6) ◽  
pp. 989-1000 ◽  
Author(s):  
Benjamin C. Stark ◽  
Thomas E. Sladewski ◽  
Luther W. Pollard ◽  
Matthew Lord
Keyword(s):  
Motor Activity ◽  
Atpase Activity ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Bound State ◽  
Contractile Ring ◽  
Ring Assembly

Myosin-II (Myo2p) and tropomyosin are essential for contractile ring formation and cytokinesis in fission yeast. Here we used a combination of in vivo and in vitro approaches to understand how these proteins function at contractile rings. We find that ring assembly is delayed in Myo2p motor and tropomyosin mutants, but occurs prematurely in cells engineered to express two copies of myo2. Thus, the timing of ring assembly responds to changes in Myo2p cellular levels and motor activity, and the emergence of tropomyosin-bound actin filaments. Doubling Myo2p levels suppresses defects in ring assembly associated with a tropomyosin mutant, suggesting a role for tropomyosin in maximizing Myo2p function. Correspondingly, tropomyosin increases Myo2p actin affinity and ATPase activity and promotes Myo2p-driven actin filament gliding in motility assays. Tropomyosin achieves this by favoring the strong actin-bound state of Myo2p. This mode of regulation reflects a role for tropomyosin in specifying and stabilizing actomyosin interactions, which facilitates contractile ring assembly in the fission yeast system.

scholarly journals The number of cytokinesis nodes in mitotic fission yeast scales with cell volume

2021 ◽  
Author(s):  
Wasim A Sayyad ◽  
Thomas D Pollard
Keyword(s):  
Plasma Membrane ◽  
Fission Yeast ◽  
Large Population ◽  
Yeast Cells ◽  
Wild Type ◽  
Contractile Ring ◽  
Node Number ◽  
Nmt1 Promoter ◽  
Wide Range ◽  
Mutant Cells

Cytokinesis nodes are assemblies of stoichiometric ratios of proteins associated with the plasma membrane, which serve as precursors for the contractile ring during cytokinesis by fission yeast. The total number of nodes is uncertain, because of the limitations of the methods used previously. Here we used the ~140 nm resolution of Airyscan confocal microscopy to resolve a large population of dim, unitary cytokinesis nodes in 3D reconstructions of whole fission yeast cells. Wild-type fission yeast cells make about 200 unitary cytokinesis nodes. Most, but not all of these nodes condense into a contractile ring. The number of cytokinesis nodes scales with cell size in four strains tested, although wide rga4Δ mutant cells form somewhat fewer cytokinesis nodes than expected from the overall trend. The surface density of Pom1 kinase on the plasma membrane around the equators of cells is similar with a wide range of node numbers, so Pom1 does not control cytokinesis node number. However, varying protein concentrations with the nmt1 promoter showed that the numbers of nodes increase above a baseline of about 200 with the total cellular concentration of either Pom1 or the kinase Cdr2.

scholarly journals Transport of Myosin II to the Equatorial Region without Its Own Motor Activity in Mitotic Dictyostelium Cells

1997 ◽  
Vol 8 (10) ◽  
pp. 2089-2099 ◽  
Author(s):  
Shigehiko Yumura ◽  
Taro Q.P. Uyeda
Keyword(s):  
Green Fluorescent Protein ◽  
Motor Activity ◽  
Transport Process ◽  
Time Course ◽  
Fluorescent Protein ◽  
Myosin Ii ◽  
Equatorial Region ◽  
Wild Type ◽  
Contractile Ring ◽  
Green Fluorescent

Fluorescently labeled myosin moved and accumulated circumferentially in the equatorial region of dividingDictyostelium cells within a time course of 4 min, followed by contraction of the contractile ring. To investigate the mechanism of this transport process, we have expressed three mutant myosins that cannot hydrolyze ATP in myosin null cells. Immunofluorescence staining showed that these mutant myosins were also correctly transported to the equatorial region, although no contraction followed. The rates of transport, measured using green fluorescent protein-fused myosins, were indistinguishable between wild-type and mutant myosins. These observations demonstrate that myosin is passively transported toward the equatorial region and incorporated into the forming contractile ring without its own motor activity.

scholarly journals Molecular organization of cytokinesis nodes and contractile rings by super-resolution fluorescence microscopy of live fission yeast

2016 ◽  
Vol 113 (40) ◽  
pp. E5876-E5885 ◽  
Author(s):  
Caroline Laplante ◽  
Fang Huang ◽  
Irene R. Tebbs ◽  
Joerg Bewersdorf ◽  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
High Speed ◽  
Myosin Ii ◽  
Super Resolution ◽  
Molecular Organization ◽  
Yeast Cells ◽  
Contractile Ring ◽  
Actin Ring ◽  
Structural Units ◽  
Iq Motif

Cytokinesis in animals, fungi, and amoebas depends on the constriction of a contractile ring built from a common set of conserved proteins. Many fundamental questions remain about how these proteins organize to generate the necessary tension for cytokinesis. Using quantitative high-speed fluorescence photoactivation localization microscopy (FPALM), we probed this question in live fission yeast cells at unprecedented resolution. We show that nodes, protein assembly precursors to the contractile ring, are discrete structural units with stoichiometric ratios and distinct distributions of constituent proteins. Anillin Mid1p, Fes/CIP4 homology-Bin/amphiphysin/Rvs (F-BAR) Cdc15p, IQ motif containing GTPase-activating protein (IQGAP) Rng2p, and formin Cdc12p form the base of the node that anchors the ends of myosin II tails to the plasma membrane, with myosin II heads extending into the cytoplasm. This general node organization persists in the contractile ring where nodes move bidirectionally during constriction. We observed the dynamics of the actin network during cytokinesis, starting with the extension of short actin strands from nodes, which sometimes connected neighboring nodes. Later in cytokinesis, a broad network of thick bundles coalesced into a tight ring around the equator of the cell. The actin ring was ∼125 nm wide and ∼125 nm thick. These observations establish the organization of the proteins in the functional units of a cytokinetic contractile ring.

scholarly journals Myosin-II reorganization during mitosis is controlled temporally by its dephosphorylation and spatially by Mid1 in fission yeast

2004 ◽  
Vol 165 (5) ◽  
pp. 685-695 ◽  
Author(s):  
Fumio Motegi ◽  
Mithilesh Mishra ◽  
Mohan K. Balasubramanian ◽  
Issei Mabuchi
Keyword(s):  
Fission Yeast ◽  
Myosin Ii ◽  
Phosphorylation Site ◽  
Terminal Region ◽  
Contractile Ring ◽  
Actin Ring ◽  
Division Site ◽  
Ring Assembly ◽  
Medial Cortex ◽  
Early Mitosis

Cytokinesis in many eukaryotes requires an actomyosin contractile ring. Here, we show that in fission yeast the myosin-II heavy chain Myo2 initially accumulates at the division site via its COOH-terminal 134 amino acids independently of F-actin. The COOH-terminal region can access to the division site at early G2, whereas intact Myo2 does so at early mitosis. Ser1444 in the Myo2 COOH-terminal region is a phosphorylation site that is dephosphorylated during early mitosis. Myo2 S1444A prematurely accumulates at the future division site and promotes formation of an F-actin ring even during interphase. The accumulation of Myo2 requires the anillin homologue Mid1 that functions in proper ring placement. Myo2 interacts with Mid1 in cell lysates, and this interaction is inhibited by an S1444D mutation in Myo2. Our results suggest that dephosphorylation of Myo2 liberates the COOH-terminal region from an intramolecular inhibition. Subsequently, dephosphorylated Myo2 is anchored by Mid1 at the medial cortex and promotes the ring assembly in cooperation with F-actin.

scholarly journals Assembly and architecture of precursor nodes during fission yeast cytokinesis

2011 ◽  
Vol 192 (6) ◽  
pp. 1005-1021 ◽  
Author(s):  
Damien Laporte ◽  
Valerie C. Coffman ◽  
I-Ju Lee ◽  
Jian-Qiu Wu
Keyword(s):  
Plasma Membrane ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Stable Node ◽  
Animal Cells ◽  
Contractile Ring ◽  
Cell Interior ◽  
Ring Assembly ◽  
Positional Marker

The contractile ring is essential for cytokinesis in most fungal and animal cells. In fission yeast, cytokinesis nodes are precursors of the contractile ring and mark the future cleavage site. However, their assembly and architecture have not been well described. We found that nodes are assembled stoichiometrically in a hierarchical order with two modules linked by the positional marker anillin Mid1. Mid1 first recruits Cdc4 and IQGAP Rng2 to form module I. Rng2 subsequently recruits the myosin-II subunits Myo2 and Rlc1. Mid1 then independently recruits the F-BAR protein Cdc15 to form module II. Mid1, Rng2, Cdc4, and Cdc15 are stable node components that accumulate close to the plasma membrane. Both modules recruit the formin Cdc12 to nucleate actin filaments. Myo2 heads point into the cell interior, where they efficiently capture actin filaments to condense nodes into the contractile ring. Collectively, our work characterizing the assembly and architecture of precursor nodes defines important steps and molecular players for contractile ring assembly.

scholarly journals Counting actin in contractile rings reveals novel contributions of cofilin and type II myosins to fission yeast cytokinesis

2021 ◽  
Author(s):  
Qian Chen ◽  
Mamata Malla ◽  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Actin Filaments ◽  
Yeast Cells ◽  
Type Ii ◽  
Wild Type ◽  
Contractile Ring ◽  
Peak Number ◽  
Ring Constriction ◽  
Proportional Increase ◽  
Mutant Cells

Cytokinesis by animals, fungi and amoebas depends on actomyosin contractile rings, which are stabilized by continuous turnover of actin filaments. Remarkably little is known about the amount of polymerized actin in contractile rings, so we used low concentration of GFP-Lifeact to count total polymerized actin molecules in the contractile rings of live fission yeast cells. Contractile rings of wild-type cells accumulated polymerized actin molecules at 4,900/min to a peak number of ~198,000 followed by a loss of actin at 5,400/min throughout ring constriction. In adf1-M3 mutant cells with cofilin that severs actin filaments poorly, contractile rings accumulated polymerized actin at twice the normal rate and eventually had almost two-fold more actin along with a proportional increase in type II myosins Myo2, Myp2 and formin Cdc12. Although 30% of adf1-M3 mutant cells failed to constrict their rings fully, the rest lost actin from the rings at the wild-type rates. Mutations of type II myosins Myo2 and Myp2 reduced contractile ring actin filaments by half and slowed the rate of actin loss from the rings.

scholarly journals Counting actin in contractile rings reveals novel contributions of cofilin and type II myosins to fission yeast cytokinesis

2021 ◽  
Author(s):  
Mamata Malla ◽  
Thomas D. Pollard ◽  
Qian Chen
Keyword(s):  
Fission Yeast ◽  
Actin Filaments ◽  
Yeast Cells ◽  
Type Ii ◽  
Wild Type ◽  
Contractile Ring ◽  
Peak Number ◽  
Ring Constriction ◽  
Proportional Increase ◽  
Mutant Cells

Cytokinesis by animals, fungi and amoebas depends on actomyosin contractile rings, which are stabilized by continuous turnover of actin filaments. Remarkably little is known about the amount of polymerized actin in contractile rings, so we used low concentration of GFP-Lifeact to count total polymerized actin molecules in the contractile rings of live fission yeast cells. Contractile rings of wild-type cells accumulated polymerized actin molecules at 4,900/min to a peak number of ∼198,000 followed by a loss of actin at 5,400/min throughout ring constriction. In adf1-M3 mutant cells with cofilin that severs actin filaments poorly, contractile rings accumulated polymerized actin at twice the normal rate and eventually had almost two-fold more actin along with a proportional increase in type II myosins Myo2, Myp2 and formin Cdc12. Although 30% of adf1-M3 mutant cells failed to constrict their rings fully, the rest lost actin from the rings at the wild-type rates. Mutations of type II myosins Myo2 and Myp2 reduced contractile ring actin filaments by half and slowed the rate of actin loss from the rings.

scholarly journals Actin-depolymerizing Protein Adf1 Is Required for Formation and Maintenance of the Contractile Ring during Cytokinesis in Fission Yeast

2006 ◽  
Vol 17 (4) ◽  
pp. 1933-1945 ◽  
Author(s):  
Kentaro Nakano ◽  
Issei Mabuchi
Keyword(s):  
Actin Cytoskeleton ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Yeast Cells ◽  
Contractile Ring ◽  
Capping Protein ◽  
Division Site ◽  
Family Protein

The role of the actin-depolymerizing factor (ADF)/cofilin-family protein Adf1 in cytokinesis of fission yeast cells was studied. Adf1 was required for accumulation of actin at the division site by depolymerizing actin at the cell ends, assembly of the contractile ring through severing actin filaments, and maintenance of the contractile ring once formed. Genetic and cytological analyses suggested that it collaborates with profilin and capping protein in the mitotic reorganization of the actin cytoskeleton. Furthermore, it was unexpectedly found that Adf1 and myosin-II also collaborate in assembling the contractile ring. Tropomyosin was shown to antagonize the function of Adf1 in the contractile ring. We propose that formation and maintenance of the contractile ring are achieved by a balanced collaboration of these proteins.

Sign in / Sign up

Export Citation Format

Share Document