scholarly journals De novo genome assembly of the tobacco hornworm moth (Manduca sexta)

2021 ◽  
Vol 11 (1) ◽  
pp. 1-9
Author(s):  
Ariel Gershman ◽  
Tatiana G Romer ◽  
Yunfan Fan ◽  
Roham Razaghi ◽  
Wendy A Smith ◽  
...  
Keyword(s):  
Manduca Sexta ◽  
Reference Genome ◽  
De Novo ◽  
Model Organism ◽  
Tobacco Hornworm ◽  
Model System ◽  
Future Research ◽  
De Novo Genome Assembly ◽  
Lepidopteran Insect ◽  
Modern Technologies

Abstract The tobacco hornworm, Manduca sexta, is a lepidopteran insect that is used extensively as a model system for studying insect biology, development, neuroscience, and immunity. However, current studies rely on the highly fragmented reference genome Msex_1.0, which was created using now-outdated technologies and is hindered by a variety of deficiencies and inaccuracies. We present a new reference genome for M. sexta, JHU_Msex_v1.0, applying a combination of modern technologies in a de novo assembly to increase continuity, accuracy, and completeness. The assembly is 470 Mb and is ∼20× more continuous than the original assembly, with scaffold N50 > 14 Mb. We annotated the assembly by lifting over existing annotations and supplementing with additional supporting RNA-based data for a total of 25,256 genes. The new reference assembly is accessible in annotated form for public use. We demonstrate that improved continuity of the M. sexta genome improves resequencing studies and benefits future research on M. sexta as a model organism.

scholarly journals De novo genome assembly of the Tobacco Hornworm moth (Manduca sexta)

2020 ◽  
Author(s):  
Ariel Gershman ◽  
Tatiana Gelaf Romer ◽  
Yunfan Fan ◽  
Roham Razaghi ◽  
Wendy A. Smith ◽  
...  
Keyword(s):  
Manduca Sexta ◽  
Reference Genome ◽  
De Novo ◽  
Model Organism ◽  
Tobacco Hornworm ◽  
Model System ◽  
Future Research ◽  
De Novo Genome Assembly ◽  
Lepidopteran Insect ◽  
Modern Technologies

AbstractThe Tobacco hornworm, Manduca sexta, is a lepidopteran insect that is used extensively as a model system for studying insect biology, development, neuroscience and immunity. However, current studies rely on the highly fragmented reference genome Msex_1.0, which was created using now-outdated technologies and is hindered by a variety of deficiencies and inaccuracies. We present the new reference genome for M. sexta, JHU_Msex_v1.0, applying a combination of modern technologies in a de novo assembly to increase continuity, accuracy, and completeness. The assembly is 470 Mb and is ~20x more continuous than the original assembly, with scaffold N50 >14 Mb. We annotated the assembly by lifting over existing annotations and supplementing with additional supporting RNA-based data for a total of 25,256 genes. The new reference assembly is accessible in annotated form for public use. We demonstrate that improved continuity of the M. sexta genome improves resequencing studies and benefits future research on M. sexta as a model organism.

scholarly journals In Search of Species-Specific SNPs in a Non-Model Animal (European Bison (Bison bonasus))—Comparison of De Novo and Reference-Based Integrated Pipeline of STACKS Using Genotyping-by-Sequencing (GBS) Data

Animals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2226
Author(s):  
Sazia Kunvar ◽  
Sylwia Czarnomska ◽  
Cino Pertoldi ◽  
Małgorzata Tokarska
Keyword(s):  
Reference Genome ◽  
De Novo ◽  
Bos Taurus ◽  
Model Organism ◽  
Genotyping By Sequencing ◽  
Model Organisms ◽  
European Bison ◽  
Model Animal ◽  
Pcr Duplicates ◽  
Species Specific

The European bison is a non-model organism; thus, most of its genetic and genomic analyses have been performed using cattle-specific resources, such as BovineSNP50 BeadChip or Illumina Bovine 800 K HD Bead Chip. The problem with non-specific tools is the potential loss of evolutionary diversified information (ascertainment bias) and species-specific markers. Here, we have used a genotyping-by-sequencing (GBS) approach for genotyping 256 samples from the European bison population in Bialowieza Forest (Poland) and performed an analysis using two integrated pipelines of the STACKS software: one is de novo (without reference genome) and the other is a reference pipeline (with reference genome). Moreover, we used a reference pipeline with two different genomes, i.e., Bos taurus and European bison. Genotyping by sequencing (GBS) is a useful tool for SNP genotyping in non-model organisms due to its cost effectiveness. Our results support GBS with a reference pipeline without PCR duplicates as a powerful approach for studying the population structure and genotyping data of non-model organisms. We found more polymorphic markers in the reference pipeline in comparison to the de novo pipeline. The decreased number of SNPs from the de novo pipeline could be due to the extremely low level of heterozygosity in European bison. It has been confirmed that all the de novo/Bos taurus and Bos taurus reference pipeline obtained SNPs were unique and not included in 800 K BovineHD BeadChip.

scholarly journals De Novo Sequencing, Assembly, and Annotation of Four Threespine Stickleback Genomes Based on Microfluidic Partitioned DNA Libraries

Genes ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 426 ◽  
Author(s):  
Daniel Berner ◽  
Marius Roesti ◽  
Steven Bilobram ◽  
Simon K. Chan ◽  
Heather Kirk ◽  
...  
Keyword(s):  
Reference Genome ◽  
De Novo ◽  
Gene Annotation ◽  
Model System ◽  
Threespine Stickleback ◽  
Evolutionary Genomics ◽  
Digital Repository ◽  
High Quality ◽  
De Novo Gene ◽  
Dna Libraries

The threespine stickleback is a geographically widespread and ecologically highly diverse fish that has emerged as a powerful model system for evolutionary genomics and developmental biology. Investigations in this species currently rely on a single high-quality reference genome, but would benefit from the availability of additional, independently sequenced and assembled genomes. We present here the assembly of four new stickleback genomes, based on the sequencing of microfluidic partitioned DNA libraries. The base pair lengths of the four genomes reach 92–101% of the standard reference genome length. Together with their de novo gene annotation, these assemblies offer a resource enhancing genomic investigations in stickleback. The genomes and their annotations are available from the Dryad Digital Repository (https://doi.org/10.5061/dryad.113j3h7).

scholarly journals dnAQET: a framework to compute a consolidated metric for benchmarking quality of de novo assemblies

BMC Genomics ◽  
2019 ◽  
Vol 20 (1) ◽  
Author(s):  
Gokhan Yavas ◽  
Huixiao Hong ◽  
Wenming Xiao
Keyword(s):  
Quality Assessment ◽  
Genome Assembly ◽  
Reference Genome ◽  
De Novo ◽  
Quality Score ◽  
De Novo Genome Assembly ◽  
Genome Assemblies ◽  
Reference Genomes ◽  
Better Than

Abstract Background Accurate de novo genome assembly has become reality with the advancements in sequencing technology. With the ever-increasing number of de novo genome assembly tools, assessing the quality of assemblies has become of great importance in genome research. Although many quality metrics have been proposed and software tools for calculating those metrics have been developed, the existing tools do not produce a unified measure to reflect the overall quality of an assembly. Results To address this issue, we developed the de novo Assembly Quality Evaluation Tool (dnAQET) that generates a unified metric for benchmarking the quality assessment of assemblies. Our framework first calculates individual quality scores for the scaffolds/contigs of an assembly by aligning them to a reference genome. Next, it computes a quality score for the assembly using its overall reference genome coverage, the quality score distribution of its scaffolds and the redundancy identified in it. Using synthetic assemblies randomly generated from the latest human genome build, various builds of the reference genomes for five organisms and six de novo assemblies for sample NA24385, we tested dnAQET to assess its capability for benchmarking quality evaluation of genome assemblies. For synthetic data, our quality score increased with decreasing number of misassemblies and redundancy and increasing average contig length and coverage, as expected. For genome builds, dnAQET quality score calculated for a more recent reference genome was better than the score for an older version. To compare with some of the most frequently used measures, 13 other quality measures were calculated. The quality score from dnAQET was found to be better than all other measures in terms of consistency with the known quality of the reference genomes, indicating that dnAQET is reliable for benchmarking quality assessment of de novo genome assemblies. Conclusions The dnAQET is a scalable framework designed to evaluate a de novo genome assembly based on the aggregated quality of its scaffolds (or contigs). Our results demonstrated that dnAQET quality score is reliable for benchmarking quality assessment of genome assemblies. The dnQAET can help researchers to identify the most suitable assembly tools and to select high quality assemblies generated.

scholarly journals Intraspecific Diversity of Fission Yeast Mitochondrial Genomes

2019 ◽  
Vol 11 (8) ◽  
pp. 2312-2329 ◽  
Author(s):  
Yu-Tian Tao ◽  
Fang Suo ◽  
Sergio Tusso ◽  
Yan-Kai Wang ◽  
Song Huang ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Population Genomics ◽  
De Novo ◽  
Model Organism ◽  
Nuclear Genome ◽  
Intraspecific Diversity ◽  
Future Research ◽  
Data Sets ◽  
Diversity Pattern ◽  
Mitochondrial Introns

Abstract The fission yeast Schizosaccharomyces pombe is an important model organism, but its natural diversity and evolutionary history remain under-studied. In particular, the population genomics of the S. pombe mitochondrial genome (mitogenome) has not been thoroughly investigated. Here, we assembled the complete circular-mapping mitogenomes of 192 S. pombe isolates de novo, and found that these mitogenomes belong to 69 nonidentical sequence types ranging from 17,618 to 26,910 bp in length. Using the assembled mitogenomes, we identified 20 errors in the reference mitogenome and discovered two previously unknown mitochondrial introns. Analyzing sequence diversity of these 69 types of mitogenomes revealed two highly distinct clades, with only three mitogenomes exhibiting signs of inter-clade recombination. This diversity pattern suggests that currently available S. pombe isolates descend from two long-separated ancestral lineages. This conclusion is corroborated by the diversity pattern of the recombination-repressed K-region located between donor mating-type loci mat2 and mat3 in the nuclear genome. We estimated that the two ancestral S. pombe lineages diverged about 31 million generations ago. These findings shed new light on the evolution of S. pombe and the data sets generated in this study will facilitate future research on genome evolution.

scholarly journals De novo assembly of the cattle reference genome with single-molecule sequencing

GigaScience ◽  
2020 ◽  
Vol 9 (3) ◽  
Author(s):  
Benjamin D Rosen ◽  
Derek M Bickhart ◽  
Robert D Schnabel ◽  
Sergey Koren ◽  
Christine G Elsik ◽  
...  
Keyword(s):  
Single Molecule ◽  
De Novo Assembly ◽  
Reference Genome ◽  
De Novo ◽  
Bos Taurus ◽  
Future Research ◽  
Protein Coding ◽  
Single Molecule Sequencing ◽  
Assembly Accuracy ◽  
Genomic Tools

Abstract Background Major advances in selection progress for cattle have been made following the introduction of genomic tools over the past 10–12 years. These tools depend upon the Bos taurus reference genome (UMD3.1.1), which was created using now-outdated technologies and is hindered by a variety of deficiencies and inaccuracies. Results We present the new reference genome for cattle, ARS-UCD1.2, based on the same animal as the original to facilitate transfer and interpretation of results obtained from the earlier version, but applying a combination of modern technologies in a de novo assembly to increase continuity, accuracy, and completeness. The assembly includes 2.7 Gb and is >250× more continuous than the original assembly, with contig N50 >25 Mb and L50 of 32. We also greatly expanded supporting RNA-based data for annotation that identifies 30,396 total genes (21,039 protein coding). The new reference assembly is accessible in annotated form for public use. Conclusions We demonstrate that improved continuity of assembled sequence warrants the adoption of ARS-UCD1.2 as the new cattle reference genome and that increased assembly accuracy will benefit future research on this species.

scholarly journals Illumina TruSeq synthetic long-reads empowerde novoassembly and resolve complex, highly repetitive transposable elements

2014 ◽  
Author(s):  
Rajiv C McCoy ◽  
Ryan W Taylor ◽  
Timothy A Blauwkamp ◽  
Joanna L Kelley ◽  
Michael Kertesz ◽  
...  
Keyword(s):  
Transposable Elements ◽  
Reference Genome ◽  
De Novo ◽  
Model Organism ◽  
Genomic Analysis ◽  
High Sequence Identity ◽  
Current Reference ◽  
Sequencing Technologies ◽  
Long Reads ◽  
Whole Genomes

High-throughput DNA sequencing technologies have revolutionized genomic analysis, including thede novoassembly of whole genomes. Nevertheless, assembly of complex genomes remains challenging, in part due to the presence of dispersed repeats which introduce ambiguity during genome reconstruction. Transposable elements (TEs) can be particularly problematic, especially for TE families exhibiting high sequence identity, high copy number, or present in complex genomic arrangements. While TEs strongly affect genome function and evolution, most currentde novoassembly approaches cannot resolve long, identical, and abundant families of TEs. Here, we applied a novel Illumina technology called TruSeq synthetic long-reads, which are generated through highly parallel library preparation and local assembly of short read data and achieve lengths of 1.5-18.5 Kbp with an extremely low error rate (∼0.03% per base). To test the utility of this technology, we sequenced and assembled the genome of the model organismDrosophila melanogaster(reference genome strainy;cn,bw,sp) achieving an N50 contig size of 69.7 Kbp and covering 96.9% of the euchromatic chromosome arms of the current reference genome. TruSeq synthetic long-read technology enables placement of individual TE copies in their proper genomic locations as well as accurate reconstruction of TE sequences. We entirely recovered and accurately placed 4,229 (77.8%) of the 5,434 of annotated transposable elements with perfect identity to the current reference genome. As TEs are ubiquitous features of genomes of many species, TruSeq synthetic long- reads, and likely other methods that generate long reads, offer a powerful approach to improvede novoassemblies of whole genomes.

scholarly journals Improved Apis mellifera reference genome based on the alternative long-read-based assemblies

2021 ◽  
Author(s):  
Milyausha Kaskinova ◽  
Bayazit Yunusbayev ◽  
Radick Altinbaev ◽  
Rika Raffiudin ◽  
Madeline H. Carpenter ◽  
...  
Keyword(s):  
Apis Mellifera ◽  
Honey Bee ◽  
Reference Genome ◽  
De Novo ◽  
Gene Annotation ◽  
Model Organism ◽  
Functional Genomic ◽  
Long Read ◽  
Chromosome Level

ABSTRACTApis mellifera L., the western honey bee is a major crop pollinator that plays a key role in beekeeping and serves as an important model organism in social behavior studies. Recent efforts have improved on the quality of the honey bee reference genome and developed a chromosome-level assembly of sixteen chromosomes, two of which are gapless. However, the rest suffer from 51 gaps, 160 unplaced/unlocalized scaffolds, and the lack of 2 distal telomeres. The gaps are located at the hard-to-assemble extended highly repetitive chromosomal regions that may contain functional genomic elements. Here, we use de-novo re-assemblies from the most recent reference genome Amel_HAv_3.1 raw reads and other long-read-based assemblies (INRA_AMelMel_1.0, ASM1384120v1, and ASM1384124v1) of the honey bee genome to resolve 13 gaps, five unplaced/unlocalized scaffolds and, the lacking telomeres of the Amel_HAv_3.1. The total length of the resolved gaps is 848,747 bp. The accuracy of the corrected assembly was validated by mapping PacBio reads and performing gene annotation assessment. Comparative analysis suggests that the PacBio-reads-based assemblies of the honey bee genomes failed in the same highly repetitive extended regions of the chromosomes, especially on chromosome 10. To fully resolve these extended repetitive regions, further work using ultra-long Nanopore sequencing would be needed. Our updated assembly facilitates more accurate reference-guided scaffolding and marker/sequence mapping in honey bee genomics studies.

scholarly journals Patching holes in the Chlamydomonas genome

2015 ◽  
Author(s):  
Frej Tulin ◽  
Frederick R. Cross
Keyword(s):  
Genomic Dna ◽  
Reference Genome ◽  
Bioinformatics Analysis ◽  
De Novo ◽  
Model Organism ◽  
Evolutionary Conservation ◽  
Reference Genome Assembly ◽  
Splice Junctions ◽  
Exonic Sequence ◽  
Unknown Sequence

The Chlamydomonas genome has been sequenced, assembled and annotated to produce a rich resource for genetics and molecular biology in this well-studied model organism. However, the current reference genome contains ~1000 blocks of unknown sequence (‘N-islands’), which are frequently placed in introns of annotated gene models. We developed a strategy, using careful bioinformatics analysis of short-sequence cDNA and genomic DNA reads, to search for previously unknown exons hidden within such blocks, and determine the sequence and exon/intron boundaries of such exons. These methods are based on assembly and alignment completely independent of prior reference assembly or reference annotation. Our evidence indicates that ~one-quarter of the annotated intronic N-islands actually contain hidden exons. For most of these our algorithm recovers full exonic sequence with associated splice junctions and exon-adjacent intron sequence, that can be joined to the reference genome assembly and annotated transcript models. These new exons represent de novo sequence generally present nowhere in the assembled genome, and the added sequence can be shown in many cases to greatly improve evolutionary conservation of the predicted encoded peptides. At the same time, our results confirm the purely intronic status for a substantial majority of N-islands annotated as intronic in the reference annotated genome, increasing confidence in this valuable resource.

Sign in / Sign up

Export Citation Format

Share Document