scholarly journals The controls on earthquake ground motion in foreland-basin settings: The effects of basin and source geometry

2020 ◽  
Author(s):  
Aisling O’Kane ◽  
Alex Copley
Keyword(s):  
Ground Motion ◽  
Large Population ◽  
Foreland Basin ◽  
Relative Length ◽  
Earthquake Ground Motion ◽  
Source Depth ◽  
Dominant Wavelength ◽  
Ground Shaking ◽  
Source Characteristics ◽  
Basin Structure

Summary Rapid urban growth has led to large population densities in foreland basin regions, and therefore a rapid increase in the number of people exposed to hazard from earthquakes in the adjacent mountain ranges. It is well known that earthquake-induced ground shaking is amplified in sedimentary basins. However, questions remain regarding the main controls on this effect. It is, therefore, crucial to identify the main controls on earthquake shaking in foreland basins as a step towards mitigating the earthquake risk posed to these regions. We model seismic-wave propagation from range-front thrust-faulting earthquakes in a foreland-basin setting. The basin geometry (depth and width) and source characteristics (fault dip and source-to-basin distance) were varied, and the resultant ground motion was calculated. We find that the source depth determines the amount of near-source ground shaking and the basin structure controls the propagation of this energy into the foreland basin. Of particular importance is the relative length scales of the basin depth and dominant seismic wavelength (controlled by the source characteristics), as this controls the amount of dispersion of surface-wave energy, and so the amplitude and duration of ground motion. The maximum ground motions occur when the basin depth matches the dominant wavelength set by the source. Basins that are shallow compared with the dominant wavelength result in low-amplitude and long-duration dispersed waveforms. However, the basin structure has a smaller effect on the ground shaking than the source depth and geometry, highlighting the need for understanding the depth distribution and dip angles of earthquakes when assessing earthquake hazard in foreland-basin settings.

High-frequency ground-motion variability for rough-fault ruptures  

2021 ◽  
Author(s):  
Jagdish Chandra Vyas ◽  
Martin Galis ◽  
Paul Martin Mai
Keyword(s):  
Ground Motion ◽  
Large Scale ◽  
Earthquake Ground Motion ◽  
Small Scale ◽  
Dynamic Rupture ◽  
Roughness Effects ◽  
Ground Shaking ◽  
Fault Surface ◽  
Fault Roughness ◽  
Ground Motion Variability

<p>Geological observations show variations in fault-surface topography not only at large scale (segmentation) but also at small scale (roughness). These geometrical complexities strongly affect the stress distribution and frictional strength of the fault, and therefore control the earthquake rupture process and resulting ground-shaking. Previous studies examined fault-segmentation effects on ground-shaking, but our understanding of fault-roughness effects on seismic wavefield radiation and earthquake ground-motion is still limited.  </p><p>In this study we examine the effects of fault roughness on ground-shaking variability as a function of distance based on 3D dynamic rupture simulations. We consider linear slip-weakening friction, variations of fault-roughness parametrizations, and alternative nucleation positions (unilateral and bilateral ruptures). We use generalized finite difference method to compute synthetic waveforms (max. resolved frequency 5.75 Hz) at numerous surface sites  to carry out statistical analysis.  </p><p>Our simulations reveal that ground-motion variability from unilateral ruptures is almost independent of  distance from the fault, with comparable or higher values than estimates from ground-motion prediction equations (e.g., Boore and Atkinson, 2008; Campbell and Bozornia, 2008). However, ground-motion variability from bilateral ruptures decreases with increasing distance, in contrast to previous studies (e.g., Imtiaz et. al., 2015) who observe an increasing trend with distance. Ground-shaking variability from unilateral ruptures is higher than for bilateral ruptures, a feature due to intricate seismic radiation patterns related to fault roughness and hypocenter location. Moreover, ground-shaking variability for rougher faults is lower than for smoother faults. As fault roughness increases the difference in ground-shaking variabilities between unilateral and bilateral ruptures increases. In summary, our simulations help develop a fundamental understanding of ground-motion variability at high frequencies (~ 6 Hz) due small-scale geometrical fault-surface variations.</p>

Ground-response maps for Tonopah, Nevada

1978 ◽  
Vol 68 (2) ◽  
pp. 451-469
Author(s):  
Walter W. Hays
Keyword(s):  
Ground Motion ◽  
Test Site ◽  
Earthquake Ground Motion ◽  
Nevada Test Site ◽  
Ground Response ◽  
Period Range ◽  
Ground Shaking ◽  
Motion Data ◽  
The City ◽  
Made In

Abstract Ground-response maps for Tonopah, Nevada, were prepared using ground-motion data from a Nevada Test Site explosion recorded on a 12-station seismic array in Tonopah. These data were used to define 10 frequency-dependent ground-response maps for the period range 0.05 to 2.5 sec. These data were combined with the probabilistic calculation of earthquake ground accelerations on rock sites in the Tonopah area, made in a 1976 study by S. T. Algermissen and D. M. Perkins, in order to give estimates of the ground shaking expected throughout the city in a 50-yr period of time, at the 90 per cent probability level. Although these relative ground-response estimates are based on low-strain data, they provide a preliminary basis for delineating geographic areas with different susceptibilities to earthquake ground shaking until the time that high-strain earthquake ground-motion measurements become available in Tonopah.

Survey of Fragile Geologic Features and Their Quasi-Static Earthquake Ground-Motion Constraints, Southern Oregon

2021 ◽  
Author(s):  
Devin McPhillips ◽  
Katherine M. Scharer
Keyword(s):  
Ground Motion ◽  
Pacific Northwest ◽  
Field Measurements ◽  
Point Clouds ◽  
Earthquake Ground Motion ◽  
Ground Shaking ◽  
Motion Constraints ◽  
Megathrust Earthquakes ◽  
The Pacific ◽  
Rock Pillars

ABSTRACT Fragile geologic features (FGFs), which are extant on the landscape but vulnerable to earthquake ground shaking, may provide geological constraints on the intensity of prior shaking. These empirical constraints are particularly important in regions such as the Pacific Northwest that have not experienced a megathrust earthquake in written history. Here, we describe our field survey of FGFs in southern Oregon. We documented 58 features with fragile geometric characteristics, as determined from field measurements of size and strength, historical photographs, and light detection and ranging point clouds. Among the surveyed FGFs, sea stacks have particular advantages for use as ground-motion constraints: (1) they are frequently tall and thin; (2) they are widely distributed parallel to the coast, proximal to the trench and the likely megathrust rupture surface; and (3) they are formed by sea cliff retreat, meaning that their ages may be coarsely estimated as a function of distance from the coast. About 40% of the surveyed sea stacks appear to have survived multiple Cascadia megathrust earthquakes. Using a quasi-static analysis, we estimate the minimum horizontal ground accelerations that could fracture the rock pillars. We provide context for the quasi-static results by comparing them with predictions from kinematic simulations and ground-motion prediction equations. Among the sea stacks old enough to have survived multiple megathrust earthquakes (n = 16), eight yield breaking accelerations lower than the predictions, although they generally overlap within uncertainty. FGFs with the lowest breaking accelerations are distributed uniformly over 130 km of coastline. Results for inland features, such as speleothems, are in close agreement with the predictions. We conclude that FGFs show promise for investigating both past earthquake shaking and its spatial variability along the coasts of Oregon and Washington, where sea stacks are often prevalent. Future work can refine our understanding of FGF age and evolution.

EARTHQUAKE GROUND MOTION SIMULATION THROUGH THE 2-D SPECTRAL ELEMENT METHOD

2001 ◽  
Vol 09 (04) ◽  
pp. 1561-1581 ◽  
Author(s):  
ENRICO PRIOLO
Keyword(s):  
Wave Propagation ◽  
Ground Motion ◽  
Spectral Element Method ◽  
Spectral Element ◽  
Point Sources ◽  
Earthquake Ground Motion ◽  
Computational Domain ◽  
Near Surface ◽  
Ground Shaking ◽  
Element Method

The application of the 2-D Chebyshev spectral element method (SPEM) to engineering seismology problems is reviewed in this paper. The SPEM is a high-order finite element technique which solves the variational formulation of the seismic wave propagation equations. The computational domain is discretised into an unstructured grid composed by irregular quadrilateral elements. This property makes the SPEM particularly suitable to compute numerically accurate solutions of the full wave equations in complex media. The earthquake is simulated following an approach that can be considered "global", that is all the factors influencing the wave propagation — source, crustal heterogeneity, fine details of the near-surface structure, and topography — are taken into account and solved simultaneously. The basic earthquake source is represented by a 2-D point double couple model. Ruptures propagating along fault segments placed on the model plane are simulated as a finite summation of elementary point sources. After a general introduction, the paper first gives an overview of the method; then it concentrates on some methodological topics of interest for practical applications, such as quadrangular mesh generation, source definition and scaling, numerical accuracy and computational efficiency. Limitations and advantages of using a 2-D approach, although sophisticated such as the SPEM, are addressed, as well. The effectiveness of the method is illustrated through two case histories, i.e. the ground shaking prediction in Catania (Sicily, Italy) for a catastrophic earthquake, and the analysis of the ground motion in the presence of a massive structure.

scholarly journals Investigating the Behavior of Buildings under the Effect of the New Design Ground Motion of Iraq

2019 ◽  
Vol 5 (2) ◽  
pp. 466
Author(s):  
Mustafa Shakir Farman ◽  
AbdulMuttalib Isa Said
Keyword(s):  
Ground Motion ◽  
Performance Level ◽  
Nonlinear Static Analysis ◽  
Life Safety ◽  
Earthquake Ground Motion ◽  
Moment Frame ◽  
Cross Sectional ◽  
Ground Shaking ◽  
Building Height ◽  
Frame System

Recently, Iraq has experienced an increase in seismic activity, especially, near the east boundary with Iran which enhanced the need to study its effect on the behavior of buildings. In this study, a comprehensive methodology was applied to investigate the behavior of a moment frame system with respect to its height after subjected to the design ground motion at Baghdad according to the recently developed seismic hazard maps and, after developing and designing the required configurations of archetype models, specifying life safety as an aimed performance level, modeling nonlinearity and applying the nonlinear static analysis (NSP) according to ASCE/SEI41-13, FEMA356 and FEMA P-695. This methodology is started by sizing members cross-sectional dimensions and applying reinforcement detailing requirements according to ACI318-14. Results show that, for a given building height and number of bays, inelastic drifts increase with decreasing the bay width because the overall building stiffness is decreased and it will be more slender, and consequently, the P- delta effects increased. Also, as the building height increased, both, target and minimum shear capacities decrease and the target displacement increases under the effect of the same earthquake ground motion. Consequently, a necessary limitation on the height of these buildings were deduced to ensure their ability to withstand the future ground shaking and, in the same time, maintaining the life safety performance level of damage. Where, it is found that the maximum allowed heights of framed buildings in Baghdad are 17, 25 and 32 stories for 6, 7.5 and 9 m bay widths, respectively.

scholarly journals 3D NUMERICAL MODELLING OF THE SEISMIC RESPONSE OF THE THESSALONIKI URBAN AREA: THE CASE OF THE 1978 VOLVI EARTHQUAKE

2017 ◽  
Vol 50 (3) ◽  
pp. 1433
Author(s):  
C. Smerzini ◽  
K. Pitilakis ◽  
K. Hashemi
Keyword(s):  
Numerical Modelling ◽  
Urban Area ◽  
Ground Motion ◽  
Large Scale ◽  
Spectral Element ◽  
Seismic Wave Propagation ◽  
Earthquake Ground Motion ◽  
Ground Shaking ◽  
3D Numerical Modelling ◽  
Wide Scale

This study aims at showing the numerical modelling of earthquake ground motion in the Thessaloniki urban area, using a 3D spectral element approach. The availability of detailed geotechnical/geophysical data together with the seismological information regarding the relevant fault sources allowed us to construct a large-scale 3D numerical model suitable for generating physics based ground shaking scenarios within the city of Thessaloniki up to maximum frequencies of about 2 Hz. Results of the numerical simulation of the destructive MW6.5 1978 Volvi earthquake are addressed, showing that realistic estimates can be obtained. Shaking maps in terms of ground motion parameters such as PGV are used to discuss the main seismic wave propagation effects at a wide scale.

Sign in / Sign up

Export Citation Format

Share Document