Reducing the lateral displacement of lead rubber bearing isolators under the near field earthquakes by crosswise dissipaters connected to rigid support structure

The purpose of base isolation is to absorb earthquake energy, prolong the life of the structure, and enable the structure to be similar to a rigid body. However, since resonance can occur due to the closeness of the period of structures to the long period and large velocity pulses of the near field earthquakes, the stability of these buildings greatly reduces, and with the large displacement above isolation level, sometimes, tendency of overturning is created in isolators leading to their destruction. The main objective of this study is to significantly reduce the lateral displacement of base isolation subjected to near field earthquakes. In this research, seismic response calculation has been carried out for five steel moment frame structure with the 3, 5, 8, 11, and 14 stories in two states of with and without stiff core structure and energy dissipaters. The analyses has been done under fourteen scaled records of seven near-source and seven far-source earthquakes. It has been shown that the lateral displacement of base isolation system can be reduced by 87% for low-rise buildings, and 77% for high-rise buildings.

Numerical analysis of safety distances of reinforced concrete structures subjected to blast loading by Perform-3D

Purpose The purpose of this study is to develop the performance model of buildings designed by the seismic code 2800 against the explosion wave and determination of safety distance. Design/methodology/approach Analytical models of three-, five- and ten story structures that used moment frame system and also a ten-storey building with shaer wall designed based on the seismic code 2800 in term of design and nonlinear analysis were generated for use with Perform-3D software. Extensive parametric analysis is executed on different explosive loads with 100, 500, 1,000 and 5,000 Trinitrotoluene, soil types 2 and 3, models eqs and eqbs, the number of story buildings and the effect of shear wall to determine the safety distance based on collapse threshold performance (CP) level criterion. Findings The results indicate that by increasing the explosives mass from 100 to 5,000 kg and the number of the stories three and five induce increasing the safety distance of CP level in buildings to 4.5 meter and 3 meter times, respectively. Ten-story structures modeled on shear wall show very good performance because of stiffness rising and high energy absorption. In addition, by increasing the stories from five to ten, the amount of the safety distance reduces the CP level to 3.9 meter times. Originality/value The results of this work are meaningful for explosion-resistant design and damage assessments of reinforced concrete moment framed structures subjected to explosive explosion.

Seismic Performance Assessment of a Moment-Frame Reinforced Concrete Building Typology

This study covers the application of Static and Dynamic nonlinear analysis to an old moment-frame reinforced concrete building. The case study selected is a template one designed in 1982 without shear walls and built throughout Albanian region in the communism era using old standards (KTP 2-78). For the capacity calculation, Pushover analysis is performed using an inverse triangular load pattern. The demand calculation is conducted using Incremental Dynamic Analysis (IDA) as a method which provides the response behavior of the structure from the elastic range until collapse. For the dynamic analysis is used a set of 18 earthquakes with no marks of directivity. Limit states are defined for both Pushover and IDA based on the FEMA 356 guidelines. The mathematical model is prepared in the environment of Zeus-NL, a software developed especially for earthquake applications. The parameters defined for the IDA analysis are 5% damped first mode spectral acceleration (Sa(T1,5%)) for the intensity measure (IM) and maximum global drift ratio (ϴmax) for the damage measure (DM). In addition, limit states are selected for the pushover curve as Immediate Occupancy (IO), Life Safety (LS) and Collapse Prevention (CP). Similarly, for the IDA curve the limit states are selected as IO, CP and Global Instability (GI) based on FEMA guidelines. Furthermore, IDA curves are summarized into 16%, 50% and 84% fractiles as suggested in the literature. Additionally, a comparison between Pushover and IDA median (50% fractile) is shown from the same graph to illustrate the correlations between performance levels. Finally, structural performance is interpreted based on the outcomes.

Effect of bidirectional excitation on seismic performance of regular RC frame buildings designed for modern codes

The existing practice to estimate seismic performance of a regular building is to carry out nonlinear time history analysis using two-dimensional models subjected to unidirectional excitations, even though the multiple components of ground motion can affect the seismic response, significantly. During seismic shaking, columns are invariably subjected to bending in two orthogonal vertical planes, which leads to a complex interaction of axial force with the biaxial bending moments. This article compares the seismic performance of regular and symmetric RC moment frame buildings for unidirectional and bidirectional ground motions. The buildings are designed and detailed according to the Indian codes, which are at par with the other modern seismic codes. A fiber-hinge model, duly calibrated with the biaxial experimental results, is utilized to simulate the inelastic behavior of columns under bidirectional bending. A comparison of the estimated seismic collapse capacity is presented, illustrating the importance of considering the bidirectional effects. The results from fragility analysis indicate that the failure probabilities of buildings under the bidirectional excitation are significantly higher as compared to those obtained under the unidirectional excitation.