Interface-targeted seismic velocity estimation using machine learning
SUMMARY We present a new approach to estimate 3-D seismic velocities along a target interface. This approach uses an artificial neural network trained with user-supplied geological and geophysical input features derived from both a 3-D seismic reflection volume and a 2-D wide-angle seismic profile that were acquired from the Galicia margin, offshore Spain. The S-reflector detachment fault was selected as the interface of interest. The neural network in the form of a multilayer perceptron was employed with an autoencoder and a regression layer. The autoencoder was trained using a set of input features from the 3-D reflection volume. This set of features included the reflection amplitude and instantaneous frequency at the interface of interest, time-thicknesses of overlying major layers and ratios of major layer time-thicknesses to the total time-depth of the interface. The regression model was trained to estimate the seismic velocities of the crystalline basement and mantle from these features. The ‘true’ velocities were obtained from an independent full-waveform inversion along a 2-D wide-angle seismic profile, contained within the 3-D data set. The autoencoder compressed the vector of inputs into a lower dimensional space, then the regression layer was trained in the lower dimensional space to estimate velocities above and below the targeted interface. This model was trained on 50 networks with different initializations. A total of 37 networks reached minimum achievable error of 2 per cent. The low standard deviation (<300 m s−1) between different networks and low errors on velocity estimations demonstrate that the input features were sufficient to capture variations in the velocity above and below the targeted S-reflector. This regression model was then applied to the 3-D reflection volume where velocities were predicted over an area of ∼400 km2. This approach provides an alternative way to obtain velocities across a 3-D seismic survey from a deep non-reflective lithology (e.g. upper mantle) , where conventional reflection velocity estimations can be unreliable.