scholarly journals Investigation of seabed fishing impacts on benthic structure using multi-beam sonar, sidescan sonar, and video

2007 ◽  
Vol 64 (5) ◽  
pp. 1053-1065 ◽  
Author(s):  
Mashkoor A. Malik ◽  
Larry A. Mayer
Keyword(s):  
Gulf Of Maine ◽  
Fishing Ground ◽  
Sidescan Sonar ◽  
Data Sets ◽  
Frequency Filtering ◽  
Data Set ◽  
Detection And Identification ◽  
Spatial Frequency Filtering ◽  
Disparate Data ◽  
Fishing Impacts

Abstract Malik, M. A., and Mayer, L. A. 2007. Investigation of seabed fishing impacts on benthic structure using multi-beam sonar, sidescan sonar, and video. – ICES Journal of Marine Science, 64: 1053–1065. Long, linear furrows of lengths up to several kilometres were observed during a recent high-resolution, multi-beam bathymetry survey of Jeffreys Ledge, a prominent fishing ground in the Gulf of Maine located about 50 km from Portsmouth, NH, USA. These features, which have a relief of only a few centimetres, are presumed to be caused either directly by dredging gear used in the area for scallop and clam fisheries, or indirectly through the dragging of boulders by bottom gear. Extraction of these features with very small vertical expression from a noisy data set, including several instrumental artefacts, presented a number of challenges. To enhance the detection and identification of the features, data artefacts were identified and removed selectively using spatial frequency filtering. Verification of the presence of the features was carried out with repeated multi-beam bathymetry surveys and sidescan sonar surveys. Seabed marks that were clearly detected on multi-beam and sidescan sonar records were not discernible on a subsequent video survey. The inability to see the seabed marks with video may be related to their age. The fact that with time, the textural contrasts discernible by video imagery are lost has important ramifications for the appropriateness of methodologies for quantifying gear impact. The results imply that detailed investigations of seabed impact are best done with a suite of survey tools (multi-beam bathymetry, sidescan sonar, and video) and software to integrate the disparate data sets geographically.

scholarly journals An Evolutionary Schema for Using “it-is-what-it-is” Data in Official Statistics

2019 ◽  
Vol 35 (1) ◽  
pp. 137-165
Author(s):  
Jack Lothian ◽  
Anders Holmberg ◽  
Allyson Seyb
Keyword(s):  
Data Sources ◽  
Data Sets ◽  
Data Set ◽  
Policy Makers ◽  
Survey Error ◽  
Time Space ◽  
Central Statistical ◽  
Disparate Data ◽  
Survey Methodologies ◽  
Biased Estimates

Abstract The linking of disparate data sets across time, space and sources is probably the foremost current issue facing Central Statistical Agencies (CSA). If one reviews the current literature looking for the prevalent challenges facing CSAs, three issues stand out: 1) using administrative data effectively; 2) big data and what it means for CSAs; and 3) integrating disparate data set (such as health, education and wealth) to provide measurable facts that can guide policy makers. CSAs are being challenged to explore the same kind of challenges faced by Google, Facebook, and Yahoo, which are using graphical/semantic web models for organizing, searching and analysing data. Additionally, time and space (geography) are becoming more important dimensions (domains) for CSAs as they start to explore new data sources and ways to integrate those to study relationships. Central agency methodologists are being pushed to include these new perspectives into their standard theories, practises and policies. Like most methodologists, the authors see surveys and the publications of their results as a process where estimation is the key tool to achieve the final goal of an accurate statistical output. Randomness and sampling exists to support this goal, and early on it was clear to us that the incoming “it-is-what-it-is” data sources were not randomly selected. These sources were obviously biased and thus would produce biased estimates. So, we set out to design a strategy to deal with this issue. This article presents a schema for integrating and linking traditional and non-traditional datasets. Like all survey methodologies, this schema addresses the fundamental issues of representativeness, estimation and total survey error measurement.

Co-Occurrence Mapping of Disparate Data Sets to Assess Potential Aquaculture Sites in the Gulf of Maine

2017 ◽  
Vol 26 (1) ◽  
pp. 70-85 ◽  
Author(s):  
Michael F. Tlusty ◽  
Brooke Wikgren ◽  
Kerry Lagueux ◽  
Hauke Kite-Powell ◽  
Di Jin ◽  
...  
Keyword(s):  
Gulf Of Maine ◽  
Data Sets ◽  
Disparate Data

The social wasp Vespula germanica (Fabricius) (Hymenoptera: Vespidae) population dynamics in England over 39 years.

2018 ◽  
Vol 154 (2) ◽  
pp. 149-155
Author(s):  
Michael Archer
Keyword(s):  
Population Dynamics ◽  
Population Dynamic ◽  
Ecological Factors ◽  
Social Wasp ◽  
Data Sets ◽  
Data Set ◽  
Vespula Germanica ◽  
The Social ◽  
Minimum Number ◽  
Suction Traps

1. Yearly records of worker Vespula germanica (Fabricius) taken in suction traps at Silwood Park (28 years) and at Rothamsted Research (39 years) are examined. 2. Using the autocorrelation function (ACF), a significant negative 1-year lag followed by a lesser non-significant positive 2-year lag was found in all, or parts of, each data set, indicating an underlying population dynamic of a 2-year cycle with a damped waveform. 3. The minimum number of years before the 2-year cycle with damped waveform was shown varied between 17 and 26, or was not found in some data sets. 4. Ecological factors delaying or preventing the occurrence of the 2-year cycle are considered.

Predictive and Descriptive CoMFA Models: The Effect of Variable Selection

2018 ◽  
Vol 21 (2) ◽  
pp. 117-124 ◽  
Author(s):  
Bakhtyar Sepehri ◽  
Nematollah Omidikia ◽  
Mohsen Kompany-Zareh ◽  
Raouf Ghavami
Keyword(s):  
Variable Selection ◽  
Predictive Power ◽  
Selection Method ◽  
Data Sets ◽  
Data Set ◽  
Comfa Model ◽  
Variable Selection Method

Aims & Scope: In this research, 8 variable selection approaches were used to investigate the effect of variable selection on the predictive power and stability of CoMFA models. Materials & Methods: Three data sets including 36 EPAC antagonists, 79 CD38 inhibitors and 57 ATAD2 bromodomain inhibitors were modelled by CoMFA. First of all, for all three data sets, CoMFA models with all CoMFA descriptors were created then by applying each variable selection method a new CoMFA model was developed so for each data set, 9 CoMFA models were built. Obtained results show noisy and uninformative variables affect CoMFA results. Based on created models, applying 5 variable selection approaches including FFD, SRD-FFD, IVE-PLS, SRD-UVEPLS and SPA-jackknife increases the predictive power and stability of CoMFA models significantly. Result & Conclusion: Among them, SPA-jackknife removes most of the variables while FFD retains most of them. FFD and IVE-PLS are time consuming process while SRD-FFD and SRD-UVE-PLS run need to few seconds. Also applying FFD, SRD-FFD, IVE-PLS, SRD-UVE-PLS protect CoMFA countor maps information for both fields.

Human Activity Recognition using Fourier Transform Inspired Deep Learning Combination Model

2019 ◽  
Vol 9 (1) ◽  
pp. 16-31
Author(s):  
Kyungkoo Jun
Keyword(s):  
Fourier Transform ◽  
Deep Learning ◽  
Short Term Memory ◽  
Window Size ◽  
Sensor Data ◽  
Data Sets ◽  
Data Set ◽  
Proposed Model ◽  
Testing Data ◽  
Labeling Scheme

Background & Objective: This paper proposes a Fourier transform inspired method to classify human activities from time series sensor data. Methods: Our method begins by decomposing 1D input signal into 2D patterns, which is motivated by the Fourier conversion. The decomposition is helped by Long Short-Term Memory (LSTM) which captures the temporal dependency from the signal and then produces encoded sequences. The sequences, once arranged into the 2D array, can represent the fingerprints of the signals. The benefit of such transformation is that we can exploit the recent advances of the deep learning models for the image classification such as Convolutional Neural Network (CNN). Results: The proposed model, as a result, is the combination of LSTM and CNN. We evaluate the model over two data sets. For the first data set, which is more standardized than the other, our model outperforms previous works or at least equal. In the case of the second data set, we devise the schemes to generate training and testing data by changing the parameters of the window size, the sliding size, and the labeling scheme. Conclusion: The evaluation results show that the accuracy is over 95% for some cases. We also analyze the effect of the parameters on the performance.

scholarly journals An Algorithm for the Removal of Cosmic Ray Artifacts in Spectral Data Sets

2019 ◽  
Vol 73 (8) ◽  
pp. 893-901
Author(s):  
Sinead J. Barton ◽  
Bryan M. Hennelly
Keyword(s):  
Cosmic Ray ◽  
Data Sets ◽  
Biological Cells ◽  
Statistical Classification ◽  
Signal To Noise ◽  
Multivariate Statistical ◽  
Data Set ◽  
Artefact Removal ◽  
Single Capture ◽  
Acquisition Method

Cosmic ray artifacts may be present in all photo-electric readout systems. In spectroscopy, they present as random unidirectional sharp spikes that distort spectra and may have an affect on post-processing, possibly affecting the results of multivariate statistical classification. A number of methods have previously been proposed to remove cosmic ray artifacts from spectra but the goal of removing the artifacts while making no other change to the underlying spectrum is challenging. One of the most successful and commonly applied methods for the removal of comic ray artifacts involves the capture of two sequential spectra that are compared in order to identify spikes. The disadvantage of this approach is that at least two recordings are necessary, which may be problematic for dynamically changing spectra, and which can reduce the signal-to-noise (S/N) ratio when compared with a single recording of equivalent duration due to the inclusion of two instances of read noise. In this paper, a cosmic ray artefact removal algorithm is proposed that works in a similar way to the double acquisition method but requires only a single capture, so long as a data set of similar spectra is available. The method employs normalized covariance in order to identify a similar spectrum in the data set, from which a direct comparison reveals the presence of cosmic ray artifacts, which are then replaced with the corresponding values from the matching spectrum. The advantage of the proposed method over the double acquisition method is investigated in the context of the S/N ratio and is applied to various data sets of Raman spectra recorded from biological cells.

Imbalanced Data Detection Kernel Method in Closed Systems

2013 ◽  
Vol 756-759 ◽  
pp. 3652-3658
Author(s):  
You Li Lu ◽  
Jun Luo
Keyword(s):  
Kernel Methods ◽  
Kernel Method ◽  
Imbalanced Data ◽  
Data Detection ◽  
Data Sets ◽  
System Call ◽  
Data Set ◽  
Imbalanced Data Sets ◽  
Lower Complexity ◽  
Closed Systems

Under the study of Kernel Methods, this paper put forward two improved algorithm which called R-SVM & I-SVDD in order to cope with the imbalanced data sets in closed systems. R-SVM used K-means algorithm clustering space samples while I-SVDD improved the performance of original SVDD by imbalanced sample training. Experiment of two sets of system call data set shows that these two algorithms are more effectively and R-SVM has a lower complexity.

scholarly journals Investigating the impact of pre-processing techniques and pre-trained word embeddings in detecting Arabic health information on social media

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Yahya Albalawi ◽  
Jim Buckley ◽  
Nikola S. Nikolov
Keyword(s):  
Social Media ◽  
Deep Learning ◽  
Comprehensive Evaluation ◽  
Classification Problem ◽  
Data Sets ◽  
Word Embeddings ◽  
Data Set ◽  
Lower Accuracy ◽  
Health Related ◽  
The Impact

AbstractThis paper presents a comprehensive evaluation of data pre-processing and word embedding techniques in the context of Arabic document classification in the domain of health-related communication on social media. We evaluate 26 text pre-processings applied to Arabic tweets within the process of training a classifier to identify health-related tweets. For this task we use the (traditional) machine learning classifiers KNN, SVM, Multinomial NB and Logistic Regression. Furthermore, we report experimental results with the deep learning architectures BLSTM and CNN for the same text classification problem. Since word embeddings are more typically used as the input layer in deep networks, in the deep learning experiments we evaluate several state-of-the-art pre-trained word embeddings with the same text pre-processing applied. To achieve these goals, we use two data sets: one for both training and testing, and another for testing the generality of our models only. Our results point to the conclusion that only four out of the 26 pre-processings improve the classification accuracy significantly. For the first data set of Arabic tweets, we found that Mazajak CBOW pre-trained word embeddings as the input to a BLSTM deep network led to the most accurate classifier with F1 score of 89.7%. For the second data set, Mazajak Skip-Gram pre-trained word embeddings as the input to BLSTM led to the most accurate model with F1 score of 75.2% and accuracy of 90.7% compared to F1 score of 90.8% achieved by Mazajak CBOW for the same architecture but with lower accuracy of 70.89%. Our results also show that the performance of the best of the traditional classifier we trained is comparable to the deep learning methods on the first dataset, but significantly worse on the second dataset.

PSVI-8 Meta-regression Analysis to Determine the Relationship Between Growing Pig Body Weight and Variation

2021 ◽  
Vol 99 (Supplement_1) ◽  
pp. 218-219
Author(s):  
Andres Fernando T Russi ◽  
Mike D Tokach ◽  
Jason C Woodworth ◽  
Joel M DeRouchey ◽  
Robert D Goodband ◽  
...  
Keyword(s):  
Body Weight ◽  
Regression Analysis ◽  
Sample Size ◽  
Polynomial Regression ◽  
Data Sets ◽  
Regression Equations ◽  
Prediction Equations ◽  
Data Set ◽  
Rate Of Increase ◽  
The Relationship

Abstract The swine industry has been constantly evolving to select animals with improved performance traits and to minimize variation in body weight (BW) in order to meet packer specifications. Therefore, understanding variation presents an opportunity for producers to find strategies that could help reduce, manage, or deal with variation of pigs in a barn. A systematic review and meta-analysis was conducted by collecting data from multiple studies and available data sets in order to develop prediction equations for coefficient of variation (CV) and standard deviation (SD) as a function of BW. Information regarding BW variation from 16 papers was recorded to provide approximately 204 data points. Together, these data included 117,268 individually weighed pigs with a sample size that ranged from 104 to 4,108 pigs. A random-effects model with study used as a random effect was developed. Observations were weighted using sample size as an estimate for precision on the analysis, where larger data sets accounted for increased accuracy in the model. Regression equations were developed using the nlme package of R to determine the relationship between BW and its variation. Polynomial regression analysis was conducted separately for each variation measurement. When CV was reported in the data set, SD was calculated and vice versa. The resulting prediction equations were: CV (%) = 20.04 – 0.135 × (BW) + 0.00043 × (BW)2, R2=0.79; SD = 0.41 + 0.150 × (BW) - 0.00041 × (BW)2, R2 = 0.95. These equations suggest that there is evidence for a decreasing quadratic relationship between mean CV of a population and BW of pigs whereby the rate of decrease is smaller as mean pig BW increases from birth to market. Conversely, the rate of increase of SD of a population of pigs is smaller as mean pig BW increases from birth to market.

Sign in / Sign up

Export Citation Format

Share Document