Evaluation of Two Field Screening Test Kits for the Detection of PCBs in Soil by Immunoassay

1994 ◽  
Vol 77 (6) ◽  
pp. 1664-1671 ◽  
Author(s):  
Larry C Waters ◽  
Rob R Smith ◽  
Joe H Stewart ◽  
Roger A Jenkins ◽  
Richard W Counts

Abstract Effective field screening methods could minimize the time and reduce the cost of characterizing and remediating hazardous waste sites. Rigorous evaluation of novel field screening methods is required before they can be considered as replacements for, or adjuncts to, currently used laboratory methods. Alternatives to standard laboratory analytical methods should be rapid, analyte-specific, cost-effective, accurate, and sensitive in the range at which the analyte is regulated. In this study, 2 immunoassay- based field test kits for polychlorinated biphenyls (PCBs) in soil were evaluated with reference to those criteria. PCBs were analyzed in both spiked and field soil samples. Based on laboratory performance, we estimate that 20 to 40 samples can be analyzed in the field per day. Sensitivity of the assay is in the 1 ppm range. Because the assay is based on the specificity of the antigen/antibody reaction, interferences are practically negligible. The method is accurate; the false-negative and false-positive results that were observed can be explained by differences in the immunoreactivities of the Aroclors present in the test samples and the Aroclors used as standards in the assay. The savings in time and expense to analyze PCBs in soil with the immunoassay-based test kits over conventional laboratory methods should be substantial.

Dose-Response ◽  
2020 ◽  
Vol 18 (3) ◽  
pp. 155932582095136
Author(s):  
Olivier Capitain ◽  
Valérie Seegers ◽  
Jean-Philippe Metges ◽  
Roger Faroux ◽  
Claire Stampfli ◽  
...  

Background: Fluoropyrimidines (FPs) carry around 20% risk of G3-5 toxicity and 0.2-1% risk of death, due to dihydropyrimidine dehydrogenase (DPD) deficiency. Several screening approaches exist for predicting toxicity, however there is ongoing debate over which method is best. This study compares 4 screening approaches. Method: 472 patients treated for colorectal, head-and-neck, breast, or pancreatic cancers, who had not been tested pre-treatment for FP toxicity risk, were screened using: DPYD genotyping (G); phenotyping via plasma Uracil (U); phenotyping via plasma-dihydrouracil/uracil ratio (UH2/U); and a Multi-Parametric Method (MPM) using genotype, phenotype, and epigenetic data. Performance was compared, particularly the inability to detect at-risk patients (false negatives). Results: False negative rates for detecting G5 toxicity risk were 51.2%, 19.5%, 9.8% and 2.4%, for G, U, UH2/U and MPM, respectively. False negative rates for detecting G4-5 toxicity risk were 59.8%, 36.1%, 21.3% and 4.7%, respectively. MPM demonstrated significantly (p < 0.001) better prediction performance. Conclusion: MPM is the most effective method for limiting G4-5 toxicity. Its systematic implementation is cost-effective and significantly improves the risk-benefit ratio of FP-treatment. The use of MPM, rather than G or U testing, would avoid nearly 8,000 FP-related deaths per year globally (500 in France), and spare hundreds of thousands from G4 toxicity.


2018 ◽  
Vol 4 (Supplement 3) ◽  
pp. 2s-2s ◽  
Author(s):  
Gaurav Agarwal ◽  
S. Chaitra ◽  
M. Sabaretnam ◽  
Anjali Mishra ◽  
Vinita Agrawal ◽  
...  

Purpose Acceptance of breast conservation surgery (BCS) is low among Indian women, as many perceive mastectomy to be a superior cost-effective surgical option. Obtaining uninfiltrated margins is vital during BCS. The need for reoperation to re-excise infiltrated surgical margins adds to the cost of treatment, which further reduces the acceptability of BCS. Intraoperative frozen-section (FS) histology assessment of margins provides an opportunity to carry out a single-stage, safe BCS; however, the utility of FS margin assessment remains unproven because of its perceived low accuracy, added costs, and longer operating time. In this retrospective analysis, we studied the accuracy of FS for margin assessment, its ability to help avoid reoperations, and the cost effectiveness of one-step BCS using FS compared with margin assessment using postoperative paraffin section (PS) histopathology. Methods Patients who underwent BCS during 2011 to 2015 with a minimum 1-year follow-up were included. All patients underwent intraoperative FS and postoperative PS margin assessment. All infiltrated margins were re-excised. Repeatedly infiltrated re-excised margins or extensive ductal carcinoma in situ necessitated mastectomy in few patients. We evaluated the accuracy of FS in the detection of margin infiltration, thereby allowing single-stage, safe BCS. The cost effectiveness of two strategies for the management of infiltrated margins, namely intraoperative FS and single-stage margin excision/mastectomy and postoperative PS and reoperation (two-step) surgery, were compared. The cost per saved reoperation with the use of intraoperative FS was calculated using actual hospital costs and various—lower and higher—cost assumptions. Results On the basis of intraoperative FS margin assessment, 18 (12.5%) of 144 patients required margin(s) re-excision and another nine patients (6.2%) needed mastectomy. Twenty-six patients (18%) were thus spared reoperation with the use of FS. Two patients (1.4%) with uninfiltrated margins on FS—false-negative FS—needed reoperation for infiltrated margins that were detected on PS. Considering the costs (144 FS and two reoperations) and savings (26 avoided reoperations), use of FS was 1.15 times more cost effective than PS for achieving uninfiltrated margins. Cost incurred per saved reoperation by FS was INR 5,438 (approximately $81 USD). Sensitivity analysis using various cost assumptions revealed similar results. Conclusion Use of FS can facilitate single-step, oncologically safe BCS by avoiding reoperation in those patients with infiltrated margins and is cost effective compared with postoperative margin assessment using PS alone. FS can thus help in improving the acceptability of BCS, even in those patients with relatively large tumors for whom the possible need and cost of reoperation are major deterrents against BCS. AUTHORS' DISCLOSURES OF POTENTIAL CONFLICTS OF INTEREST The following represents disclosure information provided by authors of this manuscript. All relationships are considered compensated. Relationships are self-held unless noted. I = Immediate Family Member, Inst = My Institution. Relationships may not relate to the subject matter of this manuscript. For more information about ASCO's conflict of interest policy, please refer to www.asco.org/rwc or ascopubs.org/jco/site/ifc . No COIs from the authors.


2021 ◽  
Vol 22 (2) ◽  
Author(s):  
Shima Bordbar ◽  
Hassan Joulaei ◽  
Abdosaleh Jafari ◽  
Mehrdad Askarian ◽  
Charles John Palenik ◽  
...  

Background: Acquired immunodeficiency syndrome is a behavioral disorder that can be detected via two methods, including active and passive screening. Objectives: This study aimed to evaluate the cost-effectiveness of screening strategies of HIV/AIDS among injection drug users (IDUs) referring to the voluntary counseling and testing (VCT) center and drop-in center (DIC) of Shiraz University of Medical Sciences. Methods: This was a cross-sectional cost-effectiveness analysis to compare the cost-effectiveness of the two active and passive screening methods in 2015. The decision tree model, along with the TreeAge11 software, was used to analyze the data. Results: The averages of cost and effectiveness were $989 and 987 subjects in the active screening method while they were $1,767 and 209 subjects in the passive screening method, respectively. The incremental cost-effectiveness ratio (ICER) to early-diagnosed and averted cases was $855/39 for the active screening method and $1528/90 for the passive screening method. According to the findings of the study, the active screening method is more cost-effective than its passive counterpart. Conclusions: According to the findings of the study, the active screening method is more cost-effective than its passive counterpart, and it is recommended to be used in these cases.


2018 ◽  
Vol 31 (3) ◽  
Author(s):  
Elina Eleftheria Pliakos ◽  
Nikolaos Andreatos ◽  
Fadi Shehadeh ◽  
Panayiotis D. Ziakas ◽  
Eleftherios Mylonakis

SUMMARYBloodstream infections are associated with considerable morbidity and health care costs. Molecular rapid diagnostic tests (mRDTs) are a promising complement to conventional laboratory methods for the diagnosis of bloodstream infections and may reduce the time to effective therapy among patients with bloodstream infections. The concurrent implementation of antimicrobial stewardship programs (ASPs) may reinforce these benefits. The aim of this study was to evaluate the cost-effectivenesses of competing strategies for the diagnosis of bloodstream infection alone or combined with an ASP. To this effect, we constructed a decision-analytic model comparing 12 strategies for the diagnosis of bloodstream infection. The main arms compared the use of mRDT and conventional laboratory methods with or without an ASP. The baseline strategy used as the standard was the use of conventional laboratory methods without an ASP, and our decision-analytic model assessed the cost-effectivenesses of 5 principal strategies: mRDT (with and without an ASP), mRDT with an ASP, mRDT without an ASP, conventional laboratory methods with an ASP, and conventional laboratory methods without an ASP. Furthermore, based on the availability of data in the literature, we assessed the cost-effectivenesses of 7 mRDT subcategories, as follows: PCR with an ASP, matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) analysis with an ASP, peptide nucleic acid fluorescentin situhybridization (PNA-FISH) with an ASP, a blood culture nanotechnology microarray system for Gram-negative bacteria (BC-GP) with an ASP, a blood culture nanotechnology microarray system for Gram-positive bacteria (BC-GN) with an ASP, PCR without an ASP, and PNA-FISH without an ASP. Our patient population consisted of adult inpatients in U.S. hospitals with suspected bloodstream infection. The time horizon of the model was the projected life expectancy of the patients. In a base-case analysis, cost-effectiveness was determined by calculating the numbers of bloodstream infection deaths averted, the numbers of quality-adjusted life years gained, and incremental cost-effectiveness ratios (ICERs). In a probabilistic analysis, uncertainty was addressed by plotting cost-effectiveness planes and acceptability curves for various willingness-to-pay thresholds. In the base-case analysis, MALDI-TOF analysis with an ASP was the most cost-effective strategy, resulting in savings of $29,205 per quality-adjusted life year and preventing 1 death per 14 patients with suspected bloodstream infection tested compared to conventional laboratory methods without an ASP (ICER, −$29,205/quality-adjusted life year). BC-GN with an ASP (ICER, −$23,587/quality-adjusted life year), PCR with an ASP (ICER, −$19,833/quality-adjusted life year), and PCR without an ASP (ICER, −$21,039/quality-adjusted life year) were other cost-effective options. In the probabilistic analysis, mRDT was dominant and cost-effective in 85.1% of simulations. Importantly, mRDT with an ASP had an 80.0% chance of being cost-effective, while mRDT without an ASP had only a 41.1% chance. In conclusion, our findings suggest that mRDTs are cost-effective for the diagnosis of patients with suspected bloodstream infection and can reduce health care expenditures. Notably, the combination of mRDT and an ASP can result in substantial health care savings.


Author(s):  
James F. Mancuso

IBM PC compatible computers are widely used in microscopy for applications ranging from control to image acquisition and analysis. The choice of IBM-PC based systems over competing computer platforms can be based on technical merit alone or on a number of factors relating to economics, availability of peripherals, management dictum, or simple personal preference.IBM-PC got a strong “head start” by first dominating clerical, document processing and financial applications. The use of these computers spilled into the laboratory where the DOS based IBM-PC replaced mini-computers. Compared to minicomputer, the PC provided a more for cost-effective platform for applications in numerical analysis, engineering and design, instrument control, image acquisition and image processing. In addition, the sitewide use of a common PC platform could reduce the cost of training and support services relative to cases where many different computer platforms were used. This could be especially true for the microscopists who must use computers in both the laboratory and the office.


Phlebologie ◽  
2007 ◽  
Vol 36 (06) ◽  
pp. 309-312 ◽  
Author(s):  
T. Schulz ◽  
M. Jünger ◽  
M. Hahn

Summary Objective: The goal of the study was to assess the effectiveness and patient tolerability of single-session, sonographically guided, transcatheter foam sclerotherapy and to evaluate its economic impact. Patients, methods: We treated 20 patients with a total of 22 varicoses of the great saphenous vein (GSV) in Hach stage III-IV, clinical stage C2-C5 and a mean GSV diameter of 9 mm (range: 7 to 13 mm). We used 10 ml 3% Aethoxysklerol®. Additional varicoses of the auxiliary veins of the GSV were sclerosed immediately afterwards. Results: The occlusion rate in the treated GSVs was 100% one week after therapy as demonstrated with duplex sonography. The cost of the procedure was 207.91 E including follow-up visit, with an average loss of working time of 0.6 days. After one year one patient showed clinical signs of recurrent varicosis in the GSV; duplex sonography showed reflux in the region of the saphenofemoral junction in a total of seven patients (32% of the treated GSVs). Conclusion: Transcatheter foam sclerotherapy of the GSV is a cost-effective, safe method of treating varicoses of GSV and broadens the spectrum of therapeutic options. Relapses can be re-treated inexpensively with sclerotherapy.


2019 ◽  
Vol 2 (4) ◽  
pp. 260-266
Author(s):  
Haru Purnomo Ipung ◽  
Amin Soetomo

This research proposed a model to assist the design of the associated data architecture and data analytic to support talent forecast in the current accelerating changes in economy, industry and business change due to the accelerating pace of technological change. The emerging and re-emerging economy model were available, such as Industrial revolution 4.0, platform economy, sharing economy and token economy. Those were driven by new business model and technology innovation. An increase capability of technology to automate more jobs will cause a shift in talent pool and workforce. New business model emerge as the availabilityand the cost effective emerging technology, and as a result of emerging or re-emerging economic models. Both, new business model and technology innovation, create new jobs and works that have not been existed decades ago. The future workers will be faced by jobs that may not exist today. A dynamics model of inter-correlation of economy, industry, business model and talent forecast were proposed. A collection of literature review were conducted to initially validate the model.


The choice of cost-effective method of anticorrosive protection of steel structures is an urgent and time consuming task, considering the significant number of protection ways, differing from each other in the complex of technological, physical, chemical and economic characteristics. To reduce the complexity of solving this problem, the author proposes a computational tool that can be considered as a subsystem of computer-aided design and used at the stage of variant and detailed design of steel structures. As a criterion of the effectiveness of the anti-corrosion protection method, the cost of the protective coating during the service life is accepted. The analysis of existing methods of steel protection against corrosion is performed, the possibility of their use for the protection of the most common steel structures is established, as well as the estimated period of effective operation of the coating. The developed computational tool makes it possible to choose the best method of protection of steel structures against corrosion, taking into account the operating conditions of the protected structure and the possibility of using a protective coating.


Author(s):  
W. C. Solomon ◽  
M. T. Lilly ◽  
J. I. Sodiki

The development and evaluation of brake pads using groundnut shell (GS) particles as substitute material for asbestos were carried out in this study. This was with a view to harnessing the properties of GS, which is largely deposited as waste, and in replacing asbestos which is carcinogenic in nature despite its good tribological and mechanical properties. Two sets of composite material were developed using varying particle sizes of GS as filler material, with phenolic resin as binder with percentage compositions of 45% and 50% respectively. Results obtained indicate that the compressive strength and density increase as the sieve size of the filler material decreases, while water and oil absorption rates increase with an increase in sieve size of GS particle. This study also indicates that the cost of producing brake pad can be reduced by 19.14 percent if GS is use as filler material in producing brake pad. The results when compared with those of asbestos and industrial waste showed that GS particle can be used as an effective replacement for asbestos in producing automobile brake pad. Unlike asbestos, GS-based brake pads are environmental friendly, biodegradable and cost effective.


2004 ◽  
Vol 12 (2) ◽  
pp. 115-125
Author(s):  
Katrin Batereau ◽  
Martin Müller ◽  
Norbert Klaas ◽  
Baldur Barczewski

Sign in / Sign up

Export Citation Format

Share Document