Polymer characterization

Polymer science is, of course, driven by the desire to produce new materials for new applications. The success of materials such as polyethylene, polypropylene, and polystyrene is such that these materials are manufactured on a huge scale and are indeed ubiquitous. There is still a massive drive to understand these materials and improve their properties in order to meet material requirements; however, increasingly polymers are being applied to a wide range of problems, and certainly in terms of developing new materials there is much more emphasis on control. Such control can be control of molecular weight, for example, the production of polymers with a highly narrow molecular weight distribution by anionic polymerization. The control of polymer architecture extends from block copolymers to other novel architectures such as ladder polymers and dendrimers. Cyclic systems can also be prepared, usually these are lower molecular weight systems, although these also might be expected to be the natural consequence of step-growth polymerization at high conversion. Polymers are used in a wide range of applications, as coatings, as adhesives, as engineering and structural materials, for packaging, and for clothing to name a few. A key feature of the success and versatility of these materials is that it is possible to build in properties by careful design of the (largely) organic molecules from which the chains are built up. For example, rigid aromatic molecules can be used to make high-strength fibres, the most highprofile example of this being Kevlar®; rigid molecules of this type are often made by simple step-growth polymerization and offer particular synthetic challenges as outlined in Chapter 4. There is now an increasing demand for highly specialized materials for use in for example optical and electronic applications and polymers have been singled out as having particular potential in this regard. For example, there is considerable interest in the development of polymers with targeted optical properties such as second-order optical nonlinearity, and in conducting polymers as electrode materials, as a route towards supercapacitors and as electroluminescent materials. Polymeric materials can also be used as an electrolyte in the design of compact batteries.