Spatial filtering

Optics f2f ◽  
2018 ◽  
pp. 159-176
Author(s):  
Charles S. Adams ◽  
Ifan G. Hughes

This chapter exploits the Fourier relationship between the fields at different positions for modifying images. Firstly, apodization is considered, where a filter is added in the plane of the lens to modify the spatial distribution in the focal plane. Secondly, spatial filtering is analysed, where a two-lens system is used to allow the manipulation of an image by modifying its Fourier transform.

Optik ◽  
2006 ◽  
Vol 117 (3) ◽  
pp. 107-110 ◽  
Author(s):  
Linfei Chen ◽  
Daomu Zhao

2012 ◽  
Vol 571 ◽  
pp. 324-327
Author(s):  
A Qi Yan ◽  
Deng Shan Wu ◽  
Hao Wang ◽  
Jian Zhong Cao ◽  
Jing Jin Ma ◽  
...  

Infrared zoom lens system with cooled focal plane array (FPA) detector is widely used in military application. Relevant information about optical design can be got easily, but research on infrared zoom lens system with low cost and high image quality for commercial application is less. This paper design a Compact infrared zoom lens system with only four lenses, using an uncooled focal plane array (FPA) with 384×288 pixels with zoom ratio 3:1. Because of large F number and less lenses, transmission of the whole zoom system is greatly improved. NETD and MRTD of infrared system will be satisfying by this compact design. There is no special surface such as diffractive surface, HOE in zoom lens system, and only Ge and Znse infrared materials are chosen which result in lower production cost of infrared zoom lens system for commercial applications.


2015 ◽  
Vol 12 (5) ◽  
pp. 563 ◽  
Author(s):  
Martin Günter Joachim Löder ◽  
Mirco Kuczera ◽  
Svenja Mintenig ◽  
Claudia Lorenz ◽  
Gunnar Gerdts

Environmental context Microplastics are of increasing environmental concern following reports that they occur worldwide from the arctic to the deep sea. However, a reliable methodology that facilitates an automated measurement of abundance and identity of microplastics is still lacking. We present an analytical protocol that applies focal plane array detector-based infrared imaging of microplastics enriched on membrane filters applicable to investigations of microplastic pollution of the environment. Abstract The pollution of the environment with microplastics (plastic pieces <5 mm) is a problem of increasing concern. However, although this has been generally recognised by scientists and authorities, the analysis of microplastics is often done by visual inspection alone with potentially high error rates, especially for smaller particles. Methods that allow for a fast and reliable analysis of microplastics enriched on filters are lacking. Our study is the first to fill this gap by using focal plane array detector-based micro-Fourier-transform infrared imaging for analysis of microplastics from environmental samples. As a result of our iteratively optimised analytical approach (concerning filter material, measuring mode, measurement parameters and identification protocol), we were able to successfully measure the whole surface (>10-mm diameter) of filters with microplastics from marine plankton and sediment samples. The measurement with a high lateral resolution allowed for the detection of particles down to a size of 20 μm in only a fractional part of time needed for chemical mapping. The integration of three band regions facilitated the pre-selection of potential microplastics of the ten most important polymers. Subsequent to the imaging the review of the infrared spectra of the pre-selected potential microplastics was necessary for a verification of plastic polymer origin. The approach we present here is highly suitable to be implemented as a standard procedure for the analysis of small microplastics from environmental samples. However, a further automatisation with respect to measurement and subsequent particle identification would facilitate the even faster and fully automated analysis of microplastic samples.


RSC Advances ◽  
2014 ◽  
Vol 4 (59) ◽  
pp. 31201-31209 ◽  
Author(s):  
Talia Hicks ◽  
Casparus J. R. Verbeek ◽  
Mark C. Lay ◽  
James M. Bier

Synchrotron-based Fourier-transform infrared (FTIR) spectroscopy was used to assess the effect of peracetic acid decolouring on the spatial distribution of secondary structures within particles of bloodmeal.


Jurnal MIPA ◽  
2013 ◽  
Vol 2 (2) ◽  
pp. 133
Author(s):  
Novvria Sagita ◽  
As'ari . ◽  
Wandayantolis .

Penelitian ini mengkaji lebih dalam perbedaaan pola curah hujan di Sulawesi Utara. Penelitian menggunakan data 12 stasiun atau pos pengamatan curah hujan di Sulawesi Utara dengan menggunakan teknik Fast Fourier Transform (FFT). Tujuan penelitian ini adalah membuat peta distribusi spasial periodisitas spektral curah hujan di wilayah Sulawesi Utara, sehingga dapat dianalisis fenomena cuaca yang mempengaruhi curah hujan di beberapa wilayah di Sulawesi Utara. Hasil penelitian ini menunjukkan bahwa Sulawesi Utara diklasifikasikan menjadi 2 tipe periodisitas curah hujan yang memiliki kekuatan kerapatan spektral tertinggi dengan periode 36 dasarian dan periode 18 dasarian. Sulawesi Utara juga diklasifikasikan menjadi 5 tipe periodisitas curah hujan yang memiliki kekuatan kerapatan spektral tertinggi ke dua dengan periode 3-11 dasarian, periode 18 dasarian, periode 36 dasarian, periode 60-110 dasarian dan periode 359 dasarian.This research examines more deeply the differences in rainfall patterns in Northern Sulawesi. This research use the data from 12 stations or rainfall observation posts in North Sulawesi by using the technique of Fast Fourier Transform (FFT). The purpose of this research is to create a spatial distribution map of rainfall spectral periodicity in North Sulawesi in order to analyze weather phenomena that affect rainfall in some areas in North Sulawesi. Based on the results of this study, North Sulawesi is classified into 2 types of rainfall periodicity having the highest spectral density power with the period of 36 ten-days (dasarian) and the period of 18 ten-days. North Sulawesi is also classified into 5 types of rainfall periodicity having the second highest spectral density power with the period of 3-11 ten-days, the period of 18 ten-days, the period of 36 ten-days, the period of 60-110 ten-days and the period of 359 ten-days.


Sign in / Sign up

Export Citation Format

Share Document