scholarly journals What’s down there? The structures, materials and environment of deep-seated slow slip and tremor

2021 ◽  
Vol 379 (2193) ◽  
pp. 20200218 ◽  
Author(s):  
Whitney M. Behr ◽  
Roland Bürgmann
Keyword(s):  
Subduction Zones ◽  
Source Region ◽  
Fluid Pressure ◽  
Plate Boundary ◽  
Seismogenic Zone ◽  
Slow Slip ◽  
Earthquake Dynamics ◽  
Plate Interface ◽  
Viscous Shear ◽  
Geophysical Imaging

Deep-seated slow slip and tremor (SST), including slow slip events, episodic tremor and slip, and low-frequency earthquakes, occur downdip of the seismogenic zone of numerous subduction megathrusts and plate boundary strike-slip faults. These events represent a fascinating and perplexing mode of fault failure that has greatly broadened our view of earthquake dynamics. In this contribution, we review constraints on SST deformation processes from both geophysical observations of active subduction zones and geological observations of exhumed field analogues. We first provide an overview of what has been learned about the environment, kinematics and dynamics of SST from geodetic and seismologic data. We then describe the materials, deformation mechanisms, and metamorphic and fluid pressure conditions that characterize exhumed rocks from SST source depths. Both the geophysical and geological records strongly suggest the importance of a fluid-rich and high fluid pressure habitat for the SST source region. Additionally, transient deformation features preserved in the rock record, involving combined frictional-viscous shear in regions of mixed lithology and near-lithostatic fluid pressures, may scale with the tremor component of SST. While several open questions remain, it is clear that improved constraints on the materials, environment, structure, and conditions of the plate interface from geophysical imaging and geologic observations will enhance model representations of the boundary conditions and geometry of the SST deformation process. This article is part of a discussion meeting issue ‘Understanding earthquakes using the geological record’.

Warm thermal structures in subduction zones lead to ample dehydration at the depths of deep slow slip and tremor and resultant transformations in viscous rheology 

2021 ◽  
Author(s):  
Cailey Condit ◽  
Victor Guevara ◽  
Melodie French ◽  
Adam Holt ◽  
Jonathan Delph
Keyword(s):  
Subduction Zones ◽  
Thermal Structure ◽  
Fluid Pressure ◽  
Plate Boundary ◽  
Pore Fluid ◽  
Seismogenic Zone ◽  
Plate Interface ◽  
Dehydration Reactions ◽  
Episodic Tremor And Slip ◽  
Increased Strength

<p>Feedbacks amongst petrologic and mechanical processes along the subduction plate boundary play a central role influencing slip behaviors and deformation styles. Metamorphic reactions, resultant fluid production, deformation mechanisms, and strength are strongly temperature dependent, making the thermal structure of these zones a key control on slip behaviors.</p><p> </p><p>Firstly, we investigate the role of metamorphic devolatilization reactions in the production of Episodic Tremor and Slip (ETS) in warm subduction zones. Geophysical and geologic observations of ETS hosting subduction zones suggest the plate interface is fluid-rich and critically stressed, which together, suggests that this area is a zone of near lithostatic pore fluid pressure.  Fluids and high pore fluid pressures have been invoked in many models for ETS. However, whether these fluids are sourced from local dehydration reactions in particular lithologies, or via up-dip transport from greater depths remains an open question. We present thermodynamic models of the petrologic evolution of four lithologies typical of the plate interface along predicted pressure–temperature (P-T) paths for the plate boundary along Cascadia, Nankai, and Mexico which all exhibit ETS at depths between 25-65 km. Our models suggest that 1-2 wt% H<sub>2</sub>O is released at the depths of ETS along these subduction segments due to punctuated dehydration reactions within MORB, primarily through chlorite and/or lawsonite breakdown. These reactions produce sufficient in-situ fluid across this narrow P-T range to cause high pore fluid pressures. Punctuated dehydration of oceanic crust provides the dominant source of fluids at the base of the seismogenic zone in these warm subduction margins, and up-dip migration of fluids from deeper in the subduction zone is not required to produce ETS-facilitating high pore fluid pressures. These dehydration reactions not only produce metamorphic fluids at these depths, but also result in an increased strength of viscous deformation through the breakdown of weak hydrous phases (e.g., chlorite, glaucophane) and the growth of stronger minerals (e.g., garnet, omphacite, Ca-amphibole). Lastly, we present preliminary data on viscosity along warm subduction paths showing the locations of these dehydration pulses correlate with viscosity increases in mafic lithologies along the shallow forarc.</p>

scholarly journals Effects of episodic slow slip on seismicity and stress near a subduction-zone megathrust

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Saeko Kita ◽  
Heidi Houston ◽  
Suguru Yabe ◽  
Sachiko Tanaka ◽  
Youichi Asano ◽  
...  
Keyword(s):  
Subduction Zones ◽  
Fluid Pressure ◽  
Plate Boundary ◽  
Slow Slip ◽  
Plate Interface ◽  
B Values ◽  
Megathrust Earthquakes ◽  
Cyclic Processes ◽  
Stress Orientations ◽  
Oceanic Slab

AbstractSlow slip phenomena deep in subduction zones reveal cyclic processes downdip of locked megathrusts. Here we analyze seismicity within a subducting oceanic slab, spanning ~50 major deep slow slip with tremor episodes over 17 years. Changes in rate, b-values, and stress orientations of in-slab seismicity are temporally associated with the episodes. Furthermore, although stress orientations in the slab below these slow slips may rotate slightly, in-slab orientations 20–50 km updip from there rotate farther, suggesting that previously-unrecognized transient slow slip occurs on the plate interface updip. We infer that fluid pressure propagates from slab to interface, promoting episodes of slow slip, which break mineral seals, allowing the pressure to propagate tens of km further updip along the interface where it promotes transient slow slips. The proposed methodology, based primarily on in-slab seismicity, may help monitor plate boundary conditions and slow slip phenomena, which can signal the beginning stages of megathrust earthquakes.

scholarly journals Slow slip source characterized by lithological and geometric heterogeneity

2020 ◽  
Vol 6 (13) ◽  
pp. eaay3314 ◽  
Author(s):  
Philip M. Barnes ◽  
Laura M. Wallace ◽  
Demian M. Saffer ◽  
Rebecca E. Bell ◽  
Michael B. Underwood ◽  
...  
Keyword(s):  
Subduction Zone ◽  
Subduction Zones ◽  
Source Region ◽  
Significant Proportion ◽  
Plate Motion ◽  
Direct Access ◽  
Slow Slip ◽  
Plate Interface ◽  
Slow Slip Events ◽  
Geophysical Imaging

Slow slip events (SSEs) accommodate a significant proportion of tectonic plate motion at subduction zones, yet little is known about the faults that actually host them. The shallow depth (<2 km) of well-documented SSEs at the Hikurangi subduction zone offshore New Zealand offers a unique opportunity to link geophysical imaging of the subduction zone with direct access to incoming material that represents the megathrust fault rocks hosting slow slip. Two recent International Ocean Discovery Program Expeditions sampled this incoming material before it is entrained immediately down-dip along the shallow plate interface. Drilling results, tied to regional seismic reflection images, reveal heterogeneous lithologies with highly variable physical properties entering the SSE source region. These observations suggest that SSEs and associated slow earthquake phenomena are promoted by lithological, mechanical, and frictional heterogeneity within the fault zone, enhanced by geometric complexity associated with subduction of rough crust.

scholarly journals Effects of episodic slow slip on seismicity and stress near a subduction-zone megathrust

2021 ◽  
Author(s):  
Saeko Kita ◽  
Heidi Houston ◽  
Suguru Yabe ◽  
Sachiko Tanaka ◽  
Youichi Asano ◽  
...  
Keyword(s):  
Subduction Zones ◽  
Plate Boundary ◽  
Slow Slip ◽  
Plate Interface ◽  
Kii Peninsula ◽  
B Values ◽  
Megathrust Earthquakes ◽  
Cyclic Processes ◽  
Stress Orientations ◽  
Oceanic Slab

Abstract Slow slip phenomena deep in subduction zones reveal cyclic processes downdip of locked megathrusts. Here we analyze seismicity within a subducting oceanic slab under Kii Peninsula, Japan, spanning nearly 50 major deep slow slip and tremor episodes over 17 years. Changes in rate, b-values, and stress orientations of inslab seismicity are temporally associated with the slow slip episodes. Furthermore, although stress orientations in the slab below these slow slips may rotate slightly, inslab orientations 20 to 50 km updip from there rotate significantly, suggesting previously-unrecognized transient slow slip occurs on the plate interface updip. We infer that fluid migrates from slab to interface, promoting episodes of slow slip, which break mineral seals, letting fluid migrate 10’s of km further updip along the interface where it promotes transient slow slips. The proposed methodology, based primarily on inslab seismicity, may help monitor plate boundary conditions and slow slip phenomena, which can signal the beginning stages of megathrust earthquakes.

A Significant Increase in Interplate Seismicity near Major Historical Earthquakes Offshore Martinique (FWI)

2021 ◽  
Author(s):  
Jordane Corbeau ◽  
O’Leary Gonzalez ◽  
Nathalie Feuillet ◽  
Anne-Marie Lejeune ◽  
Fabrice R. Fontaine ◽  
...  
Keyword(s):  
Subduction Zone ◽  
Subduction Zones ◽  
Plate Boundary ◽  
Historical Earthquakes ◽  
Seismogenic Zone ◽  
Plate Interface ◽  
Seismicity Rate ◽  
Rupture Area ◽  
Interplate Seismicity ◽  
Statistical Studies

ABSTRACT Understanding the processes that may be at the origin of major earthquakes in subduction zones is highly challenging, especially in the case of slowly converging areas such as the Lesser Antilles subduction zone. Our study reveals a recorded increase in seismicity rate and cumulative seismic moment over the last two decades offshore Martinique island and, particularly, in the presumed rupture area of the major historical 1839 earthquake. This sustained seismicity is shared between extensive intermediate depth activity since the 2007 Mw 7.4 earthquake that occurred about 20 km north of Martinique and a compressive seismic cluster located in the seismogenic zone of the subduction zone. We also observe a downward migration of the seismicity along the plate interface up to a 60–65 km depth and a recorded increase in the magnitudes of the earthquakes. All these observations may indicate ongoing changes along the plate boundary interface near the area of the historical major rupture of 1839, although more detailed statistical studies and additional data are necessary to confirm this trend.

scholarly journals New constraints on the 1922 Atacama, Chile, earthquake from Historical seismograms

2019 ◽  
Vol 219 (1) ◽  
pp. 645-661 ◽  
Author(s):  
Hiroo Kanamori ◽  
Luis Rivera ◽  
Lingling Ye ◽  
Thorne Lay ◽  
Satoko Murotani ◽  
...  
Keyword(s):  
Subduction Zones ◽  
Source Region ◽  
Plate Boundary ◽  
Spatial Proximity ◽  
Motion Data ◽  
Megathrust Earthquakes ◽  
Great Earthquakes ◽  
Chile Earthquake ◽  
Earthquake Research ◽  
Earthquake Research Institute

SUMMARY We recently found the original Omori seismograms recorded at Hongo, Tokyo, of the 1922 Atacama, Chile, earthquake (MS = 8.3) in the historical seismogram archive of the Earthquake Research Institute (ERI) of the University of Tokyo. These recordings enable a quantitative investigation of long-period seismic radiation from the 1922 earthquake. We document and provide interpretation of these seismograms together with a few other seismograms from Mizusawa, Japan, Uppsala, Sweden, Strasbourg, France, Zi-ka-wei, China and De Bilt, Netherlands. The 1922 event is of significant historical interest concerning the cause of tsunami, discovery of G wave, and study of various seismic phase and first-motion data. Also, because of its spatial proximity to the 1943, 1995 and 2015 great earthquakes in Chile, the 1922 event provides useful information on similarity and variability of great earthquakes on a subduction-zone boundary. The 1922 source region, having previously ruptured in 1796 and 1819, is considered to have significant seismic hazard. The focus of this paper is to document the 1922 seismograms so that they can be used for further seismological studies on global subduction zones. Since the instrument constants of the Omori seismographs were only incompletely documented, we estimate them using the waveforms of the observed records, a calibration pulse recorded on the seismogram and the waveforms of better calibrated Uppsala Wiechert seismograms. Comparison of the Hongo Omori seismograms with those of the 1995 Antofagasta, Chile, earthquake (Mw = 8.0) and the 2015 Illapel, Chile, earthquake (Mw = 8.3) suggests that the 1922 event is similar to the 1995 and 2015 events in mechanism (i.e. on the plate boundary megathrust) and rupture characteristics (i.e. not a tsunami earthquake) with Mw = 8.6 ± 0.25. However, the initial fine scale rupture process varies significantly from event to event. The G1 and G2, and R1 and R2 of the 1922 event are comparable in amplitude, suggesting a bilateral rupture, which is uncommon for large megathrust earthquakes.

Bringing slow slip processes into focus

2020 ◽  
Author(s):  
Rebecca Bell
Keyword(s):  
High Resolution ◽  
Subduction Zones ◽  
Seismic Velocity ◽  
Numerical Models ◽  
Fluid Pressure ◽  
Geophysical Methods ◽  
Rock Properties ◽  
Slow Slip ◽  
Velocity Models ◽  
The North

&lt;p&gt;The discovery of slow slip events (SSEs) at subduction margins in the last two decades has changed our understanding of how stress is released at subduction zones. Fault slip is now viewed as a continuum of different slip modes between regular earthquakes and aseismic creep, and an appreciation of seismic hazard can only be realised by understanding the full spectrum of slip. SSEs may have the potential to trigger destructive earthquakes and tsunami on faults nearby, but whether this is possible and why SSEs occur at all are two of the most important questions in earthquake seismology today. Laboratory and numerical models suggest that slow slip can be spontaneously generated under conditions of very low effective stresses, facilitated by high pore fluid pressure, but it has also been suggested that variations in frictional behaviour, potentially caused by very heterogeneous fault zone lithology, may be required to promote slow slip.&lt;/p&gt;&lt;p&gt;Testing these hypotheses is difficult as it requires resolving rock properties at a high resolution many km below the seabed sometimes in km&amp;#8217;s of water, where drilling is technically challenging and expensive. Traditional geophysical methods like travel-time tomography cannot provide fine-scale enough velocity models to probe the rock properties in fault zones specifically. In the last decade, however, computational power has improved to the point where 3D full-waveform inversion (FWI) methods make it possible to use the full wavefield rather than just travel times to produce seismic velocity models with a resolution an order of magnitude better than conventional models. Although the hydrocarbon industry have demonstrated many successful examples of 3D FWI the method requires extremely high density arrays of instruments, very different to the 2D transect data collection style which is still commonly employed at subduction zones.&lt;/p&gt;&lt;p&gt;&amp;#160;The north Hikurangi subduction zone, New Zealand is special, as it hosts the world&amp;#8217;s most well characterised shallow SSEs (&lt;2 km to 15 km below the seabed).&amp;#160; This makes it an ideal location to collect 3D data optimally for FWI to resolve rock properties in the slow slip zone. In 2017-2018 an unprecedentedly large 3D experiment including 3D multi-channel seismic reflection, 99 ocean bottom seismometers and 194 onshore seismometers was conducted along the north Hikurangi margin in an 100 km x 15 km area, with an average 2 km instrument spacing. In addition, IODP Expeditions 372 and 375 collected logging-while drilling and core data, and deployed two bore-hole observatories to target slow slip in the same area. In this presentation I will introduce you to this world class 3D dataset and preliminary results, which will enable high resolution 3D models of physical properties to be made to bring slow slip processes into focus. &amp;#160;&lt;/p&gt;

Afterslip and slow slip events in the postseismic deformation of the 2016 Pedernales earthquake, Ecuador

2020 ◽  
Author(s):  
Frederique Rolandone ◽  
Jean-Mathieu nocquet ◽  
Patricia Mothes ◽  
Paul Jarrin ◽  
Mathilde Vergnolle
Keyword(s):  
Subduction Zones ◽  
Postseismic Deformation ◽  
Slow Slip ◽  
Aseismic Slip ◽  
Plate Interface ◽  
Slow Slip Events ◽  
North East ◽  
Rupture Area ◽  
Slip Event ◽  
Seismic Swarms

&lt;p&gt;In subduction zones, slip along the plate interface occurs in various modes including earthquakes, steady slip, and transient accelerated aseismic slip during either Slow Slip Events (SSE) or afterslip. We analyze continuous GPS measurements along the central Ecuador subduction segment to illuminate how the different slip modes are organized in space and time in the zone of the 2016 Mw 7.8 Pedernales earthquake. The early post-seismic period (1 month after the earthquake) shows large and rapid afterslip developing at discrete areas of the megathrust and a slow slip event remotely triggered (&amp;#8764;100 km) south of the rupture of the Pedernales earthquake. We find that areas of large and rapid early afterslip correlate with areas of the subduction interface that had hosted SSEs in years prior to the 2016 earthquake. Areas along the Ecuadorian margin hosting regular SSEs and large afterslip had a dominant aseismic slip mode that persisted throughout the earthquake cycle during several years and decades: they regularly experienced SSEs during the interseismic phase, they did not rupture during the 2016 Pedernales earthquake, they had large aseismic slip after it. Four years after the Pedernales earthquake, postseismic deformation is still on-going. Afterslip and SSEs are both involved in the postseimsic deformation. Two large aftershocks (Mw 6.7 &amp; 6.8) occurred after the first month of postseismic deformation in May 18, and later in July 7 2016 two other large aftershocks (Mw 5.9 &amp; 6.3) occurred, all were located north east of the rupture. They may have triggered their own postseismic deformation. Several seismic swarms were identified south and north of the rupture area by a dense network of seismic stations installed during one year after the Pedernales earthquakes, suggesting the occurrence of SSEs. Geodetically, several SSEs were detected during the postseismic deformation either in areas where no SSEs were detected previously, or in areas where regular seismic swarms and repeating earthquakes were identified. The SSEs may have been triggered by the stress increment due to aftershocks or due to afterslip.&lt;/p&gt;

scholarly journals Tectonic tremor and deep slow slip on the Alpine Fault

2021 ◽  
Author(s):  
A Wech ◽  
C Boese ◽  
Timothy Stern ◽  
John Townend
Keyword(s):  
Lower Crust ◽  
Subduction Zones ◽  
Plate Boundary ◽  
P Wave ◽  
Plate Boundaries ◽  
Depth Range ◽  
Slow Slip ◽  
High Attenuation ◽  
Alpine Fault ◽  
Tectonic Tremor

Tectonic tremor is characterized by persistent, low-frequency seismic energy seen at major plate boundaries. Although predominantly associated with subduction zones, tremor also occurs along the deep extension of the strike-slip San Andreas Fault. Here we present the first observations of tectonic tremor along New Zealand's Alpine Fault, a major transform boundary that is late in its earthquake cycle. We report tectonic tremor that occurred on the central section of the Alpine Fault on 12days between March 2009 and October 2011. Tremor hypocenters concentrate in the lower crust at the downdip projection of the Alpine Fault; coincide with a zone of high P-wave attenuation (low Q p) and bright seismic reflections; occur in the 25-45km depth range, below the seismogenic zone; and may define the deep plate boundary structure extending through the lower crust and into the upper mantle. We infer this tremor to represent slow slip on the deep extent of the Alpine Fault in a fluid-rich region marked by high attenuation and reflectivity. These observations provide the first indication of present-day displacement on the lower crustal portion of the Australia-Pacific transform plate boundary. © Copyright 2012 by the American Geophysical Union.

Episodic fluid pressure cycling controls earthquake sequences on subduction megathrusts

2021 ◽  
Author(s):  
Luca Dal Zilio ◽  
Taras Gerya
Keyword(s):  
Fluid Flow ◽  
Finite Difference Methods ◽  
Fluid Pressure ◽  
Seismogenic Zone ◽  
Slow Slip ◽  
Aseismic Slip ◽  
Earthquake Physics ◽  
Megathrust Earthquakes ◽  
Pressure Cycling ◽  
Crustal Stresses

&lt;p&gt;A major goal in earthquake physics is to derive a constitutive framework for fault slip that captures the dependence of friction on lithology, sliding velocity, temperature, and pore fluid pressure. Here, we present a newly-developed two-phase flow numerical model &amp;#8212; which couples solid rock deformation and pervasive fluid flow &amp;#8212; to show how crustal stresses and fluid pressures within subducting megathrust evolve before and during slow slip and fast events. This unified 2D numerical framework couples inertial mechanical deformation and fluid flow by using finite difference methods, marker-in-cell technique, and poro-visco-elasto-plastic rheology. An adaptive time stepping allows the correct resolution of both long- and short-time scales, ranging from years to milliseconds during the dynamic propagation of dynamic rupture.&lt;/p&gt;&lt;p&gt;We investigate how permeability and its spatial distribution control the interseismic coupling along the megathrust interface, the interplay between seismic and aseismic slip, and the nucleation of large earthquakes. While a constant permeability leads to more regular seismic cycles, a depth dependent permeability contributes substantially to the development of two distinct megathrust zones: a shallow, locked seismogenic zone and a deep, narrow aseismic segment characterized by slow-slip events. Furthermore, we show that without requiring any specific friction law, our models reveal that permeability, episodic stress transfer and fluid pressure cycling control the predominant slip mode along the subduction megathrust. Furthermore, we analyze how rate dependent strength and dilatation affect rupture propagation and arrest. Our preliminary results show that fluid-solid poro-visco-elasto-plastic coupling behaves similarly to rate- and state-dependent friction. In this context, fluid pressure plays the role of state parameter whose time evolution is governed by: (i) the short-term elasto-plastic collapse of pores inside faults during the rupture (coseismic self-pressurization of faults) and (ii) the long-term pore-pressure diffusion from the faults into surrounding rocks (post- and interseismic relaxation of fluid pressure). This newly-developed numerical framework contributes to improve our understanding of the physical mechanisms underlying large megathrust earthquakes, and demonstrate that fluid play a key role in controlling the interplay between seismic and aseismic slip.&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document